Refine by
Applications
- Channel Networks solutions for Seepage Water
- Channel networks solutions for replacement of measurement with inverted syphon sector
- Channel Networks - Fix Installation Measurements for hybrid flow measurement in main collector sector
- Channel Networks - Fix Installation Measurements for no shutting down the flow areas
- Particle Measurement Instruments for Non-Exhaust Vehicle Emissions
- Channel Networks - Fix Installation Measurements for Flow Measurement In Pipe That Could Not Be Shut Down
- Dedusting Filter Elements for the Pharmaceutical Industry
- Dedusting Filter Elements for the Food Industry
- Filter Elements for Additive Manufacturing
- Filter Elements for Chemistry & Pharmacy
- Filter Elements for Metal Working & Processing
- Filter Elements for Plastics Industry
- Filter Elements for Containment Industry
- Filter Elements for Pigment Manufacturing & Processing
- Filter Elements for Pigment Manufacturing & Processing
- Filter Elements for Surface Technology
- Filter Elements for Mining Industry
- Filter Elements for Air Purifier, Virus Sterilizer
- Filter Elements for Wood Working & Processing
- Multiprobes for Surface Water
- Multiprobes for Harmful Algal Bloom
- Multiprobes for Coastal
- Multiprobes for Stormwater
- Multiprobes for Aquaculture
- Multiprobes for Sourcewater
- Multiprobes for Groundwater
- Multiprobes for Dye Tracing
- Multiprobes for Dredging
- Multiprobes for Multiprobes for Dredging
- Multiprobes for Wastewater
- Multiprobes for Oil & Gas
- Multiprobes for Early Warning
- Pleated Filter Elements for Dust Removal and Air Filtration
- Laboratory and industrial ovens and furnaces solutions for research / university industry
- Measurements Solutions for New Space Optics
- Measurements Solutions for Research
- Measurements Solutions for Start Up
- Measurements Solutions for Topography & Texture
- Measurements Solutions for Wedge & Prism Angle
- Measurements Solutions for Radius of Curvature
- Measurements Solutions for Semiconductor Industry
- Solutions for waste water treatment
- Measurements Solutions for Optics & Photonics
- Laboratory and industrial ovens and furnaces solutions for electronics industry
- Laboratory and industrial ovens and furnaces solutions for materials research sector
- Heat transfer products solutions for the industrial process sector
- Air quality and industrial gas monitoring systems for Ambient air monitoring
- Industrial equipment solutions for oil and gas industry
- Industrial equipment solutions for mechanical engineering areas
- Industrial equipment solutions for well servicing areas
- Measurements Solutions for Aerospace
- Laboratory and industrial ovens and furnaces solutions for automotive industry
- Air Pollution Measurements for Education
- Heat transfer products solutions for the industrial refrigeration sector
- Pressure sensor for Machine and plant construction
- Laboratory and industrial ovens and furnaces solutions for aerospace industry
- High Performance Preparation Technology for Dry Mortar and Plaster
- Mixing and Grinding Technology for Sand Lime Brick
- Preparation Technology for the Ceramic Industry
- Cutting-Edge Technologies for Refractory Compounds
- Mixing and Grinding Technology for Preparation of Glass Batches
- Mixing and Grinding Technology for Lead Acid Paste
- Trailblazing Process Technology for Lithium-Ion Batteries
- Preparation Technology for Friction Lining Compounds
- Mixing and Grinding Technology for Foundry Sand
- Preparation Technologies for Metallurgy
- Mixing and Grinding Technology for Environmental
- Eirich System Solutions for Fertilizer
- Measurements Solutions for Automotive
- Measurements Solutions for Consumer Electronics
- Measurements Solutions for Defense
- Measurements Solutions for Asphere & Freeform Metrology
- Measurements Solutions for Roughness Metrology of Aspheres & Freeforms
- Measurements Solutions for Datum & Relational Metrology
- Air quality and industrial gas monitoring systems for Road side air monitoring
Xprt Equipment Supplied In Germany
52,958 equipment items found
Showcase
Manufactured by:Analytik Jena - Lab-loving people based inJena, GERMANY
Quality is the difference: Unique application diversity (TS, TC, TX, TOC, TIC, EC, AOC). Low maintenance and low operating costs. Fully automated solids sampler with high sample ...
Showcase
Manufactured by:BD|SENSORS GmbH based inThierstein, GERMANY
The differential pressure transmitter DPT 200 has been especially designed for the process industry and can be used for level measurement of closed, pressurized tanks, pump or filter controlling, etc. The possibility passes different pressure seals at the DPT 200 adding with different membrane materials to reach an optimal adaptation to the application. Features: - differential pressure von 1 ...
Showcase
Manufactured by:Stevens Water Monitoring Systems, Inc. based inPortland, OREGON (USA)
The HydraGO and HydraGO FLEX represent the most advanced portable soil sensor system. Simply insert the probe into the soil, and tap on the “Sample” button in the HydraGO app. The HydraGO and HydraGO FLEX communicate wirelessly with your smartphone or tablet using Bluetooth. Both systems features a rugged, Delran housing that contains a rechargeable battery. The internal battery will ...
Showcase
Manufactured by:Dosch Messapparate GmbH based inBerlin, GERMANY
The level switch type 89 is used to control liquid levels regardless of difficult operating conditions. The unit is designed for constant and long-term maintenance-free operation. According to customer specification and conditions, many variants in material, process connection and function are ...
Showcase
Manufactured by:Komax AG based inDierikon, SWITZERLAND
The Zeta 630 increases productivity in control cabinet construction with two process modules from batch size 1 and with up to 36 different wires in the wire changer. The wide variability of control cabinet construction requires many materials such as wire types, terminals or ferrules. The Zeta 630 allows just-in-time processing in batch or sequence production of various wires for cabinet building ...
Showcase
Manufactured by:Stevens Water Monitoring Systems, Inc. based inPortland, OREGON (USA)
The Dyacon Meteorological Station MS-130 is a preconfigured weather monitoring device that requires no programming or specialized setup. This station is shipped with control module (data logger) with a cell module, solar panel, and the following sensors: wind and wind direction (with wind gust and direction averaging), barometric pressure, relative humidity, and ambient temperature. Other ...
Showcase
Manufactured by:Dosch Messapparate GmbH based inBerlin, GERMANY
These devices are suitable for use cases involving shocks at the installation location, in contaminated media, and for mobile operation in any location. The use of a pitot tube enables even lower flows to be monitored. The flexible bellows seal prevents the function from being affected by metal chips, which are to be anticipated during lubricating oil checks on gear ...
Showcase
Manufactured by:Mass Flow Online B.V. based inRuurlo, NETHERLANDS
MASS‑STREAM MS‑105 up to 50 ln/min, with integrated TFT display. 6 gases pre‑installed: Air, N₂, O₂, Ar, CH₄, CO₂. Direct inline CTA sensor (no bypass). Rugged IP65 design, very low pressure drop, excellent repeatability, and low sensitivity to humidity or ...
Showcase
Manufactured by:LNI Swissgas based inVersoix, SWITZERLAND
H2 POWER 10L is a system able to provide up to 1Nm3/h of hydrogen. The hydrogen is produced from three Hydrogen Generators “6920.16.330” connected in parallel mode. 6920.16.330 uses an electrolytic cell with polymeric membrane (PEM) to produce pure hydrogen from distilled water. No acid or alkaline solutions are used. It is provided with an internal 1.1 litres tank with electronic ...
Showcase
Manufactured by:Sierra Instruments, Inc. based inMonterey, CALIFORNIA (USA)
Sierra was the first to introduce multivariable mass vortex flow meters to the market in the late 1990s with the InnovaMass "S-Series" product line--the 240S and 241S. The InnovaMass 240S inline version is a true workhorse in applications ranging from large pipes and ducts, to high pressure and saturated or superheated steam. The InnovaMass 241S is manufactured as a volumetric only version or a ...
Showcase
Manufactured by:LNI Swissgas based inVersoix, SWITZERLAND
POLLUCE is designed to satisfy the needs of all LCMS brand on the market. It makes use of Pressure Swing Adsorption technology (PSA), through the use of specific selected molecular sieves (CMS), enable to obtain extremely pure nitrogen, this technologies reduced risk of gas contamination and ...
Showcase
Manufactured by:BUCHI based inFlawil, SWITZERLAND
Pre-incineration unit for ash determination. The Wet Digester B-440 is an ecological pre-incineration unit for ash determination in different sample types. Select from a wide temperature range of up to 600 °C for more flexibility. Improve reproducibility with programmable incineration ...
Showcase
Manufactured by:Nippon Genetics Europe based inDueren, GERMANY
The FastGene® Agarose was developed for a rapid separation of DNA fragments, such as PCR products and plasmid DNA, as well as RNA fragments. The very high quality was graded as suitable for molecular biology. The purity of the agarose leads to an excellent transparency and a low background. This is especially important to obtain sharp and well defined DNA and/or RNA bands with the highest ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
Rubber adapter for manifold valve SJ 29/32 12 ...
Premium
Manufactured by:LNI Swissgas based inVersoix, SWITZERLAND
The HydroGen series HG PRO M can generate up to 20 L/min of Hydrogen with purity better than 99.99999% and pressure up to 16 bar (232 psi). The HG PRO M includes a new long life multilayer electrolytic cell with polymeric membrane (PEM) using ultra pure water. No acid or alkaline solutions are used. The two-column PSA drying system with automatic regeneration ensures the maximum grade of hydrogen ...
Premium
Manufactured by:LNI Swissgas based inVersoix, SWITZERLAND
NG SIRIO produces laboratory high grade nitrogen for most of the laboratory applications and equipments. Designed with safety and convenience in mind, this system generates purified nitrogen, eliminating the need for inconvenient cumbersome high-pressure gas cylinders. The NG SIRIO removes oxygen from air to less than 5 ppm and HC pollutants to less than 0.1ppm (if the optional scrubber is ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
Synchronized sample solutions. Our parallel evaporation instruments offer synchronized sample solutions in two configurations: SyncorePlus Analyst lets you evaporate samples to a specified volume as a pre-analytical step. SyncorePlus Polyvap enables the highest sample ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
Closely monitoring key parameters such as moisture, fat or protein is crucial to correct deviations occurring in any manufacturing process. BUCHI NIR-Online analyzers continuously provide accurate measurements within seconds to guarantee maximum production ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
The efficient way of cooling: The efficient way of cooling during evaporation, extraction or Kjeldahl comes courtesy of the Recirculating Chiller F-305 / F-308 / F-314. Combine with the Rotavapor® R-300 to gain more automation, more accuracy and more energy and time ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
Fitting to your needs and environment. Perform any flash or prep HPLC application easily and safely with our extremely compact Pure Chromatography Systems. The Pure platform is fitting to your needs and environment and offers maximal user and sample safety, while using minimal ...