Refine by
Applications
- Channel Networks solutions for Seepage Water
- Channel networks solutions for replacement of measurement with inverted syphon sector
- Channel Networks - Fix Installation Measurements for hybrid flow measurement in main collector sector
- Channel Networks - Fix Installation Measurements for no shutting down the flow areas
- Channel Networks - Fix Installation Measurements for Flow Measurement In Pipe That Could Not Be Shut Down
- Pumps and Dredging Systems for Dredging
- Pumps and Dredging Systems for Industrial Dredging
- Pumps and Dredging Systems for Mining Dredging
- Pumps and Dredging Systems for Offshore dredging
- Multiprobes for Surface Water
- Multiprobes for Harmful Algal Bloom
- Multiprobes for Coastal
- Multiprobes for Stormwater
- Multiprobes for Aquaculture
- Multiprobes for Sourcewater
- Multiprobes for Groundwater
- Multiprobes for Dye Tracing
- Multiprobes for Dredging
- Multiprobes for Multiprobes for Dredging
- Multiprobes for Wastewater
- Multiprobes for Oil & Gas
- Multiprobes for Early Warning
- Solutions for waste water treatment
- Solutions for Industry
- Filter solution for chlorine production - wet chlorine sector
- Filter solution for chlorine production - dry chlorine sector
- Filter solution for chlorine production - hydrogen stream sector
- Filter solution for NaOH stream duty sector
- Filter solution for phosphoric acid industry sector
- Filter for Gas Cleaning - Indirectly Heated Oven Fume Filtration System
- Heat transfer products solutions for the industrial process sector
- Stack Emission Sampling for Emission Dust Sampling Options
- Stack Emission Sampling for Heavy Metal Sampling System
- Stack Emission Sampling for Mercury Sampling System
- Stack Emission Sampling for Hydrochloride Acid Chimney Sampling
- Stack Emission Sampling for Dioxin Sampling
- Automatic Hydraulic Valves and Water Control Systems for Waterworks Sector
- Air Pollution Measurements for Education
- Gas Analysers and Sampling System for Combustion Control & Flue Gas
- Gas Analysers and Sampling System for Power Plants
- Heat transfer products solutions for the industrial refrigeration sector
- Automatic Hydraulic Valves and Water Control Systems for Irrigation Sector
- Micro-irrigation systems for greenhouse
- Pressure sensor for Machine and plant construction
- Micro-irrigation systems for open field
- Special plants for recycling municipal solid waste (MSW)
- High Performance Preparation Technology for Dry Mortar and Plaster
- Mixing and Grinding Technology for Sand Lime Brick
- Preparation Technology for the Ceramic Industry
- Cutting-Edge Technologies for Refractory Compounds
- Mixing and Grinding Technology for Preparation of Glass Batches
- Mixing and Grinding Technology for Lead Acid Paste
- Trailblazing Process Technology for Lithium-Ion Batteries
- Preparation Technology for Friction Lining Compounds
- Mixing and Grinding Technology for Foundry Sand
- Preparation Technologies for Metallurgy
- Mixing and Grinding Technology for Environmental
- Eirich System Solutions for Fertilizer
- Monitors, gas analyzers solutions for ISO 14644-1/2: 2015 insights & solutions
- Gas Mass Flow Meters, Sensors & Controllers for High Flow Gas Control
- Shredding solutions for paper waste industry
- Hose and tube pumps for Food and beverage industry
- Micro-irrigation systems for tree crops
- Jaw bucket crushers solution for recycling aggregate sector
- Solutions for water treatment and water disinfection industry
- Water treatment solutions for utility water treatment
- Heat transfer products solutions for the commercial HVAC cooling sector
- Shredding solutions for hospital waste industry
- Shredding solutions for textile and carpets industry
- Pressure sensor for Shipbuilding & marine industry
- Premium gas generators and calibration solutions for gas chromatography (GC) sector
- Machines and plants for industrial waste
- Machines And Systems For Processing Carbon Paste
- Application package FLUXANA Cement, Raw Meal, Clinker
- Application package FLUXANA RAW-PROF
Xprt Equipment Supplied In Italy
36,757 equipment items found
Showcase
Manufactured by:BUCHI based inFlawil, SWITZERLAND
Pre-incineration unit for ash determination. The Wet Digester B-440 is an ecological pre-incineration unit for ash determination in different sample types. Select from a wide temperature range of up to 600 °C for more flexibility. Improve reproducibility with programmable incineration ...
Showcase
Manufactured by:Analytik Jena - Lab-loving people based inJena, GERMANY
Quality is the difference: Unique application diversity (TS, TC, TX, TOC, TIC, EC, AOC). Low maintenance and low operating costs. Fully automated solids sampler with high sample ...
Showcase
Manufactured by:Ferrari Growtech S.P.A. based inGuidizzolo, ITALY
This machine has been developed to have high-technology characteristics. It has been projected for the automatic transplanting of vegetables and tobacco stored in trays. It requires just one operator loading the trays into the charging slide of each single planting element. Each element of the machine is provided with a system, which automatically pulls out, from the longer side of the tray, the ...
Showcase
Manufactured by:LNI Swissgas based inVersoix, SWITZERLAND
H2 POWER 10L is a system able to provide up to 1Nm3/h of hydrogen. The hydrogen is produced from three Hydrogen Generators “6920.16.330” connected in parallel mode. 6920.16.330 uses an electrolytic cell with polymeric membrane (PEM) to produce pure hydrogen from distilled water. No acid or alkaline solutions are used. It is provided with an internal 1.1 litres tank with electronic ...
Showcase
Manufactured by:Myron L Company based inCarlsbad, CALIFORNIA (USA)
This portable water analysis instrument is designed to be extremely accurate, fast and simple to use in diverse water quality applications. Advanced features include the ability to select from 3 different solution types that model the characteristics of the most commonly encountered types of water; proprietary temperature compensation and TDS conversion algorithms; highly stable ...
Showcase
Manufactured by:Weda Robotics based inSödertälje, SWEDEN
YT-600 is a remote controlled vehicle for sediment (sludge) removal in all sorts of reservoirs'. The powerful on-board submersible pump and wide nozzle allows for efficient cleaning of large bottom surfaces. The sediment is pumped through a hose to a seleceted discharge point or to a filter. Traditional cleaning after draining and then removal of the sediment requires the reservoir to be taken ...
Showcase
Manufactured by:ENVEA based inPoissy, FRANCE
CAI PAS Sense analyzers use photoacoustic infrared technology to measure many of the most commonly measured IR-absorbing gases. Gas selectivity is achieved through the use of optical filters that provide both a means of detecting the gas of interest and compensating for interfering gases and water. Both bench-top and rack-mounted PAS configurations are ...
Showcase
Manufactured by:LNI Swissgas based inVersoix, SWITZERLAND
POLLUCE is designed to satisfy the needs of all LCMS brand on the market. It makes use of Pressure Swing Adsorption technology (PSA), through the use of specific selected molecular sieves (CMS), enable to obtain extremely pure nitrogen, this technologies reduced risk of gas contamination and ...
Showcase
Manufactured by:Myron L Company based inCarlsbad, CALIFORNIA (USA)
We are proud of the trust our handheld water quality instruments and monitor/controllers have earned in the past. Our product line has evolved to a new level of outstanding performance and value in analytical instruments: the Ultrameter II series. While priced like affordable single-parameter instruments, the Ultrameter II does the job of up to seven ...
Premium
Manufactured by:LNI Swissgas based inVersoix, SWITZERLAND
This H2-SENSOR Kit is a security system that constantly detects the amount of Hydrogen present in the GC’s oven and blocks the Hydrogen generation if it detects an amount greater than the safety threshold. The 6940.00.055 controller reads the percentage of Hydrogen measured by the sensor 6940.00.070 and, if the value exceeds the threshold alarm, the Controller deactivates the solenoid valve ...
Premium
Manufactured by:LNI Swissgas based inVersoix, SWITZERLAND
The multigas Sonimix 6000 C2 calibrator is designed to calibrate manually or by remote control up to 6 monitors installed in an air pollution monitoring station, for parameters such as SO2, HC, BTX, CO, NOx and O3. The Sonimix 6000 C2 includes Mass Flow Controllers, GPT, ozone and self re-generable zero air generator and is equipped with – an inlet for high concentration mixtures of diluted ...
Premium
Manufactured by:Intecna srl based inMediglia (Ml), ITALY
Regarding PIPELINE DEWATERING OPERATION, it is well known that natural gas hydrates are clathrate compounds in which natural gas molecules are encased in cages of water molecules to form a solid ice-like substance. This innovative process is very helpful for different applications, as mobile sludge dewatering, construction dewatering, and site dewatering ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
The Vacuum Pump V-80 / V-180 is a chemically resistant and affordable vacuum source with a compact design. The speed-control solution guarantees the vacuum pump operates quietly and without ...
Premium
Manufactured by:LNI Swissgas based inVersoix, SWITZERLAND
The NitroGen series CASTORE PRO HP are Membrane Nitrogen Generators. They are engineered to transform standard compressed air into a safe, regulated supply of Nitrogen with a purity greater than 99.5%. The exclusive electronic flow control allows to generate Nitrogen with a higher purity using a smaller volume of air which results in reduced energy costs and maintenance of any external ...
Premium
Manufactured by:LNI Swissgas based inVersoix, SWITZERLAND
The NitroGen series NGA CASTORE XL iQ are Membrane Nitrogen and dry air Generators. They are engineered to transform standard compressed air into a safe, regulated supply of Nitrogen up to 40 L/min with a purity up to 99.8%. A channel can provide up to 60 L/min of compressed, dry and regulated air. This NGA series is equipped with a scroll built-in oil less compressor with inverter technology. ...
Premium
Manufactured by:ProMinent GmbH based inHeidelberg, GERMANY
5-50 kg/h of dry PAC with a re-dilution of 3-5 m3/h and a final concentration of max. 1%. Conventional waste water treatment cannot adequately remove trace elements, such as medication or cosmetic residue from the waste water. This is particularly effective using the complete system for the precise metering of powdered active carbon ...
Premium
Manufactured by:Kurita Water Industries Ltd based inTokyo, JAPAN
Our LABUFLOC polymers are additives for the improvement of retention and drainage. Furthermore organic, inorganic and combined products for fiber recovery and sludge dewatering are ...
Premium
Manufactured by:ProMinent GmbH based inHeidelberg, GERMANY
Capacity range of single-head pump: 7 – 1,506 l/h, 100 – 7 bar - The HYDRO API 675 is an extremely robust hydraulic diaphragm metering pump, which meets the most exacting safety requirements and is designed in accordance with API 675. This is ensured by the PTFE multi-layer diaphragm with diaphragm monitoring, the full-motion drive and automatic bleeding, for example. Its modular ...
Premium
Manufactured by:Dragflow S.r.l. based inRoverbella MN, ITALY
The EL7.5 is an electric pump with high abrasion resistance and can handle material concentrations up to 70%. It is the ideal solution for industrial, mining, and dredging applications in other fields, guaranteeing maximum efficiency and ...
Premium
Manufactured by:LNI Swissgas based inVersoix, SWITZERLAND
The NitroGen series CASTORE PRO are Membrane Nitrogen Generators. They are engineered to transform standard compressed air into a safe, regulated supply of Nitrogen with a purity up to ...