Refine by
Sequential Sampling Equipment Supplied In Italy
26 equipment items found
Manufactured by:TCR-Tecora based inCogliate (MB), ITALY
The Sentinel PM module combined with the atmospherical sampler Charlie, allows the automated and sequential collections of the atmospherical particulate matters on 47 mm diameter filtering membranes, which are contained in appropriate filterholder cassette. The 16 filter capacity and the particular realization of a removable system, permit the filter recovering and replacing ...
Manufactured by:Aquaria Srl based inLacchiarella (MI), ITALY
The sampler CF20 SQ offers the possibility to carry out a sequential sampling on 16 channels, each of which programmable indifferently in low or high flows. This possibility allows the operator to sample dust and gas in a single ...
Manufactured by:Dado Lab SRL based inCinisello Balsamo, ITALY
The PMx sequential samplers Mod. Giano and Gemini were designed and realized by Dado lab to be more practical, easier to transport and with user friendly interface compared to other available solutions. The common heart to both models is the multi-purpose core unit (MPC) which manages the sequential sampling on a single or double ...
Premium
Manufactured by:ENVEA based inPoissy, FRANCE
Designed to automatically sample particulates on filters using a TSP, PM10, PM2.5 or PM1 inlet. PM162M is a sequential automatic sampling device for particulate matter in the ambient air. The particles are sampled at constant flow rate (1 m3/h or 2.3 m3/h) and collected on filters for gravimetric weighing and possible ...
Manufactured by:TCR-Tecora based inCogliate (MB), ITALY
ECHO PM is a "stand alone" instrument projected also for outdoor operation in harsh climatic conditions. The wide regulation range and the accurate electronic flow sampling control at either actual or standard conditions, makes ECHO PM in accordance with the reference methods EN 12341 for PM 10 with head LVS PM10 2.3 m3/h, and US EPA 40 CFR part 50 for PM10 and PM2.5 at 1m3/h. ...
Manufactured by:AMS Analitica based inPesaro, ITALY
The sampling sequential system is the reply to continuous requests for an easier to use tool without any locating and installation issue. The system concerns a derivate in anodized aluminum reducing dust passage friction to the minimum guarantying maximum sampling ...
Premium
Manufactured by:Metrohm AG based inHerisau, SWITZERLAND
The Professional IC Vario system with Metrohm's intelligent inline sample preconcentration, sequential suppression, and conductivity detection enables fully automatic determination of anions or cations in solutions with low ion ...
Manufactured by:Dado Lab SRL based inCinisello Balsamo, ITALY
Giano BC1 is a sequential sampler with Black Carbon analyzer in real time directly on the sampling filter. Born from the collaboration between PM_Ten, a spin-off of the University of Genoa that followed the design, and Dado lab, which engineered and implemented the system in its sequential sampler, Giano BC1 is the first PMx ...
Premium
Manufactured by:Metrohm AG based inHerisau, SWITZERLAND
The Professional IC Vario system with Metrohm's intelligent inline sample preconcentration, sequential suppression and conductivity detection enables fully automatic determination of anions and cations in solutions with low ion ...
Manufactured by:Aquaria Srl based inLacchiarella (MI), ITALY
Both the European Union (EU, 1996) that the Ministry of Environment (DM 25/11/94), have highlighted the importance of continuous monitoring of exposure to physical finer aerosol or with an aerodynamic diameter less than 10 ìm (thoracic fraction or PM 10). These particles are indeed responsible for significant adverse health effects affecting the respiratory system.The Air Sequential ...
Manufactured by:Fai Instruments s.r.l based inFonte Nouva, ITALY
SILENT Sequential Air Sampler is a sequential instrument specifically developed for particulate matter collection in indoor environment. To assure extended unattended sampling periods, up to 4 inlets (each one carrying one membrane filter) can be installed in the sequential unit and programmed for cycles in the desired ...
Manufactured by:HTA s.r.l. based inBrescia (BS), ITALY
Designed to satisfy the most demanding needs of robustness and ease of use, the 2000H is the ideal solution for headspace injection in GC and GC-MS ...
Manufactured by:Aquaria Srl based inLacchiarella (MI), ITALY
MICROFLOW alfa has been developed for bio-aerosol sampling in critical places (e.g. clean rooms, food plants, fermentation’s plants etc….). Microflow alfa allows to verify and quantify microorganism presence. In this way you can value the exposure or you can identify the source in order to put in place corrective ...
Manufactured by:AMS Analitica based inPesaro, ITALY
The system has a 12 sorbent tubes supports, available for different tubes sizes and the flow range, allow the user to choice the applications with standard sorbent tubes (chemical desorption) and thermal desorption tubes in the 6,4x89 mm standard dimensions. A special option is dedicated to Formaldehyde DNPH sampling procedure, with the inlet and sampling line based with a inner copper tube, to ...
Premium
Manufactured by:Umwelttechnik MCZ GmbH based inBad Nauheim, GERMANY
Control system for the automated collection of gases and particles on adsorption tubes, wash-bottles, or filters. Application areas include emission/immission measurements, TLV value monitoring, landfill gas ...
Manufactured by:AMS Analitica based inPesaro, ITALY
The AirCube HE sampler is able to satisfy the requirements foreseen by the EN-12341 and EN-14907 norms for PM10 and PM2.5 aerial-dispersed particles sampling, under the flow conditions foreseen of 38 liters per minute and is able of carrying out emissions samples both in the manual and in automatic mode thanks to the possibility of connection with the isokinetic parameter meter IsoFlow ...
Premium
Manufactured by:Metrohm AG based inHerisau, SWITZERLAND
Fully integrated solution for water content determination with volumetric Karl Fischer titration. OMNIS KF Titration is the high-end volumetric Karl Fischer titrator based on the modular OMNIS platform. With OMNIS KF Titration, determining water in samples has never been more convenient, safer, and ...
Manufactured by:AMS Analitica based inPesaro, ITALY
The era of samplings with long interminable settings can be considered over with the new AirCube COM2 TH portable sampler. With just a few operations in the user-friendly preparation menu the sampler is immediately ready for a new sampling process. ...
Manufactured by:AMS Analitica based inPesaro, ITALY
The high-volume sampler considered as “reference sampler” is the same used in EPA directive (see section 40 Part 50.11) for the same application. With regard to medium-volume samplers, the recommended impactor is - in this case as well - the one directly referred to in section A of the above mentioned EPA directive (Annex A). These PM10 and PM2,5 impactors obtained the certification ...
Manufactured by:TCR-Tecora based inCogliate (MB), ITALY
Bravo DUO is a constant flow sampler with 2 diaphragm pumps and double heads! The heart of BRAVO DUO consists of two diaphragm pumps resistant to aggressive gases. Flow control is assured by a microprocessor ...