Show results for
Refine by
Applications
- Breathing Life into Aquaculture: Thermal Mass Flow Meters in Fish Farming
- Measurements Solutions for Aerospace
- In-Line Systems for Testing and Automation Technology
- Solutions for Electronics Industry
- Measurements Solutions for Topography & Texture
- Measurements Solutions for Wedge & Prism Angle
- Measurements Solutions for Radius of Curvature
- Measurements Solutions for Optical Material Homogeneity
- Measurements Solutions for Total Thickness Variation (TTV)
- Measurements Solutions for Automotive
- Measurements Solutions for Consumer Electronics
- Measurements Solutions for Defense
- Measurements Solutions for New Space Optics
- Measurements Solutions for Optics & Photonics
- Measurements Solutions for Research
- Measurements Solutions for Semiconductor Industry
- Measurements Solutions for Start Up
- Measurements Solutions for Asphere & Freeform Metrology
- Measurements Solutions for Roughness Metrology of Aspheres & Freeforms
- Measurements Solutions for Datum & Relational Metrology
Surface Testing Equipment Supplied In Germany
72 equipment items found
Premium
Manufactured by:Zygo Corporation - AMETEK, Inc based inMiddlefield, CONNECTICUT (USA)
Simplify the complex – multiple surfaces create complex fringe patterns, the Verifire MST uses patented wavelength-shifting technology to acquire phase data from multiple surfaces simultaneously. Report key metrics from individual surfaces of parallel windows, transmitted wavefront, as well as precise surface-to-surface information like total thickness variation (TTV), wedge and even ...
Manufactured by:Erichsen GmbH & Co. KG based inHemer, GERMANY
The TINT TESTER 527 has been specially developed for measuring the brightness of dark pasty test coatings (e.g. applications of pigment pastes for determining the tinting strength according to ASTM D 3265 and ASTM D 2745). This model also enables standard brightness values to be measured on solid samples (lacquer layers, paper, plastic surfaces, etc.). ...
Manufactured by:Erichsen GmbH & Co. KG based inHemer, GERMANY
The Lacquer and Paint Testing Machine, Model 200, is a bench-mounted unit with a cast iron machine body and a cylindrical test head. Model 200 is used for the ERICHSEN CUPPING TEST in accordance with DIN ISO 1520, ISO 1520, BS 3900 : Part E4, NF T 30-019 und SIS 18 41 77 on coated sheet metal, with a tensile strength of 400 N/mm², up to 1.25 mm thick and from 70 - 90 mm wide. ...
Manufactured by:Erichsen GmbH & Co. KG based inHemer, GERMANY
Fully automatic cupping and deep-draw testing machine for testing the ductility of coated ferrous and non-ferrous metals (such as coil coatings, painted, plastic-coated or galvanized materials). This testing machine is electro-hydraulically driven and has a maximum pulling force of 200 kN. This testing machine is equipped with ...
Manufactured by:Erichsen GmbH & Co. KG based inHemer, GERMANY
Lacquer and Paint Testing Machine, Model 202 EM, with electromotive drive, equipped with a laterally opened test head, test tool in accordance with DIN EN ISO 1520, electric installation for connecting the illumination of the microscope as well as a digital display for the acquisition of the ERICHSEN cupping value, with integrated preselection counter for setting the maximum cupping value ...
Manufactured by:Erichsen GmbH & Co. KG based inHemer, GERMANY
An ideal instrument for applying defined layers of liquid media (e.g. as flexographic inks) onto absorbent or non-absorbent substrates for manufacturing repeatable sample presses that comes very close to conventional flexographic printing. The application conditions are determined using either the engraved anilox rollers or the wire-wound rollers. The AUTOMATIK K-LOX Roller 622 consists of an ...
Manufactured by:Erichsen GmbH & Co. KG based inHemer, GERMANY
The Model 475 density ball is used to quickly and easily determine the density of paints, coatings and other (non-paste) liquids. The Model 475 density ball consists of a spherical immersion body (stainless steel, material No. 1.4305) and a holding rod with a taper. The following versions are available: Model 475/I, with a volume of 100 ml ± 0.1%, (at 20 ° C), Model 475/II, similar but ...
Manufactured by:Erichsen GmbH & Co. KG based inHemer, GERMANY
The Model 263 indentation hardness tester consists of a metal block in which two pointed feet and the indenter are mounted. The indenter, made of hardened steel, is a wheel with a cutting-shaped (120°) ground edge. The total mass of the tester is 1000 ±5 g. The test load is set in the range of 4.90 N to 4.95 N (corresponding to 500 to 505 g). Thus, it meets the requirements of all ...
Manufactured by:Erichsen GmbH & Co. KG based inHemer, GERMANY
The cross-cut test is the oldest test method established worldwide for evaluating the adhesive strength of coating materials on substrates lying underneath, still has nothing lost of its popularity and validity and continues to be present across all industries, and even nearly ubiquitous. The evaluation of the test results according to valid standards, i.e. their assignment according to the ...
Manufactured by:Erichsen GmbH & Co. KG based inHemer, GERMANY
The PaintChecker mobile LED Blue 591 is a photothermal measuring device used for the non contact and non destructive determination of coating thicknesses in accordance with DIN EN 15042-2. Specially developed for the measurement of powder coatings before curing on various substrates such as steel, aluminium and ceramics. Cured coatings can also be measured. The precise layer thickness measurement ...
Manufactured by:Erichsen GmbH & Co. KG based inHemer, GERMANY
The ring marks punched into the stamp shaft, stepped at intervals of 50 N, also allow the load to be less than the standard 250 N pressing force. Pressing by hand is too unpredictable to ensure a consistent load from the rubber stamp on the test surface. Therefore, we recommend using a special stand. The lever is used to apply the contact pressure more easily and ...
Manufactured by:Royal Eijkelkamp based inGiesbeek, NETHERLANDS
In many land use systems worldwide soil deformation is a major problem arising from increasing land use intensity. Altered soil functions, in particular reduced hydraulic conductivities and impeded aeration, influence the top soil layers. This has an important effect on vulnerability to erosion, in particular. Assessing very thin soil layers like soil crusts requires very sensitive and highly ...
Premium
Manufactured by:RKI Analytical Instruments GmbH based inBad Homburg, GERMANY
Our new SD-1 line of smart transmitters feature state-of-the-art gas detectors with durable flameproof enclosure, best operability and maximum safety, especially in hydrogen/acethylene atmospheres. A simple magnetic control key is placed over clear marked positions on the surface plate to test and adjust the instrument without opening the transmitter in ...
Showcase
Manufactured by:Mass Flow Online B.V. based inRuurlo, NETHERLANDS
MASS‑STREAM MS‑105 up to 50 ln/min, with integrated TFT display. 6 gases pre‑installed: Air, N₂, O₂, Ar, CH₄, CO₂. Direct inline CTA sensor (no bypass). Rugged IP65 design, very low pressure drop, excellent repeatability, and low sensitivity to humidity or ...
Premium
Manufactured by:Komax AG based inDierikon, SWITZERLAND
The vision system VS100 has a drawer for placing one large to extra large test items. Correct assembly is checked using the camera and the line laser. The Vision System VS100 from Komax Testing offers highly advanced, precise and high-speed component verification. Its camera provides detailed images for easy and efficient evaluation using the Vision Studio nx ...
Manufactured by:Greiner GmbH based inPleidelsheim, GERMANY
Access height from 54 cm according to model and fittings of the dialysis chair. Compliance with stringent regulations, ease of access, clean surface finish, tested surfaces, sparing use of seams. 10 cm twin-wheel castors with central locking system if required. Footrest with automatic, patient-friendly length adjuster (removable). NEW: Option ...
by:herotec GmbH Flächenheizung based inAhlen, GERMANY
The tempusVOLT OUT 400 V outdoor heating mat is for the reliable removal and defrosting of snow and ice on paths, ramps, driveways and other surfaces. In the desired variants for screed/sand and mastic asphalt. They serve for more safety on these traffic surfaces. VDE-tested and CE-compliant. The ready-to-connect outdoor heating mat can be laid ...
Manufactured by:Rohmann GmbH based inFrankenthal, GERMANY
During steel production occasionally local hardening may occur on the surfaces of semi-finished products (e.g. heavy plates). In the further processing and later use of the finished products (e.g. longitudinal seam-welded tubes), this hardening (also called as "hard spots") can cause problems or lead to component failure. Thus relevant specifications increasingly require an ...
Manufactured by:Greiner GmbH based inPleidelsheim, GERMANY
Fixing of backrest in any position makes couch easier to push. Design compliant with stringent regulations, ease of access, clean surface finish, tested surfaces, minimum of seams. Soft upholstery (width of 60 cm), comfortably seating for patients of all sizes. Ease of access from front or side with folded-up armrest, access height of 54 cm. ...
Manufactured by:Greiner GmbH based inPleidelsheim, GERMANY
Emergency foot switch for Trendelenburg position, ensuring staff keep their hands free. Compliance with stringent regulations, ease of access, clean surface finish, tested surfaces, sparing use of seams. 12.5 cm castors for comfortable transporting, central braking system. Independently certified product safety and super ...