Refine by
Applications
- Channel Networks solutions for Seepage Water
- Channel networks solutions for replacement of measurement with inverted syphon sector
- Channel Networks - Fix Installation Measurements for hybrid flow measurement in main collector sector
- Channel Networks - Fix Installation Measurements for no shutting down the flow areas
- Particle Measurement Instruments for Non-Exhaust Vehicle Emissions
- Channel Networks - Fix Installation Measurements for Flow Measurement In Pipe That Could Not Be Shut Down
- Dedusting Filter Elements for the Pharmaceutical Industry
- Dedusting Filter Elements for the Food Industry
- Filter Elements for Additive Manufacturing
- Filter Elements for Chemistry & Pharmacy
- Filter Elements for Metal Working & Processing
- Filter Elements for Plastics Industry
- Filter Elements for Containment Industry
- Filter Elements for Pigment Manufacturing & Processing
- Filter Elements for Pigment Manufacturing & Processing
- Filter Elements for Surface Technology
- Filter Elements for Mining Industry
- Filter Elements for Air Purifier, Virus Sterilizer
- Filter Elements for Wood Working & Processing
- Multiprobes for Surface Water
- Multiprobes for Harmful Algal Bloom
- Multiprobes for Coastal
- Multiprobes for Stormwater
- Multiprobes for Aquaculture
- Multiprobes for Sourcewater
- Multiprobes for Groundwater
- Multiprobes for Dye Tracing
- Multiprobes for Dredging
- Multiprobes for Multiprobes for Dredging
- Multiprobes for Wastewater
- Multiprobes for Oil & Gas
- Multiprobes for Early Warning
- Pleated Filter Elements for Dust Removal and Air Filtration
- Laboratory and industrial ovens and furnaces solutions for research / university industry
- Measurements Solutions for New Space Optics
- Measurements Solutions for Research
- Measurements Solutions for Start Up
- Measurements Solutions for Topography & Texture
- Measurements Solutions for Wedge & Prism Angle
- Measurements Solutions for Radius of Curvature
- Measurements Solutions for Semiconductor Industry
- Solutions for waste water treatment
- Measurements Solutions for Optics & Photonics
- Laboratory and industrial ovens and furnaces solutions for electronics industry
- Laboratory and industrial ovens and furnaces solutions for materials research sector
- Heat transfer products solutions for the industrial process sector
- Air quality and industrial gas monitoring systems for Ambient air monitoring
- Industrial equipment solutions for oil and gas industry
- Industrial equipment solutions for mechanical engineering areas
- Industrial equipment solutions for well servicing areas
- Measurements Solutions for Aerospace
- Laboratory and industrial ovens and furnaces solutions for automotive industry
- Air Pollution Measurements for Education
- Heat transfer products solutions for the industrial refrigeration sector
- Pressure sensor for Machine and plant construction
- Laboratory and industrial ovens and furnaces solutions for aerospace industry
- High Performance Preparation Technology for Dry Mortar and Plaster
- Mixing and Grinding Technology for Sand Lime Brick
- Preparation Technology for the Ceramic Industry
- Cutting-Edge Technologies for Refractory Compounds
- Mixing and Grinding Technology for Preparation of Glass Batches
- Mixing and Grinding Technology for Lead Acid Paste
- Trailblazing Process Technology for Lithium-Ion Batteries
- Preparation Technology for Friction Lining Compounds
- Mixing and Grinding Technology for Foundry Sand
- Preparation Technologies for Metallurgy
- Mixing and Grinding Technology for Environmental
- Eirich System Solutions for Fertilizer
- Measurements Solutions for Automotive
- Measurements Solutions for Consumer Electronics
- Measurements Solutions for Defense
- Measurements Solutions for Asphere & Freeform Metrology
- Measurements Solutions for Roughness Metrology of Aspheres & Freeforms
- Measurements Solutions for Datum & Relational Metrology
- Air quality and industrial gas monitoring systems for Road side air monitoring
Xprt Equipment Supplied In Germany
52,950 equipment items found
Showcase
Manufactured by:ENVEA based inPoissy, FRANCE
CAI PAS Sense analyzers use photoacoustic infrared technology to measure many of the most commonly measured IR-absorbing gases. Gas selectivity is achieved through the use of optical filters that provide both a means of detecting the gas of interest and compensating for interfering gases and water. Both bench-top and rack-mounted PAS configurations are ...
Showcase
Manufactured by:BUCHI based inFlawil, SWITZERLAND
Pre-incineration unit for ash determination. The Wet Digester B-440 is an ecological pre-incineration unit for ash determination in different sample types. Select from a wide temperature range of up to 600 °C for more flexibility. Improve reproducibility with programmable incineration ...
Showcase
Manufactured by:Dosch Messapparate GmbH based inBerlin, GERMANY
These devices are suitable for use cases involving shocks at the installation location, in contaminated media, and for mobile operation in any location. The use of a pitot tube enables even lower flows to be monitored. The flexible bellows seal prevents the function from being affected by metal chips, which are to be anticipated during lubricating oil checks on gear ...
Showcase
Manufactured by:LNI Swissgas based inVersoix, SWITZERLAND
POLLUCE is designed to satisfy the needs of all LCMS brand on the market. It makes use of Pressure Swing Adsorption technology (PSA), through the use of specific selected molecular sieves (CMS), enable to obtain extremely pure nitrogen, this technologies reduced risk of gas contamination and ...
Showcase
Manufactured by:Stevens Water Monitoring Systems, Inc. based inPortland, OREGON (USA)
The HydraGO and HydraGO FLEX represent the most advanced portable soil sensor system. Simply insert the probe into the soil, and tap on the “Sample” button in the HydraGO app. The HydraGO and HydraGO FLEX communicate wirelessly with your smartphone or tablet using Bluetooth. Both systems features a rugged, Delran housing that contains a rechargeable battery. The internal battery will ...
Showcase
Manufactured by:BD|SENSORS GmbH based inThierstein, GERMANY
The differential pressure transmitter DPT 200 has been especially designed for the process industry and can be used for level measurement of closed, pressurized tanks, pump or filter controlling, etc. The possibility passes different pressure seals at the DPT 200 adding with different membrane materials to reach an optimal adaptation to the application. Features: - differential pressure von 1 ...
Showcase
Manufactured by:Weda Robotics based inSödertälje, SWEDEN
YT-600 is a remote controlled vehicle for sediment (sludge) removal in all sorts of reservoirs'. The powerful on-board submersible pump and wide nozzle allows for efficient cleaning of large bottom surfaces. The sediment is pumped through a hose to a seleceted discharge point or to a filter. Traditional cleaning after draining and then removal of the sediment requires the reservoir to be taken ...
Showcase
Manufactured by:Mass Flow Online B.V. based inRuurlo, NETHERLANDS
MASS‑STREAM MS‑105 up to 50 ln/min, with integrated TFT display. 6 gases pre‑installed: Air, N₂, O₂, Ar, CH₄, CO₂. Direct inline CTA sensor (no bypass). Rugged IP65 design, very low pressure drop, excellent repeatability, and low sensitivity to humidity or ...
Showcase
Manufactured by:LNI Swissgas based inVersoix, SWITZERLAND
H2 POWER 10L is a system able to provide up to 1Nm3/h of hydrogen. The hydrogen is produced from three Hydrogen Generators “6920.16.330” connected in parallel mode. 6920.16.330 uses an electrolytic cell with polymeric membrane (PEM) to produce pure hydrogen from distilled water. No acid or alkaline solutions are used. It is provided with an internal 1.1 litres tank with electronic ...
Showcase
Manufactured by:C&G Evaporator based inRignano S.Arno (Firenze), ITALY
High quality condensate. Energy consumption is reduced to a minimum by using a heat pump in a vacuum. With an absolute pressure of ≈ 33 mbar in the boiling chamber, evaporations occurs at very low temperatures (≈ 35 ºC). Volumes treated 150 – 30,000 litres/day. Volumes processed 150 – 30,000 ...
Showcase
Manufactured by:Stevens Water Monitoring Systems, Inc. based inPortland, OREGON (USA)
The Dyacon Meteorological Station MS-130 is a preconfigured weather monitoring device that requires no programming or specialized setup. This station is shipped with control module (data logger) with a cell module, solar panel, and the following sensors: wind and wind direction (with wind gust and direction averaging), barometric pressure, relative humidity, and ambient temperature. Other ...
Showcase
Manufactured by:Analytik Jena - Lab-loving people based inJena, GERMANY
Quality is the difference: Unique application diversity (TS, TC, TX, TOC, TIC, EC, AOC). Low maintenance and low operating costs. Fully automated solids sampler with high sample ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
When a purification has to be scaled up, GlasPure offers maximum flexibility in terms of scale and separation requirements. The glass columns are designed for sample amounts over 300 g and pressure up to 50 bar (725 ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
EX-protection fulfilling highest safety levels. Safety comes first! Especially when it comes to the Rotavapor® R-250 EX! The EX-protection is designed to fulfill the harshest working environment needs. Experience the highest safety level of industrial distillation with a flask size of up to ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
Set new standards for digestion speed, flexible use and result reproducibility with the IR SpeedDigester. Achieve higher sample throughput for nitrogen determination by Kjeldahl digestion and multiply functionality with this entry level IR ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
Sepiatec’s SFC-M5 system is a preparative system for separating chiral and achiral samples using supercritical fluid chromatography. The system is available in the product variants M5 50 and M5 250. The SFC-M5 system consists of the main module and the collector module. Both modules form a functional unit that can be configured in a variety of ways with different equipment. The main module ...
Premium
Manufactured by:LNI Swissgas based inVersoix, SWITZERLAND
The NitroGen series NG CASTORE XS iQ are Membrane Nitrogen Generators. They are engineered to transform standard compressed air into a safe, regulated supply of Nitrogen up to 36l/min with a purity up to 99.9%. This NG series is equipped with a scroll built-in oil less compressor with inverter technology. The exclusive electronic flow control combined with the compressor control by the inverter ...
Premium
Manufactured by:LNI Swissgas based inVersoix, SWITZERLAND
The HydroGen series HG PRO M can generate up to 20 L/min of Hydrogen with purity better than 99.99999% and pressure up to 16 bar (232 psi). The HG PRO M includes a new long life multilayer electrolytic cell with polymeric membrane (PEM) using ultra pure water. No acid or alkaline solutions are used. The two-column PSA drying system with automatic regeneration ensures the maximum grade of hydrogen ...
Premium
Manufactured by:LNI Swissgas based inVersoix, SWITZERLAND
The HG KUBE is able to generate up to 260 cc/min of Hydrogen with purity better than 99.9996% and pressure up to 9 bar (130 psi). The HG KUBE includes a cell with polymeric membrane (PEM) using distilled water. No acid or alkaline solutions are ...
Premium
Manufactured by:Kurita Water Industries Ltd based inTokyo, JAPAN
There are numerous sources of pitch and stickies that seriously affect the paper manufacturing process. Common methods for an effective control program are fixation, detackifying and dispersing. Sometimes a combination of all mentioned methods is the key. Whatever your problem is – our experts could address any pitch and sticky issue with our sophisticated Gilufix® additives, for ...