Show results for
Refine by
Stack Analyzer Equipment Supplied In Italy
19 equipment items found
Manufactured by:Cerex Monitoring Solutions, LLC. based inAtlanta, GEORGIA (US) (USA)
Point UV-DOAS multi-gas analyzer equipped with a sampling probe to perform in-situ process and chimney measurements when shorter path lengths and/or particulate filtering are required. Typically for CEM, DeSOx, DeNOx. ...
Manufactured by:Cerex Monitoring Solutions, LLC. based inAtlanta, GEORGIA (US) (USA)
Complete insitu solution to monitor critical stack emissions such as Ammonia (NH3), BTEX, Nitrogen Oxides (NOx), and more. Eliminates equipment and maintenance associated with extracting sample from ...
Manufactured by:PCF Elettronica S.r.l. based inLevate (BG), ITALY
For continuous source and/or environment monitoring, including discrete sampling. The detector is an heated carbon atom counter. Sample is introduced into a micro flame lighted by hydrogen and air (1:10 ratio), where the electrical charges generated by the oxidation of Cx to CO are proportional to the hydrocarbon content in the sample. Actual car-bon concentration is computed out of calibra-tion ...
Manufactured by:PCF Elettronica S.r.l. based inLevate (BG), ITALY
Mod. 110H, stationary hot F.I.D. (Flame Ionization Detector) VOC monitor. Meets UNI EN 13526 and UNI EN 12619 requirements and specifications. Fast response monitor for continuous source monitoring. ...
Manufactured by:PCF Elettronica S.r.l. based inLevate (BG), ITALY
Special versions of the base Mod. 529 allow to meet the specific requirements of monitoring and control. The specific analysis of the chemical components increase the efficiency of industrial plant and avoids undesired pollution conditions. Gas chromatographic separation of Benzene fraction from the Total Hydrocarbons with direct measurement. For stack and environment continuous monitoring. It ...
Manufactured by:Cerex Monitoring Solutions, LLC. based inAtlanta, GEORGIA (US) (USA)
The Cerex FT5000C and FT5000CRM are multi-gas FTIR analyzers suitable for continuous emissions monitoring, process monitoring, RATA, Quad J and Quad Z compliance monitoring, and ambient air monitoring ...
Manufactured by:Cerex Monitoring Solutions, LLC. based inAtlanta, GEORGIA (US) (USA)
Insitu Stack and Process FTIR Analyzer: Weight 150 lbs (68kg). Measurements 24.5″ x 18.5″ x 10″ (62cm x 47cm x 25.4cm). Enclosure 4X – IP54, thermoelectrically cooled. Power 4A/2A @ 110/220 VAC. Operating Temperature -20°F – 104°F (-29°C – 40°C). ...
Manufactured by:HORIBA Europe GmbH based inLeichlingen, GERMANY
HORIBA Europe’s NOx Converter Checker CC-100E has been developed to test the e'ciency of NOx to NO converters, which are used in NOx gas analyzers for stack emission measurements or process gas ...
Manufactured by:Pollution S.r.l. based inBudrio (Bologna), ITALY
Polaris FID SE is an on-site FID analyzer for the detection of total organic carbon (TOC) in compliance with EN12619:2013 and EPA Method 25A. It is a fully portable instrument because it incorporates everything needed for the analysis; for that reason, it is also useful for environmental screening. Polaris FID SE is Smart thanks to Bluetooth connection and the designed APP to view real time data ...
Manufactured by:PCF Elettronica S.r.l. based inLevate (BG), ITALY
Meets UNI EN 14181 and ISO 9169:2005 requirements and specifications. Mod. D/P99, Performance Tester.Available in the stationary and portable ...
Manufactured by:New Instruments and Research for Analysis (NIRA) S.r.l. based inBiassono (MB), ITALY
Mercury 903, portable VOC analyser for the analysis of VOC compounds expressed as total organic carbon in stack and flues. This analyser is supplied with an optional integrated kit, to selectively analyse methane or methane +VOC. ...
Manufactured by:HORIBA Europe GmbH based inLeichlingen, GERMANY
Laboratory-precise five components gas analysis, anywhere according to DIN EN 15267 - 3, DIN EN 14181. Approved as Standard Reference Method (SRM) for: CO (DIN EN 15058). O2 (DIN EN 14789). NOx (DIN EN ...
Manufactured by:Cerex Monitoring Solutions, LLC. based inAtlanta, GEORGIA (US) (USA)
.UV-FTIR (In-Situ): Dual Channel FTIR and UV-DOAS Continuous Emissions Monitoring. All criteria gases with one analyzer. Cross stack and parallel cell models. Insitu stack monitoring, non contact. Outdoor model ...
Manufactured by:AMETEK Process Instruments based inPittsburgh, PENNSYLVANIA (USA)
Using proven ultraviolet (UV) technology, the 930 identifies potential safety risks in sulfur storage locations through simultaneous hydrogen sulfide (H2S) and sulfur dioxide (SO2) measurements. Capable of stable, sensitive measurements ranging from parts-per-million (ppm) to percentage levels, the analyzer offers output alarms for the lower explosive limit of H2S and smoldering fire level of ...
Manufactured by:Thermo Scientific - Air Quality Instruments based inFranklin, MASSACHUSETTS (USA)
Diluting Stack Probe Model EPM.300 Series performs four critical functions to prepare a sample from the stack (sample delivery, course filtering, fine filtering, and sample dilution).Dilution Probes are proven performers with low maintenance requirements in the field and a long life on the stack.The system uses an air driven aspirator which extracts the sample from the stack. It is then passed ...
Manufactured by:Protea Limited based inMiddlewich, UNITED KINGDOM
Protea 5000 In-Situ full spectrum Ultra Violet gas analyser connected to a Protea Control Unit forms the basis of a Continuous Emission Monitoring System (CEMS). The Stack Mounted In-Situ analyser monitors the stack gas without the need for any sample handling equipment making it a cost effective solution to Continuous Emission Monitoring and Process applications. The analyser monitors the stack ...
Manufactured by:Protea Limited based inMiddlewich, UNITED KINGDOM
Protea 2000 In-Situ Infra-red gas analyser connected to a Protea Control Unit forms the basis of a Continuous Emission Monitoring System (CEMS). The Stack Mounted In-Situ analyser monitors the stack gas without the need for any sample handling equipment making it a cost effective solution to Continuous Emission Monitoring and Process applications. The analyser monitors the stack gases ...
Manufactured by:Cerex Monitoring Solutions, LLC. based inAtlanta, GEORGIA (US) (USA)
Designed to provide high performance analysis for a variety of applications such as Process, Ambient, and Continuous Emission Monitoring in a rack mount ...
Manufactured by:Cerex Monitoring Solutions, LLC. based inAtlanta, GEORGIA (US) (USA)
Designed to provide multi-zone monitoring of critical gases, such as Benzene (C6H6) Butadiene (C4H6), Hydrogen Sulfide (H2S) within a single ...