Show results for
Refine by
Applications
- Particle Measurement Instruments for Non-Exhaust Vehicle Emissions
- Particle Measurement Instruments for Engine Emissions
- Particle Measurement Instruments for Non-Road Engine Emissions
- Monitors, gas analyzers solutions for semiconductor / microelectronics sector
- Monitors, gas analyzers solutions for ISO 14644-1/2: 2015 insights & solutions
- On-Line gas, particulate analyzers, flow monitors, data acquisition for combustion
- On-Line gas,particulate analyzers, flow monitors, data acquisition for cement plants
- On-Line gas,particulate analyzers, flow monitors, data acquisition for glass works
- On-Line gas,particulate analyzers, flow monitors, data acquisition for process control
- Process analyzers & instruments for tail gas treating unit (TGTU)
- Process analyzers & instruments for blending operations
- Gas analyzers and monitoring systems for Cement production
- Particle Measurement Instruments for Air Quality Monitoring
- Particle Measurement Instruments for Particle Filtration Research
- Particle Measurement Instruments for Occupational Health and Industrial Hygiene
- Monitors, gas analyzers solutions for pharmaceuticals / life sciences sector
- Monitors, gas analyzers solutions for photonics & optics
- Monitors, gas analyzers solutions for aerospace & defense industry
- Carbonaceous Aerosol Measurement Instruments for Black Carbon Car Emission Factors
- Precise detection instruments for research industry
- Air pollution, emission and process monitoring systems for natural gas
- Monitors, gas analyzers solutions for ISO 22716 solutions for cosmetics & personal care
- Gas detection analyzers solutions for oil & gas industry
- Multiprobes for Surface Water
- Multiprobes for Harmful Algal Bloom
- Multiprobes for Coastal
- Multiprobes for Stormwater
- Multiprobes for Aquaculture
- Multiprobes for Sourcewater
- Multiprobes for Groundwater
- Multiprobes for Dye Tracing
- Multiprobes for Dredging
- Multiprobes for Multiprobes for Dredging
- Multiprobes for Wastewater
- Multiprobes for Oil & Gas
- Multiprobes for Early Warning
- Gas detection analyzers solutions for chemical & pharmaceutical processes industry
- Gas detection analyzers solutions for pollution control industry
- Air Quality Monitors for Wildfires, Biomass & Tobacco
- Air Quality Monitors for Long-Term Stationary Monitoring
- Air Quality Monitors for Indoor Air Quality
- Solutions for potable water treatment sector
- Solutions for waste water treatment
- Water treatment solutions for swimming pool water treatment
- Process analyzers & instruments for feed gas SRU process control
- Process analyzers & instruments for trace moisture
- Process analyzers & instruments for sulfur in oils and fuel
- Process analyzers & instruments for portable
- Process analyzers & instruments for rack and benchmount
- Process analyzers & instruments for non hazardous areas
- Process analyzers & instruments for hazardous chemical & manufacturing process
- Process analyzers & instruments for aromatics in waste water
- Process analyzers & instruments for pharmaceutical production
- Process analyzers & instruments for contaminations and by products
- Process analyzers & instruments for hazardous chemical & manufacturing process
- Process analyzers & instruments for thin film/semiconductor/PVD
- Process analyzers & instruments for H2S
- Process analyzers & instruments for CO/CO2
- Process analyzers & instruments for color analysis
- Air quality and industrial gas monitoring systems for Water treatment
- Air quality and industrial gas monitoring systems for Medical, pharmaceutical, food & beverage
Sample Conditioning Equipment Supplied In Germany
168 equipment items found
Premium
Manufactured by:ENVEAÂ Â based inPoissy, FRANCE
The Natural Gas Sampling System 3000 is designed for very fast conditioning of samples from a pressurized natural gas source. Can be connected directly to a pipeline or a sampling cylinder containing compressed natural gas. The outlet of the sampling system can be connected directly to athe UT-3000 monitor for ...
Manufactured by:Process Insights, Inc.  based inHouston, TEXAS (USA)
ATOM Instrument offers sample conditioning systems engineered for use with our analyzers. Each sample conditioning system is specifically designed for the application and optimal performance of our analyzers. Gas Sampling System. Liquid to Gas Sampling System. Liquid Sampling ...
Premium
Manufactured by:Tekran Instruments Corporation  based inToronto, ONTARIO (CANADA)
The Tekran Model 3400-AIR Air Filtration System is an inexpensive, convenient conditioning unit for plant compressed air. The Tekran Series 3400 Mercury CEM requires two types of air in order to operate. Motive air is required to drive the inertial filter sample flow via an eductor. Zero Air is used for dilution and calibration functions. ...
Premium
Manufactured by:Tekran Instruments Corporation  based inToronto, ONTARIO (CANADA)
The Tekran Model 3425 Elemental & Oxidized Mercury Calibrator provides NIST traceable calibration gas for system calibration. The 3425 is an added, programmable calibration gas source that complements the standard calibration gas source already installed inside the 3400 HgCEMS, necessary to comply with USEPA and other government ...
Premium
Manufactured by:Tekran Instruments Corporation  based inToronto, ONTARIO (CANADA)
The Tekran Model 3400-WTR Water Filtration System is an inexpensive, convenient source of deionized, mercury free water for the Tekran 3400 Mercury CEM. With two stages of pre-filtration eliminating particulate and organic contamination, the final stage R/O membrane and ion-exchange filters have extremely long life. The Model 1306 can supply enough water for up to four CEM systems. The filter ...
Premium
Manufactured by:Tekran Instruments Corporation  based inToronto, ONTARIO (CANADA)
The Tekrarr Model 1308 Recirculating Water Purification System is an inexpensive, convenient source of deionized, mercury-free water for the Series 3300Xi Mercury CEM. The system has two stages of pre-filtration to eliminate all particulate and organic contamination in the water. A reverse osmosis (R/O) unit then removes the bulk of ionic material. Two stages of finishing ion exchange (IX) resin ...
Premium
Manufactured by:Tekran Instruments Corporation  based inToronto, ONTARIO (CANADA)
Tekran manufactures CVAFS mercury analytical systems for a wide range of industrial applications including coal-fired power plants, cement manufacturing, steel production, and incineration applications. The Tekran Mercury CEM (HgCEM) Systems are currently operating at over 130 sources to comply with strict US EPA regulations. In addition, there are numerous installations in Asia and Europe. For ...
Manufactured by:Topas GmbHÂ Â based inDresden, GERMANY
The Diffusion Dryer DDU 570 has been developed mainly as additional equipment for the Aerosol Generators produced by Topas GmbH. The diffusion dryer consists of an Acryl tube with 2 caps on its ends and tube connectors. In the operation status the dryer is filled with Silica gel. The aerosol to be dried is streaming through 3 screen pipes which are surrounded by Silica Gel (with indicator) ...
Manufactured by:Topas GmbHÂ Â based inDresden, GERMANY
The mechanical interaction of particles, especially solid ones, may cause undesirable levels of electrostatic charge. Test dusts must be generated with a high degree of reproducibility for instance when evaluating aerosol separation techniques such as cyclones, filters or impactors. Comparable results can only be obtained at controlled and similar charge levels. The electrostatic aerosol ...
Premium
Manufactured by:Tekran Instruments Corporation  based inToronto, ONTARIO (CANADA)
The Tekran Model 3400-OVEN is an integrated component of the 3400 System and provides a temperature controlled interface between the heated umbilical line and the 3400 cabinet. This heated zone is critical to ensure quantitative transfer of mercury species to the 3400 system while maintaining the same speciated mercury fractions that are present at the sample probe ...
Manufactured by:CM Technologies GmbHÂ Â based inGlueckstadt, GERMANY
The most common and cheapest way to get a representative sample is to use a drip sampler. Installation: The heavy oil sampler can be installed on any standard flange. MARPOL 73/78: Designed to comply with regulatory requirements in ...
Premium
Manufactured by:Tekran Instruments Corporation  based inToronto, ONTARIO (CANADA)
The Tekran Model 3443 is a customized version of an JCT Dilution Probe (Model JES-301). JCT probes are well-known for their dependability and ease of servicing. The probe incorporates a non-corrosive heated, replaceable Teflon filter element. The filter element is mounted in an electrically heated stainless steel housing covered by a thermal isolated weather protection enclosure. Temperature ...
Premium
Manufactured by:Tekran Instruments Corporation  based inToronto, ONTARIO (CANADA)
The Tekran Model 1304 Air Filtration System is an inexpensive, convenient conditioning unit for plant compressed air. The Series 3300 Mercury CEM requires two types of air in order to operate. Motive air is required to drive the inertial filter sample flow via an eductor. Zero Air is used for dilution and for the generation of calibration gas. ...
Manufactured by:Aerosol Magee Scientific Company  based inPortland, CALIFORNIA (USA)
Drying the aerosol sample stream is highly recommended to provide accurate measurement data and to protect equipment from water condensation. In hot, humid locations, the water vapor content of the ambient sample air may be very large. This can lead to inaccuracies in aerosol analysis such as the BC measurement – but, more seriously, there is the possibility of water condensation inside ...
Manufactured by:Dekati Ltd.  based inKangasala, FINLAND
The Dekati High Pressure Diluter DEED-300 is a two-stage dilution device for taking aerosol samples from high pressure conditions, such as in pre-DPF tailpipe emission measurements. The DEED-300 is designed especially for high pressure conditions, and it always keeps a constant dilution factor regardless of the sample pressure ...
Manufactured by:Dekati Ltd.  based inKangasala, FINLAND
The Dekati Cyclone is an all stainless-steel cyclone that is used as a part of a sampling system for removing large particles from an aerosol sample stream before the sample enters the measurement ...
Manufactured by:Dekati Ltd.  based inKangasala, FINLAND
The Dekati Smoking Machine is a versatile system for taking and diluting controlled puffs with adjustable volumes and profiles. Repeatable and adjustable puffs are important for characterizing and developing electronic cigarettes and other inhalable aerosol generators. The Dekati Smoking Machine is developed to allow real-time particle mass and size distribution measurements even from single ...
Manufactured by:Dekati Ltd.  based inKangasala, FINLAND
Dekati Oxidation Flow Reactor, DOFR, is a unique, all-in-one solution combining sample conditioning and an oxidation flow reactor for secondary aerosol (SA) formation ...
Manufactured by:Dekati Ltd.  based inKangasala, FINLAND
Dekati eDiluter Pro is a portable dilution system that allows easy sample conditioning for a wide range of particle measurement applications. Its compact structure includes a two-stage dilution system with an adjustable dilution factor ranging from 1:25 to 1:225. The high sample output of the Dekati eDiluter Pro allows the system to be fully ...
Manufactured by:Dekati Ltd.  based inKangasala, FINLAND
The Dekati eDiluter Pro 1200C is a modified version of the eDiluter Pro dilution system specifically designed for particle measurements from extreme temperatures such as measurements directly from a combustion zone or flame. The eDiluter Pro 1200C includes the standard eDiluter Pro unit combined with the Dekati High Temperature Sampling probe that enables particle sampling from up to 1200 °C. ...