Refine by
Applications
- Channel Networks solutions for Seepage Water
- Channel networks solutions for replacement of measurement with inverted syphon sector
- Channel Networks - Fix Installation Measurements for hybrid flow measurement in main collector sector
- Channel Networks - Fix Installation Measurements for no shutting down the flow areas
- Particle Measurement Instruments for Non-Exhaust Vehicle Emissions
- Channel Networks - Fix Installation Measurements for Flow Measurement In Pipe That Could Not Be Shut Down
- Dedusting Filter Elements for the Pharmaceutical Industry
- Dedusting Filter Elements for the Food Industry
- Filter Elements for Additive Manufacturing
- Filter Elements for Chemistry & Pharmacy
- Filter Elements for Metal Working & Processing
- Filter Elements for Plastics Industry
- Filter Elements for Containment Industry
- Filter Elements for Pigment Manufacturing & Processing
- Filter Elements for Pigment Manufacturing & Processing
- Filter Elements for Surface Technology
- Filter Elements for Mining Industry
- Filter Elements for Air Purifier, Virus Sterilizer
- Filter Elements for Wood Working & Processing
- Multiprobes for Surface Water
- Multiprobes for Harmful Algal Bloom
- Multiprobes for Coastal
- Multiprobes for Stormwater
- Multiprobes for Aquaculture
- Multiprobes for Sourcewater
- Multiprobes for Groundwater
- Multiprobes for Dye Tracing
- Multiprobes for Dredging
- Multiprobes for Multiprobes for Dredging
- Multiprobes for Wastewater
- Multiprobes for Oil & Gas
- Multiprobes for Early Warning
- Pleated Filter Elements for Dust Removal and Air Filtration
- Laboratory and industrial ovens and furnaces solutions for research / university industry
- Measurements Solutions for New Space Optics
- Measurements Solutions for Research
- Measurements Solutions for Start Up
- Measurements Solutions for Topography & Texture
- Measurements Solutions for Wedge & Prism Angle
- Measurements Solutions for Radius of Curvature
- Measurements Solutions for Semiconductor Industry
- Solutions for waste water treatment
- Measurements Solutions for Optics & Photonics
- Laboratory and industrial ovens and furnaces solutions for electronics industry
- Laboratory and industrial ovens and furnaces solutions for materials research sector
- Heat transfer products solutions for the industrial process sector
- Air quality and industrial gas monitoring systems for Ambient air monitoring
- Industrial equipment solutions for oil and gas industry
- Industrial equipment solutions for mechanical engineering areas
- Industrial equipment solutions for well servicing areas
- Measurements Solutions for Aerospace
- Laboratory and industrial ovens and furnaces solutions for automotive industry
- Air Pollution Measurements for Education
- Heat transfer products solutions for the industrial refrigeration sector
- Pressure sensor for Machine and plant construction
- Laboratory and industrial ovens and furnaces solutions for aerospace industry
- High Performance Preparation Technology for Dry Mortar and Plaster
- Mixing and Grinding Technology for Sand Lime Brick
- Preparation Technology for the Ceramic Industry
- Cutting-Edge Technologies for Refractory Compounds
- Mixing and Grinding Technology for Preparation of Glass Batches
- Mixing and Grinding Technology for Lead Acid Paste
- Trailblazing Process Technology for Lithium-Ion Batteries
- Preparation Technology for Friction Lining Compounds
- Mixing and Grinding Technology for Foundry Sand
- Preparation Technologies for Metallurgy
- Mixing and Grinding Technology for Environmental
- Eirich System Solutions for Fertilizer
- Measurements Solutions for Automotive
- Measurements Solutions for Consumer Electronics
- Measurements Solutions for Defense
- Measurements Solutions for Asphere & Freeform Metrology
- Measurements Solutions for Roughness Metrology of Aspheres & Freeforms
- Measurements Solutions for Datum & Relational Metrology
- Air quality and industrial gas monitoring systems for Road side air monitoring
Xprt Equipment Supplied In Germany
52,950 equipment items found
Showcase
Manufactured by:Dosch Messapparate GmbH based inBerlin, GERMANY
These devices are suitable for use cases involving shocks at the installation location, in contaminated media, and for mobile operation in any location. The use of a pitot tube enables even lower flows to be monitored. The flexible bellows seal prevents the function from being affected by metal chips, which are to be anticipated during lubricating oil checks on gear ...
Showcase
Manufactured by:Weda Robotics based inSödertälje, SWEDEN
YT-600 is a remote controlled vehicle for sediment (sludge) removal in all sorts of reservoirs'. The powerful on-board submersible pump and wide nozzle allows for efficient cleaning of large bottom surfaces. The sediment is pumped through a hose to a seleceted discharge point or to a filter. Traditional cleaning after draining and then removal of the sediment requires the reservoir to be taken ...
Showcase
Manufactured by:Mass Flow Online B.V. based inRuurlo, NETHERLANDS
MASS‑STREAM MS‑105 up to 50 ln/min, with integrated TFT display. 6 gases pre‑installed: Air, N₂, O₂, Ar, CH₄, CO₂. Direct inline CTA sensor (no bypass). Rugged IP65 design, very low pressure drop, excellent repeatability, and low sensitivity to humidity or ...
Showcase
Manufactured by:KISTERS AG based inAachen, GERMANY
HyQuant V is KISTERS’ state-of-the-art non-contact surface velocity 60 GHz V-band Doppler radar sensor. It offers superior resolution and accuracy, with reduced power consumption, all at an appealing price ...
Showcase
Manufactured by:LNI Swissgas based inVersoix, SWITZERLAND
POLLUCE is designed to satisfy the needs of all LCMS brand on the market. It makes use of Pressure Swing Adsorption technology (PSA), through the use of specific selected molecular sieves (CMS), enable to obtain extremely pure nitrogen, this technologies reduced risk of gas contamination and ...
Showcase
Manufactured by:Analytik Jena - Lab-loving people based inJena, GERMANY
Quality is the difference: Unique application diversity (TS, TC, TX, TOC, TIC, EC, AOC). Low maintenance and low operating costs. Fully automated solids sampler with high sample ...
Showcase
Manufactured by:Stevens Water Monitoring Systems, Inc. based inPortland, OREGON (USA)
The Dyacon Meteorological Station MS-130 is a preconfigured weather monitoring device that requires no programming or specialized setup. This station is shipped with control module (data logger) with a cell module, solar panel, and the following sensors: wind and wind direction (with wind gust and direction averaging), barometric pressure, relative humidity, and ambient temperature. Other ...
Showcase
Manufactured by:LNI Swissgas based inVersoix, SWITZERLAND
H2 POWER 10L is a system able to provide up to 1Nm3/h of hydrogen. The hydrogen is produced from three Hydrogen Generators “6920.16.330” connected in parallel mode. 6920.16.330 uses an electrolytic cell with polymeric membrane (PEM) to produce pure hydrogen from distilled water. No acid or alkaline solutions are used. It is provided with an internal 1.1 litres tank with electronic ...
Showcase
Manufactured by:ENVEA based inPoissy, FRANCE
CAI PAS Sense analyzers use photoacoustic infrared technology to measure many of the most commonly measured IR-absorbing gases. Gas selectivity is achieved through the use of optical filters that provide both a means of detecting the gas of interest and compensating for interfering gases and water. Both bench-top and rack-mounted PAS configurations are ...
Premium
Manufactured by:LNI Swissgas based inVersoix, SWITZERLAND
The multigas Sonimix 6000 C2 calibrator is designed to calibrate manually or by remote control up to 6 monitors installed in an air pollution monitoring station, for parameters such as SO2, HC, BTX, CO, NOx and O3. The Sonimix 6000 C2 includes Mass Flow Controllers, GPT, ozone and self re-generable zero air generator and is equipped with – an inlet for high concentration mixtures of diluted ...
Premium
Manufactured by:LNI Swissgas based inVersoix, SWITZERLAND
The BEAM 3.1 perform in 24/7 production process worldwide with utmost reliability. Even under the most challenging environments BEAM 3.1 guarantee frictionless industrial use for different applications (example: 3D Laser Printer / Powder Handling). The Generator produces a continuous flow of Nitrogen with Laser Grade. The BEAM 3.1 has been developed to meet specific requirements in term of gas, ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
FlashPure cartridges are offered in a wide range of sizes, covering different stationary phases, particle sizes and geometries. This enables the user to choose the flash cartridge which best suits his purification ...
Premium
Manufactured by:LNI Swissgas based inVersoix, SWITZERLAND
This H2-SENSOR Kit is a security system that constantly detects the amount of Hydrogen present in the GC’s oven and blocks the Hydrogen generation if it detects an amount greater than the safety threshold. The 6940.00.055 controller reads the percentage of Hydrogen measured by the sensor 6940.00.070 and, if the value exceeds the threshold alarm, the Controller deactivates the solenoid valve ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
Beaker flask 100 ml with rubber cap for direct connection to manifold valves including filter paper (75 μm, 100 pcs.) and O-ring (2 ...
Premium
Manufactured by:LNI Swissgas based inVersoix, SWITZERLAND
The NitroGen series CASTORE PRO HP are Membrane Nitrogen Generators. They are engineered to transform standard compressed air into a safe, regulated supply of Nitrogen with a purity greater than 99.5%. The exclusive electronic flow control allows to generate Nitrogen with a higher purity using a smaller volume of air which results in reduced energy costs and maintenance of any external ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
Sepiatec’s unique Sepbox systems allow samples to be processed automatically, and significantly accelerat the purification process. The Sepbox 2D product line includes the two models 2D-250 and 2D-2000. The Sepbox concept is based on a patented combination of High Performance Liquid Chromatography (HPLC) and Solid Phase Extraction (SPE) reliable and proven techniques that provide a ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
The Sepmatix SFC 8x parallel system combines Sepiatec’s proven parallel HPLC technology with the advantages of supercritical fluid chromatography. The result is the first SFC system with eight separating columns working in parallel, high operating speed and as yet unmatched performance. In a space of only a few minutes for example enantiomers can be separated on eight different chiral ...
Premium
Manufactured by:LNI Swissgas based inVersoix, SWITZERLAND
MODULO benches are designed for GC/MS systems. Various dimensions and models are available, all easy to configure with a modular design to meet user needs. The benches are equipped with sturdy wheels for easy moving of the system, and adjustable levelling legs for rock solid stability of the bench. GC system may need quite a lot of different generators, our MODULO benches has 2 Two 13U racks ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
Small particles, small samples, high yields. With the Nano Spray Dryer B-90 HP, gently process the smallest sample amounts into submicron particles with minimal product loss. The user-friendly system improves productivity in areas where small particles make a big ...
Premium
Manufactured by:LNI Swissgas based inVersoix, SWITZERLAND
The HydroGen series HGA RACK 19” 2U PRO is able to generate up to 600 cc/min Hydrogen with purity better than 99.99999% and pressure up to 16 bar (232 PSI). An AirGen output can deliver hydrocarbon free pure Air with a flow up to 2000 cc/min. The HGA RACK 19 inch 2U PRO includes an electrolytic cell with polymeric membrane (PEM) using distilled water. The two-column PSA drying system with ...