Refine by
Xprt Equipment Supplied In Guam
107 equipment items found
Manufactured by:Algorab S.r.l. based inLavis (TN), GUAM
P5-LVL is a wireless device for point-to-point remote control of lighting. It is used in near real-time management and diagnostic of the lamps and allows the integration of applications and services for Smart ...
Manufactured by:Algorab S.r.l. based inLavis (TN), GUAM
P5-IS2 is a wireless device for point-to-point lighting remote control. P5-NS2 belongs to the family of P5 light controllers, capable of communicating with each other to form a mesh-type WSN (Wireless Sensor Network), a network topology capable of reliably cover large ...
Manufactured by:Algorab S.r.l. based inLavis (TN), GUAM
P5-NS2 is a wireless device for point-to-point lighting remote control. P5-NS2 belongs to the family of P5 light controllers, capable of communicating with each other to form a mesh-type WSN (Wireless Sensor Network), a network topology capable of reliably covering large ...
Manufactured by:Algorab S.r.l. based inLavis (TN), GUAM
P5-IS2 is a wireless device for point-to-point lighting remote control. P5-IS2 belongs to the P5 family of light point controllers, capable of communicating with each other to form a mesh-type WSN (Wireless Sensor Network), a network topology capable of reliably covering large ...
Manufactured by:Algorab S.r.l. based inLavis (TN), GUAM
Wireless device for measuring temperature and humidity of the premises where it is positioned. P5-TWT is self-powered and communicates via radio using a WSN-type mesh ...
Manufactured by:Singer, a Mueller Brand based inKimball, TENNESSEE (USA)
The Oxy-Nitride stem is ideally suited to reclaimed water applications and a wide range of other applications where mineral-build up is a concern. When minerals build-up on stems, it can cause potential maintenance problems and operational malfunctions. The Oxy-Nitride treated stainless steel stem is the perfect solution. Its specialized proprietary aerated salt bath treatment will reduce or ...
Manufactured by:Singer, a Mueller Brand based inKimball, TENNESSEE (USA)
The X129 limit switch is actuated by the opening and closing of a main valve. The assembly is fully adjustable over the entire valve stroke. Layout variations allow up to four separate switches to be mounted and actuated off the same ...
Manufactured by:Singer, a Mueller Brand based inKimball, TENNESSEE (USA)
The X107 position indicator stem is designed to provide direct indication of the diaphragm / inner valve position. The indicator stem moves up and down within its protective hexagonal brass housing. Within the housing is clear Pyrex sight glass, which allows viewing from both sides. Singer main control valves are designed with a separate stem cap that makes installation of the X107 safe and ...
Manufactured by:Singer, a Mueller Brand based inKimball, TENNESSEE (USA)
The 106-F-Type 5 non-modulating float valve is based on the 106-PG main valve. It is ideal for allowing normal forward flow to fill water tanks to a desired high level and where the pilot and valve of the storage tanks are easily accessible. The valve functions as a two-position valve, either open or closed. The valve remains closed when the tank level drops, until the float reaches the ...
Manufactured by:Singer, a Mueller Brand based inKimball, TENNESSEE (USA)
The 106-A-Type 4 altitude control valves are based on the 106-PG main valve, and are ideal for maintaining a preset maximum water level. The valve functions as a two-position control valve, either fully open or fully closed. The Type 4 allows normal flow to fill the storage tank to the maximum level, then closes drip-tight at the set-point. It opens to refill the tank once the level drops an ...
Manufactured by:Singer, a Mueller Brand based inKimball, TENNESSEE (USA)
Singer Model 106 PDV-A-10508A Pneumatically Operated Control valve is based on the Singer Model 106 PG-UL Deluge main valve. The high capacity relay valve provides on-off position operation. The high capacity relay valve, using an independent air supply, either admits inlet pressure into the main valve operating chamber from the inlet of the main valve or releases pressure from the operating ...
Manufactured by:Singer, a Mueller Brand based inKimball, TENNESSEE (USA)
The 106-RPS and 206-RPS pressure relief valves are based on the 106-PG and 206-PG main valves. The 81-RP pilot senses the upstream pressure through a connection to the valve inlet. The valve and pilot remain closed until the inlet pressure exceeds the pilot setting. The valve opens rapidly to relieve damaging overpressure and closes smoothly at an adjustable speed, when the pressure returns below ...
Manufactured by:Singer, a Mueller Brand based inKimball, TENNESSEE (USA)
The 106-RPS-D and 206-RPS-D pressure differential sustaining valves are based on the 106-PG or 06-PG main valve. The RPS-D uses the 81-RPD pilot valve and has two sensing connections. The valve and pilot remain closed until the difference between the two pressures exceeds the pilot setting. Under flowing conditions, the pilot reacts to small changes in pressure to control the valve position by ...
Manufactured by:Singer, a Mueller Brand based inKimball, TENNESSEE (USA)
The 106-DW and 206-DW deep well pump control valves are installed in a tee between the pump discharge and the check valve. The valve is normally open, and, on pump start-up, a pilot solenoid is energized to start closing the valve at a rate governed by the closing speed ...
Manufactured by:Singer, a Mueller Brand based inKimball, TENNESSEE (USA)
The 106-HC and 206-HC hydraulic check valves are based on the 106-PG or 206-PG main valve. The valve functions as a two position valve - either fully open or fully closed. The HC allows one way flow only. Under normal forward flow, the valve opens as the higher inlet pressure lifts the inner valve assembly and the fluid in the upper chamber is discharged to the lower pressure, downstream side of ...
Manufactured by:Singer, a Mueller Brand based inKimball, TENNESSEE (USA)
The 106-PR-48 and 206-PR-48 series pressure reducing valves with low flow by-pass are based on the 106-PG or 206-PG main valve. In addition, a direct acting pressure reducing valve is piped in parallel, using the main valve back port connections. The pilot valve senses the downstream pressure through a connection at the main valve outlet. Under flowing conditions, the pilot reacts to small ...
Manufactured by:Singer, a Mueller Brand based inKimball, TENNESSEE (USA)
The 106-PR-S and 206-PR-S pressure reducing valves with downstream surge control are based on the 106-PG or 206-PG main valve. Pressure reducing pilot valve senses the downstream pressure through a connection at the valve outlet. Under flowing conditions, the pilot reacts to small changes in pressure to control the valve position by modulating the pressure above the diaphragm. The ...
Manufactured by:Singer, a Mueller Brand based inKimball, TENNESSEE (USA)
The Singer 106/206-2PR-630 Pressure Management Valve is a simple package to save water loss and money. It meets system needs by providing higher pressure when called for 24/7 and reduced pressure to save water leakage (and money) at all other times. An orifice with a low pressure drop 1.0 psi, (0.07 Bar) is installed upstream of a standard pressure reducing valve fitted with an extra pressure ...
Manufactured by:Singer, a Mueller Brand based inKimball, TENNESSEE (USA)
Singer models 106-SC and 206-SC solenoid control valves are based on the Singer model 106-PG or 206-PG main valve. The solenoid pilot valve provides on-off position operation. The solenoid either admits inlet pressure into the main valve operating chamber or releases pressure from the operating chamber. The pilot system is usually piped to discharge at the valve outlet, but can be piped to ...
Manufactured by:Singer, a Mueller Brand based inKimball, TENNESSEE (USA)
The SAP surge anticipator panel provides the interface between a customer supplied, system pressure switch and the Singer surge anticipating control valve. Together they provide protection against destructive pressure surges. The SAP panel energizes the control valve pilot solenoid on an abnormally low pressure reading and/or power failure to pumps. The 12 VDC pilot solenoid is energized to open ...