Refine by
Applications
- Level Sensors Simplify Inventory for Food Processors
- Channel Networks solutions for Seepage Water
- Solutions for Real-Time Bulk Material Inventory for Cement
- Channel networks solutions for replacement of measurement with inverted syphon sector
- Solutions for Bioenergy
- Solutions for Mining Industry
- Channel Networks - Fix Installation Measurements for hybrid flow measurement in main collector sector
- Solutions for Precision Plastic Resin Inventory for Silos
- Solutions for Digitize Agriculture Inventory
- Channel Networks - Fix Installation Measurements for no shutting down the flow areas
- Particle Measurement Instruments for Non-Exhaust Vehicle Emissions
- Channel Networks - Fix Installation Measurements for Flow Measurement In Pipe That Could Not Be Shut Down
- Dedusting Filter Elements for the Pharmaceutical Industry
- Dedusting Filter Elements for the Food Industry
- Filter Elements for Additive Manufacturing
- Filter Elements for Chemistry & Pharmacy
- Filter Elements for Metal Working & Processing
- Filter Elements for Plastics Industry
- Filter Elements for Containment Industry
- Filter Elements for Pigment Manufacturing & Processing
- Filter Elements for Pigment Manufacturing & Processing
- Filter Elements for Surface Technology
- Filter Elements for Mining Industry
- Filter Elements for Air Purifier, Virus Sterilizer
- Filter Elements for Wood Working & Processing
- Multiprobes for Surface Water
- Multiprobes for Harmful Algal Bloom
- Multiprobes for Coastal
- Multiprobes for Stormwater
- Multiprobes for Aquaculture
- Multiprobes for Sourcewater
- Multiprobes for Groundwater
- Multiprobes for Dye Tracing
- Multiprobes for Dredging
- Multiprobes for Multiprobes for Dredging
- Multiprobes for Wastewater
- Multiprobes for Oil & Gas
- Multiprobes for Early Warning
- Pleated Filter Elements for Dust Removal and Air Filtration
- Heat Exchangers Solutions for Evaporation & Concentration of Environmental Waste Streams Sector
- Heat Exchangers Solutions for Pasteurisation of Sludge Sector
- Heat Exchangers Solutions for Sewage Treatment Industry
- Heat Exchangers Solutions for for Waste Water Industry
- Industrial Valves for Power Plants
- Industrial Valves for Chemical Plants
- Industrial Valves for Textile
- Industrial Valves for Process
- Industrial Valves for Pharma
- Industrial Valves for Marine
- Industrial Valves for Pulp & Paper
- Industrial Valves for Oil & Gas
- Industrial Valves for Petrochemical
- Water Pollution Control and Recovery Equipment for Pre-Treatment Solutions
- Water Pollution Control and Recovery Equipment for Oily Water Treatment
- Heat Exchangers Solutions for Palm Oil Sector
- Heat Exchangers Solutions for Anaerobic Digestion (AD) and Biogas Industry
- Heat Exchangers Solutions for Vegetable Oils Industry
- Water Pollution Control and Recovery Equipment for Chemical Spills
- Soil sampling and drilling solutions for agriculture industry
- High Performance Preparation Technology for Dry Mortar and Plaster
- Mixing and Grinding Technology for Sand Lime Brick
- Preparation Technology for the Ceramic Industry
- Cutting-Edge Technologies for Refractory Compounds
- Mixing and Grinding Technology for Preparation of Glass Batches
- Mixing and Grinding Technology for Lead Acid Paste
- Trailblazing Process Technology for Lithium-Ion Batteries
- Preparation Technology for Friction Lining Compounds
- Mixing and Grinding Technology for Foundry Sand
- Preparation Technologies for Metallurgy
- Mixing and Grinding Technology for Environmental
- Eirich System Solutions for Fertilizer
- Monitors, gas analyzers solutions for ISO 14644-1/2: 2015 insights & solutions
- Geosynthetic Material for Ground Engineering
- Geosynthetic Material for Hydro
- Geosynthetic Material for Ports and Aviation
Xprt Equipment Supplied In India
40,279 equipment items found
Showcase
Manufactured by:LNI Swissgas based inVersoix, SWITZERLAND
POLLUCE is designed to satisfy the needs of all LCMS brand on the market. It makes use of Pressure Swing Adsorption technology (PSA), through the use of specific selected molecular sieves (CMS), enable to obtain extremely pure nitrogen, this technologies reduced risk of gas contamination and ...
Showcase
Manufactured by:Acme Engineering Prod. Ltd. based inMount-Royal, QUEBEC (CANADA)
ACME ENGINEERING PRODUCTS offers hot water boilers based on proven design for building complexes, commercial structures, and light industry. This boiler can be connected directly on the high voltage power distribution ...
Showcase
Manufactured by:Komax AG based inDierikon, SWITZERLAND
The Zeta 630 increases productivity in control cabinet construction with two process modules from batch size 1 and with up to 36 different wires in the wire changer. The wide variability of control cabinet construction requires many materials such as wire types, terminals or ferrules. The Zeta 630 allows just-in-time processing in batch or sequence production of various wires for cabinet building ...
Showcase
Manufactured by:Sierra Instruments, Inc. based inMonterey, CALIFORNIA (USA)
Sierra was the first to introduce multivariable mass vortex flow meters to the market in the late 1990s with the InnovaMass "S-Series" product line--the 240S and 241S. The InnovaMass 240S inline version is a true workhorse in applications ranging from large pipes and ducts, to high pressure and saturated or superheated steam. The InnovaMass 241S is manufactured as a volumetric only version or a ...
Showcase
Manufactured by:Anguil Environmental Systems, Inc. based inMilwaukee, WISCONSIN (USA)
Anguil has decades of experience supplying alternative heating methods for oxidizer technologies. While the electrically heated Catalytic Recuperative Oxidizer (CATOX) is well established and widely applied, the industry has been slower to integrate lower carbon components like electric heating elements and hydrogen-fueled burners into the Regenerative Thermal Oxidizer (RTO), Direct Fired Thermal ...
Showcase
Manufactured by:Weda Robotics based inSödertälje, SWEDEN
YT-600 is a remote controlled vehicle for sediment (sludge) removal in all sorts of reservoirs'. The powerful on-board submersible pump and wide nozzle allows for efficient cleaning of large bottom surfaces. The sediment is pumped through a hose to a seleceted discharge point or to a filter. Traditional cleaning after draining and then removal of the sediment requires the reservoir to be taken ...
Showcase
Manufactured by:BUCHI based inFlawil, SWITZERLAND
Pre-incineration unit for ash determination. The Wet Digester B-440 is an ecological pre-incineration unit for ash determination in different sample types. Select from a wide temperature range of up to 600 °C for more flexibility. Improve reproducibility with programmable incineration ...
Showcase
Manufactured by:Analytik Jena - Lab-loving people based inJena, GERMANY
Quality is the difference: Unique application diversity (TS, TC, TX, TOC, TIC, EC, AOC). Low maintenance and low operating costs. Fully automated solids sampler with high sample ...
Showcase
Manufactured by:Myron L Company based inCarlsbad, CALIFORNIA (USA)
Myron L Company’s new 900 Series Multi-Parameter Monitor / Controllers combine Accuracy, Reliability, Simplicity, and Flexibility. The user intuitive GUI (Graphical User Interface) allows easy and complete programmability of the instrument all from the LCD touch screen. These highly accurate instruments have the ability for simultaneous monitoring and controlling of multiple ...
Showcase
Manufactured by:LNI Swissgas based inVersoix, SWITZERLAND
H2 POWER 10L is a system able to provide up to 1Nm3/h of hydrogen. The hydrogen is produced from three Hydrogen Generators “6920.16.330” connected in parallel mode. 6920.16.330 uses an electrolytic cell with polymeric membrane (PEM) to produce pure hydrogen from distilled water. No acid or alkaline solutions are used. It is provided with an internal 1.1 litres tank with electronic ...
Showcase
Manufactured by:ENVEA based inPoissy, FRANCE
CAI PAS Sense analyzers use photoacoustic infrared technology to measure many of the most commonly measured IR-absorbing gases. Gas selectivity is achieved through the use of optical filters that provide both a means of detecting the gas of interest and compensating for interfering gases and water. Both bench-top and rack-mounted PAS configurations are ...
Showcase
Manufactured by:Myron L Company based inCarlsbad, CALIFORNIA (USA)
We are proud of the trust our handheld water quality instruments and monitor/controllers have earned in the past. Our product line has evolved to a new level of outstanding performance and value in analytical instruments: the Ultrameter II series. While priced like affordable single-parameter instruments, the Ultrameter II does the job of up to seven ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
Meet the R-80, our most energy-efficient Rotavapor® to date and the most compact Rotavapor® on the market. The R-80 is an affordable and eco-friendly solution that ensures the most efficient use of lab space while meeting BUCHI’s high-quality standards. ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
Beaker flask 100 ml with rubber cap for direct connection to manifold valves including filter paper (75 μm, 100 pcs.) and O-ring (2 ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
PrepPure HPLC columns are filled with high quality silica and enable the performance of high resolution separations. Easy scalability from 4.6 – 70 mm ID and phases for standard and targeted applications make PrepPure the obvious choice for best ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
The Vacuum Pump V-80 / V-180 is a chemically resistant and affordable vacuum source with a compact design. The speed-control solution guarantees the vacuum pump operates quietly and without ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
The preparative version of the Sepmatix 8x HPLC system has an HPLC pump that is equipped with a 100 ml pump head, the max. operating pressure is 400 bar. Flow rates per channel 3.0 to 8.0 ml/ min. For parallel collection of fractions from all 8 channels, the system is additionally equipped with 8 fraction collectors, which are combined in a compact collector module. In the standard version the ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
The UniversalExtractor E-800 is powerful and perfect for demanding extraction tasks. Distinct extraction positions enable individual process control and simultaneous operation of 6 different extraction methods with high speed and ...
Premium
Manufactured by:LNI Swissgas based inVersoix, SWITZERLAND
The NitroGen series CASTORE PRO HP are Membrane Nitrogen Generators. They are engineered to transform standard compressed air into a safe, regulated supply of Nitrogen with a purity greater than 99.5%. The exclusive electronic flow control allows to generate Nitrogen with a higher purity using a smaller volume of air which results in reduced energy costs and maintenance of any external ...
Premium
Manufactured by:Anguil Environmental Systems, Inc. based inMilwaukee, WISCONSIN (USA)
Every energy demand is unique, as is every energy-efficiency improvement opportunity. At Anguil, our track record includes an ability to blend time-tested, standard products with innovative, custom engineered solutions. We design, manufacture, and install energy recovery systems that decrease your energy consumption, reduce operating costs and maximize return on ...