Refine by
Xprt Equipment Supplied In Guinea
67 equipment items found
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
Agricultural biogas plants utilise organic materials found on farms to generate biogas, a renewable fuel source and in turn renewable power through cogeneration / combined heat and power. The plant may be designed to accept energy crops that have been grown specifically to input into the digestion facility or agricultural wastes. These crops are typically ensilaged and stored in clamps or hoppers ...
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
Demand for distributed power is growing at a fast pace. Distributed Power solutions furnish power right where you are, with fewer channelling and distribution losses. The 616 Genset goes where you need it – on or off the grid, in remote locations, and even under the most demanding operating conditions, providing you with reliable power at lower fuel cost, extended equipment life and smaller ...
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
Based on the proven design concepts of Type-3 and Type-6, the modern Type-4 engines in the 800-1,500kWe power range are characterised by a high power density and outstanding efficiency. The optimised control and monitoring provides easy preventative maintenance and maximum reliability and ...
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
Clarke Energy recognised the requirements for a ‘power module’ based around the GE Jenbacher Type-6 engine. The power module scope which comprises of engine, enclosure, silencer cooling system and other key ancillary components has been optimised for the requirements of the Australian coal gas and remote power ...
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
Hot and tropical counties can pose challenges for the operation of the generator. If the generator exceeds certain temperature limits de-rating will occur. In order to overcome the challenge of high ambient temperatures the generator enclosure or container must be correctly engineered to ensure that the generator is adequately cooled. In addition to incorporation of enhanced ventilation systems ...
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
A GE Jenbacher gas engine module is configured for the recovery of both electricity and heat via a cogeneration / CHP configuration. As with the genset, the gas engine is linked to the alternator which produces electrical power for export. The cooling water circuits of the engine are first linked to a plate heat exchanger which facilitates the transfer of hot water to an external hot water ...
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
A fuel gas dehumidifier or gas drier is an ancillary system to a gas engine that is used to remove moisture from the fuel gas for the cogeneration system (dessication). The removal of water from the fuel gas helps to optimise the combustion process in the engine, prevents condensation and helps protect the engine from the ...
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
A carbon filter is an in-line container filled with activated carbon granules. Carbon filters are used for the removal of contaminants for the fuel gas to gas engines. Activated carbon has a high propensity for the adsorption of fuel gas contaminants. Carbon filters are often a necessity for tricky gases such as landfill gas, which often contain large amounts of contaminants. The carbon needs to ...
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
When methane is used as a fuel in a gas engine it is burnt and converted to carbon dioxide and other trace elements. This carbon dioxide is released as a hot gas in the CHP plant ...
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
Along with the supply of a GE Jenbacher cogeneration plant, Clarke Energy can provide exhaust gas catalysts for the scrubbing of exhaust gases. Exhaust gas purification systems are able to reduce harmful exhaust gases by up to 95%. The exhaust gas purification system can consists of up to three consecutive stages, depending on the requirements of the application, to purify the exhaust gases: The ...
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
Exhaust gas heat exchangers (EGHE) utilise waste heat from the exhaust of the GE's Jenbacher gas engine cogeneration plant. They are typically located adjacent to the engine or are mounted on the roof of a containerised combined heat and power unit. They are present in a wide range of different applications and along with the other systems can be used to achieve overall system efficiencies of ...
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
Approximately 25% of the usable energy of the fuel gas is released in the exhaust of the gas engine. This can be captured for cogeneration in a combined heat and power plant. This heat exits the engine at ~450oC as ‘high grade heat’, contrasting to ‘low-grade heat’ available from the generator cooling circuits. This high temperature and flow makes it well suited for ...
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
DIA.NE is a user-friendly engine management system. A colour graphic display provides a clear overview of all information. This diagnostic instrument features an effective alarm management system with all error messages date stamped and clearly presented in tabular form to identify the sequence of ...
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
LEANOX is a lean-mixture combustion control. It was developed by GE's Jenbacher and has been patented worldwide. The system ensures the correct air to gas ratio under all operating conditions. This has the benefit of minimising exhaust gas emissions whilst maintaining stable engine ...
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
Gas engines are highly efficient at providing the stimulus for the growth of plants, whilst in parallel providing a flexible supply of electrical power. Heat, light and carbon dioxide (CO2) all promote plant growth. Gas engines provide electrical power at the alternator and when in a cogeneration configuration can also recover useful heat. Carbon dioxide is released in the exhaust gases of the ...
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
Disposal and treatment of biological waste represent a major challenge for the waste industry. For a wide range of organic substances from agriculture, foodstuff of feed industries, anaerobic fermentation is a superior alternative to composting. Biogas – a mixture of methane and carbon dioxide – is created during anaerobic digestion and serves as a high-energy renewable fuel that can ...
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
Landfill gas is created during the anaerobic decomposition of organic substances in municipal solid waste (MSW) and commercial and industrial (C&I) wastes. Depending upon the landfill design and its management, as well as waste composition, compaction, moisture and several other factors, thousands of landfills are available worldwide to collect and utilise this valuable renewable energy ...
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
Wastewater professionals once accepted the high costs of operating wastewater treatment facilities as a consequence of meeting their discharge permit requirements. As the cost of energy rises and emphasis on renewable energy increases, local authorities and municipalities are seeking solutions that save money and meet renewable requirements. GE Energy’s Jenbacher gas engines provide a ...
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
Abandoned mine methane (AMM) can be recovered from disused coal mines. Abandoned mine methane (AMM) projects produce energy (thermal and electrical) with the added bonus of reducing atmospheric emissions of methane. Methane is a potent greenhouse gas and huge amounts of methane will escape from the mine for years to come following closure. Sealed abandoned mines offer an excellent opportunity for ...
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
Coal Seam Methane (CSM) or Coal Bed Methane (CBM) is primary coal seam gas collected from unmined coal seams. These coal seams are drilled down into, releasing the associated gas which is extracted and can be used to generate electricity. CSM consists of over 90% methane and can be harvested independently of coal mining in some locations. The gas composition is normally stable, meaning that the ...