Show results for
Refine by
Accelerometer Equipment Supplied In Indonesia
27 equipment items found
Manufactured by:Larson Davis, a division of PCB Piezotronics based inDepew, NEW YORK (USA)
Larson Davis offers a selected range of measurement accelerometers optimized for use with the HVM200 Human Vibration Monitor. They cover the complete range of applications including Hand-arm, Whole-body, and Glove Transmissibility ...
Manufactured by:GeoSIG Ltd based inSchlieren, SWITZERLAND
The AC-73 sensor package is a true electro-mechanical triaxial downhole accelerometer designed for broadband earthquake monitoring and applications requiring highly sensitive and rugged sensors with minimum maintenance and a simple method for periodic ...
Manufactured by:GeoSIG Ltd based inSchlieren, SWITZERLAND
The AC-73-DH sensor package is a true electro-mechanical triaxial downhole accelerometer designed for broadband earthquake monitoring and applications requiring highly sensitive and rugged sensors with minimum maintenance and a simple method for periodic testing. The rugged mass suspension moving coil system improves the signal to noise ratio. The magnetic system and capacitive ...
Manufactured by:GeoSIG Ltd based inSchlieren, SWITZERLAND
The AC-43 sensor package is a triaxial accelerometer designed for urban and industrial applications regarding strong motion earthquake survey and vibration monitoring as well as alarm and switch systems. All these applications require rugged sensors with minimum maintenance and a simple method for periodic ...
Manufactured by:GeoSIG Ltd based inSchlieren, SWITZERLAND
The AC-23 package is a triaxial accelerometer sensor designed for Strong Motion and industrial applications where a high sensitivity is required. The AC-2x series are state-of-the-art servo-accelerometers based on standard exploration geophone mass-spring system with electronic feedback. ...
Manufactured by:Geobit Instruments based inPatras, GREECE
GEObit introduces GEO-A200 high resolution and high dynamic range compact digital accelerograph. The size of the instrument is only 139mm heigh and 138mm diameter. The power consumption is less than 2W. Available sampling rate is 1 to 1000sps and optional lower sampling rates are supported. Built-in GNSS receiver combined with ultra accurate DPLL unit providing time drift 10e-9sec ensures timing ...
by:SHAMA Technologies (S) Pte Ltd. based inSingapore, SINGAPORE
DC accelerometer based inclinometers with 360 degree range (single axis) or +/- 45 degrees (dual axis). Analog outputs are scaled to exact physical ...
Manufactured by:Aeron Systems Private Limited based inPune, INDIA
The device measures magnetic heading with high accuracy, and is suitable for land and marine applications. DMC300 comprises triaxial solid state MEMS accelerometer and magnetometer sensors. Accelerometer is used to measure the roll and pitch in near-static conditions and magnetometer is used for estimation of heading. The roll and pitch measurements are used for ...
Manufactured by:Aeron Systems Private Limited based inPune, INDIA
The Castor series IMU1640 is a high-end tactical class inertial measurement unit consisting of high-performance triaxial MEMS Accelerometer, triaxial Gyroscope and triaxial Magnetometer sensors based on latest MEMS technology. The IMU is equipped with a high-speed processor that runs superior signal processing algorithms delivering control grade inertial measurement data. ...
Manufactured by:Aeron Systems Private Limited based inPune, INDIA
It can measure inclination angles both (X and Y) axes with ±90 ° measurement in X axis and ±60 ° in Y axis. INC2D determines inclination by measurement of gravity vector using triaxial MEMS accelerometer. These in conjunction with the filtering techniques give accuracy of ±0.3 ° (1σ) with a resolution of 0.01 °. ...
Manufactured by:Aeron Systems Private Limited based inPune, INDIA
The system runs Aeron’s proprietary Kalman filter based parameter estimation engine offering near tactical performance providing superior estimates of navigation parameters including position, velocities, attitude and heading. Pollux 2 features tri-axial MEMS solid state accelerometers, tri-axial gyroscopes, barometer for altitude measurement and magnetometer for heading ...
Manufactured by:Aeron Systems Private Limited based inPune, INDIA
The system runs Aeron’s proprietary Kalman filter based parameter estimation engine offering near tactical performance providing superior estimates of navigation parameters including position, velocities, attitude and heading. Pollux 2 features tri-axial MEMS solid state accelerometers, tri-axial gyroscopes, barometer for altitude measurement and magnetometer for heading ...
Manufactured by:Larson Davis, a division of PCB Piezotronics based inDepew, NEW YORK (USA)
Provides microphone polarization voltage, adjustable gain and filtering (A-weight, C-weight, or band-pass). Can also be used with ICP and charge-coupled accelerometers with the appropriate accessories. Automated sequential multi-channel sound and vibration measurements using a single or dual channel analyzer under PC control via RS232 interface. One example is the measurement of ...
Premium
Manufactured by:Casella based inKempston, UNITED KINGDOM
Make all the measurements necessary for Hand Arm Vibration risk assessments. Casella's Tri-Axial Hand Arm Vibration Meter has been specifically designed for Hand Arm Vibration Exposure ...
Manufactured by:Larson Davis, a division of PCB Piezotronics based inDepew, NEW YORK (USA)
The HVM200 is a small rugged vibration meter with built in Wi-Fi that can be used to measure hand-arm, whole body and general vibration. It includes the metrics and frequency weightings needed to measure human vibration. This 3 channel meter meets the requirements of ISO 8041:2005 and it is designed to measure per ISO 2631-1, 2 & 5 and ISO 5349 in support of the American Conference of ...
Manufactured by:Endress+Hauser Group Services AG based inReinach, SWITZERLAND
Mobile Plant Asset Management simplifies and optimizes commissioning and maintenance workflows. Field Xpert is an industrial PDA with integrated touchscreen for commissioning and maintaining field devices in explosion hazardous and safe areas*. It allows efficient configuration of FOUNDATION fieldbus, HART 5/6/7 and WirelessHART devices via Bluetooth and/or Wifi interfaces. From an application ...
Manufactured by:GeoSIG Ltd based inSchlieren, SWITZERLAND
GeoSIG Digital Sensor System has been developed to accommodate the requirements for a cost effective and practical installation in circumstances where several measuring points need to be deployed over long distances. The system consists of GMSplusD recorder and AC-7xD or AC-4xD digital accelerometers, with the option of adding analogue sensors. Each digital ...
Manufactured by:GeoSIG Ltd based inSchlieren, SWITZERLAND
albris is a compact, full-featured digital accelerograph. Well-established performances of our true electro-mechanical force balance accelerometer AC-7x series and our low noise powerful recorder GMS series are now merged together as a state-of-the-art instrument. Highly optimised cost of ownership and user-friendly design make the albris the perfect choice for any ...
Manufactured by:Royal Eijkelkamp based inGiesbeek, NETHERLANDS
Seismic CPT is performed by pausing at regular intervals throughout the CPT and generating seismic waveforms at the surface. These waveforms are detected by a seismic module behind the CPT cone. The seismic module houses a tri-axial accelerometer that can be used with either a 10 cm2 or a 15 cm2 cone to perform seismic cone penetration ...
Manufactured by:GeoSIG Ltd based inSchlieren, SWITZERLAND
STS is a state-of-the-art seismic switch / trip system packaged as a 19’’ rack module consisting of Slot-in Modules (SiMs) inserted into vertical slots with a remote accelerometer connected to it. It provides a set of highly reliable alarm contacts as outputs activated by exceedance of acceleration and/or based on state of health. The STS combines the best of the ...