Refine by
Applications
- Gas detection analyzers solutions for oil & gas industry
- Gas detection analyzers solutions for chemical & pharmaceutical processes industry
- Gas detection analyzers solutions for pollution control industry
- Gas Detection Solutions for monitoring process ovens, dryers & oxidizers
- Gas detection analyzers solutions for solvent based printing industry
- Water analyzers for Waste water
- Gas detection analyzers solutions for wastewater treatment industry
- Water analyzers for Process water
- Water analyzers for Refining industry
- Gas analyzers and monitoring systems for Industrial hygiene
- Process analyzers & instruments for SO2 emissions
- Process analyzers & instruments for H2S
- Water analyzers for Chemical industry
- Water analyzers for Power generation industry
- Water analyzers for pharmaceutical industry
- Water analyzers for Airports industry
- Gas analyzers and monitoring systems for Raw gas measurements
- Gas analyzers and monitoring systems for Compliance measurements
- Gas analyzers and monitoring systems for aluminum production sector
- Gas analyzers and monitoring systems for fertilizer and nitric acid production sector
- Gas analyzers and monitoring systems for greenhouse gases from ruminants
- Gas analyzers and monitoring systems for fire & material testing
- Particle Measurement Instruments for Non-Exhaust Vehicle Emissions
- Carbonaceous Aerosol Measurement Instruments for Black Carbon Car Emission Factors
- Gas detection analyzers solutions for coil coating industry
- Gas detection analyzers solutions for pulp & paper mills industry
- Water analyzers for Pure water and highly purified water
- Gas monitoring instruments and systems for stack testing according to EPA test method 320
- Gas analyzers and monitoring systems for carbon capture & storage (CCS)
- Gas monitoring instruments and systems for engine emissions measurements
- Gas monitoring instruments and systems for semiconductor manufacturing
- Gas monitoring instruments and systems for anesthetic gases
- Process analyzers & instruments for continuous emissions monitoring
- Process analyzers & instruments for stationary for outdoor applications
- Process analyzers & instruments for moisture in dryers and humidity
- Process analyzers & instruments for moisture in controlled ovens
- Process analyzers & instruments for pharmaceutical production
- Process analyzers & instruments for powder drying
- Process analyzers & instruments for oxygen measurement
- Process analyzers & instruments for CO emissions
- Process analyzers & instruments for moisture dew point of natural gas
- Process analyzers & instruments for moisture
- Process analyzers & instruments for CO/CO2
- Air quality and industrial gas monitoring systems for Ambient air monitoring
- Air quality and industrial gas monitoring systems for Road side air monitoring
- Air quality and industrial gas monitoring systems for Water treatment
- Air quality and industrial gas monitoring systems for Semiconductor
- Air quality and industrial gas monitoring systems for Medical, pharmaceutical, food & beverage
- Water analyzers for Manufacturing industry
- Water analyzers for Food and beverage industry
- Water analyzers for Agribusiness
Stream Sampling Equipment Supplied In Germany
95 equipment items found
Manufactured by:Aerosol Magee Scientific Company  based inPortland, CALIFORNIA (USA)
Drying the aerosol sample stream is highly recommended to provide accurate measurement data and to protect equipment from water condensation. In hot, humid locations, the water vapor content of the ambient sample air may be very large. This can lead to inaccuracies in aerosol analysis such as the BC measurement – but, more seriously, there ...
Premium
Manufactured by:J.U.M. Engineering GmbHÂ Â based inKarlsfeld, GERMANY
The Model VE 222 is an efficient, all heated and low pressure drop 2-stream sample sequencer, filter and interface for removing solids from two gaseous sample streams. The Model VE 222 utilizes two independent permanently installed all stainless steel mesh sample filters and two independent all stainless steel ...
Premium
Manufactured by:KISTERS AGÂ Â based inAachen, GERMANY
The type A four wheel bridge crane 4WBC is a collapsible unit intended for stream discharge measurement or for stream sediment sampling from a bridge. The 4WBC can deploy Columbus weights and sediment samplers up to 70 ...
Manufactured by:Dr. Thiedig GmbH & Co KGÂ Â based inBerlin, GERMANY
Combinable cooler for joint cooling of up to two sample streams. The axial segment cooler is used to hold up to two individual sample streams and cool them together in a compact stainless steel (1.4541) container. Several axial segment coolers can be connected to each other and have cooled intermediate water flowing through them ...
Premium
Manufactured by:KISTERS AGÂ Â based inAachen, GERMANY
For short to medium term gauging studies, the Riverina and Barossa Winches can be quickly mounted on the operating side support post, the discharge measurements taken and the winch packed up and moved to the next site. For permanent or long-term installations, the winch is generally located in a ...
Manufactured by:LAR Process Analysers - a brand by Process Insights, Inc.  based inBerlin, GERMANY
The FlowSampler is a patented sampling device from LAR which does not require filtration because the sample is siphoned-off from the sample stream towards the main flow direction of the water. Therefore, no large particles can get into the sample stream. The smaller particles are collected ...
Premium
Manufactured by:KISTERS AGÂ Â based inAachen, GERMANY
DH59 is an easy-to-use medium-weight suspended sediment sampler. The sampler consists of an epoxy coated, streamlined bronze casting weighing approx. 10 kg, which partially encloses the sample container. It is equipped with a tail vane assembly to orient the intake nozzle into the approaching flow as the sampler enters the water. ...
Manufactured by:Olfasense Group  based inKiel, GERMANY
The main benefit of the PureSniff system is that it allows the standardised presentation of undiluted odour samples. With a PureSniff device, you can measure an odour’s intensity, hedonic tone and pleasantness by the direct evaluation of an undiluted sample. As the operator triggers a volume flow, the odour sample streams ...
Manufactured by:Gröger & Obst Vertriebs- und Service GmbH  based inWolfratshausen, GERMANY
Continuous withdrawal of a filtered sample stream from a main water stream flowing ...
Premium
Manufactured by:Metrohm AGÂ Â based inHerisau, SWITZERLAND
This modular architecture enables the separation of the cabinets in different locations around a plant and the connection to up to 20 sample streams for time-saving sequential analysis at multiple areas inside of a plant. ...
by:Ozonetech - a Mellifiq brand  based inHägersten, SWEDEN
Its calibration is NIST traceable and the included pressure and temperature compensation ensure high accuracy under all conditions. The Model 450 is available either as a single stream unit or as a multi-channel unit capable of monitoring up to six individual sample streams. The unit has been designed to deliver excellent performance, high ...
Premium
Manufactured by:KISTERS AGÂ Â based inAachen, GERMANY
KISTERS’ double drum traveller DDT1000 Riverina Winch is a hand-operated double drum winch capable of handling gauging weights up to 110 kg (242 lb). The design offers these ...
Manufactured by:Gasmet Technologies - a Nederman company  based inVantaa, FINLAND
Gasmet heated Multipoint Sampling System MSSH is designed for online monitoring of multiple measuring points. Gasmet MSSH can be used with Gasmet CEMS ll e system. Gasmet MSSH is an ideal tool for sampling trace concentrations of pollutants in wet, corrosive gas streams, as the sample pump, filter and valves can be heated up to ...
Manufactured by:Olfasense Group  based inKiel, GERMANY
The LiGaVa system vaporises any kind of liquid into the gas phase. Because time, volume stream, temperature and amount of liquid are all known variables, it is a highly standardised odour sampling system. It is also simple to operate: just inject a set volume of the liquid sample (e.g. a fragrance, aromatic, alcohol or fuel) into the ...
Premium
Manufactured by:KISTERS AGÂ Â based inAachen, GERMANY
KISTERS’ Barossa winch is a hand-operated double drum winch capable of handling gauging weights up to 70 kg (154 lb). The design shows two main advantages: Firstly, it enables the operator to change from sounding mode to traversing mode very quickly by engaging the drive gears on each drum. Secondly, the double drum concept eases traversing, as the forces exerted by the gauging weight are ...
Premium
Manufactured by:KISTERS AGÂ Â based inAachen, GERMANY
KISTERS’ stream gauging winches are hand operated single drum winches capable of deploying sediment samplers or mechanical current meters with Columbus gauging weights. They can be deployed using a winch board (e.g. SAN22SS) or alternatively a bridge crane (e.g. 3WBC, ...
Manufactured by:Nautilus Marine Service GmbHÂ Â based inBuxtehude, GERMANY
Whether for borehole monitoring or ROV, stream gauging or harbour water levels – these instruments are trivial to install and operate. The units are completely sealed and are available rated up to 10,000dbar. Attach a 6 pin MCIL-6-FS connector with serial and power connectors and the data will stream. Serial baud and sampling rates are ...
Manufactured by:Gasmet Technologies - a Nederman company  based inVantaa, FINLAND
The Gasmet portable sampling system has been designed for portable emission monitoring measurements. It can be used for measuring trace concentrations of pollutants in wet, corrosive gas streams. The sample gas can be measured undiluted and without drying since the sample pump, heated filter and valve are all located in a module ...
Manufactured by:Dr. Thiedig GmbH & Co KGÂ Â based inBerlin, GERMANY
Automatically regenerating cation exchanger for maintenance-free operation. One of the most important parameters monitored in water-steam circuits is the acid conductivity. To determine this, classic cation exchangers have been used up to now before the conductivity measurement. The disadvantage of this technology is the regular resin exchange and, if necessary, its regeneration. The state of the ...
Premium
Manufactured by:Metrohm AGÂ Â based inHerisau, SWITZERLAND
The ADI 2045VA analyzer is based on the principle of Voltammetric Analysis. The analytical heart of the analyzer is the Metrohm 797 Computrace with Multi Mode Electrode (MME) or Rotating Disk Electrode (RDE) sensor options depending on the application. For online control of water and wastewater quality and industrial mining processes the analyzer is used to determine low concentrations of ...