- Home
- ivory coast
- Equipment
Refine by
Xprt Equipment Supplied In Ivory Coast
409 equipment items found
Showcase
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
The device is used to monitor and record the quality of the SF6 gas in a gas compartment. The following quality parameters can be determined with only one measurement: SF6 volume percentage (%). Moisture concentration (°C atmosphere, °C pressure, °F atmosphere, °F pressure, ppmv, ppmw). SO2-Concentration ...
Premium
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
DILO couplings allow a connection to be made by simply screwing the two coupling parts together. Before the metal to metal seal closes the pressure and vacuum tight coupling is sealed inside by means of an O-ring. When loosening the coupling parts again, the same O-ring prevents gas loss whilst the self seal valves ...
Premium
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
Used SF6 with a SO2 content of ≥ 250 ppmv. Manufactured according to technical regulations for compressed gases with TÜV certificate. Gas cylinder labelling in accordance with DIN EN 1089. ...
Premium
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
The cordless battery-operated LEAKSPY C4 precisely measures the C4-FN concentration in air by means of a non-dispersive infrared sensor (NDIR sensor) and indicates the value on a graphic display in ppm. The device allows precise localisation of leaks by searching the highest C4-FN concentration.Thanks to the high resolution and detection limit, it is also possible to carry out integral ...
Premium
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
For the economic recovery of xenon from production plants. Special features/Process: Evacuation of the customer's test chamber. Filling of the chamber with xenon. After successful testing inside the chamber, the gas is recovered and stored into cylinders. Permanent monitoring of the gas quality by means of an O2 sensor. Reuse of the recovered gas if the gas quality complies with the ...
Premium
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
These tanks offer sufficient volume to store or withdraw even large gas quantities in gaseous or liquid form – special feature of this type series: for withdrawal of liquid gas, the entire gas content can be withdrawn all at once without having to heat the tank. The tanks are equipped with digital weighing scales. These weighing scales enable to determine the filling weight with an accuracy ...
Premium
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
The L030R02 model of the Piccolo series has been specially designed for modern switchgear with small gas compartments. Due to its compact construction this device fits conveniently onto a euro pallet for transport and is easily manoeuvrable even in the very narrow passage ways of gas insulated switchgear. The device is operated via a 3.5” colour touch panel where icons are clearly displayed ...
Premium
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
Unit for the precise production of gas mixtures. Accuracy of the gas mixtures to be produced up to ± 0.1 vol. %. A total of up to four different gases can be mixed. Mixing to the desired target weight or to the desired final pressure. Final vacuum after recovering the mixing vessel: < 1 mbar. Storage of the gas in adequate pressure vessels after the mixing process. Storage pressure up ...
Premium
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
The weighing scales have been developed specially for large containers used for example in GIS production or in large substations. The weighing range of the device is up to 2,000 kg. The determined weight is indicated on the display immediately. The integrated serial interface is a special feature allowing data communication with other DILO devices. Thus, not only the weight can be read on the ...
Premium
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
With atmospheric test chambers it is not necessary to evacuate air before the test process. Test chambers of this construction type can be manufactured at significantly lower cost with a significantly larger volume than vacuum chambers. We build these chambers with a chamber volume of up to 50 m³ as standard. This allows for reliable testing of even larger units and ...
Premium
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
The H2 filling station enables the refueling of gaseous hydrogen from up to 4 different H2 storage tanks (cylinder bundles). The filling process is simple and uncomplicated, it can be started quickly and runs automatically. Depending on the pre-pressure in the H2 storage tanks, a vehicle can be refueled up to a maximum of 300 bar. Gas type: H2. ...
Premium
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
For efficient handling of SF6/N2/CF4 gas mixtures. For this special application we supply different high performance devices. Thus efficient handling of large volume GIL lines is no ...
Premium
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
Integrated pressure monitoring for leak control. Special features: Complete realisation, ranging from the design to the commissioning. Piping systems can be realized in various materials, e.g. in copper or stainless steel. Integration into existing fabrication hall construction is possible. Use of gastight DILO unions without intermediate seal compound. Production in nominal diameters of up to ...
Premium
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
For reliable continuous cooling. The essential advantage of our refrigeration units is that the cooling is carried out by means of water outside the transformer. This is to prevent the transformer from being damaged if leaks occur. The cooling systems can be connected to the gas insulated transformer directly and are optimally suited for continuous ...
Premium
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
The DILO manifolds help to significantly increase the efficiency of gas handling with service carts in the GIS unit production or at utility companies. The standard DILO manifolds are equipped with three DN20 connections as well as a DN20 or DN40 connection to the service cart. Thus, it is possible to recover, to evacuate or to fill three gas compartments at the same ...
Premium
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
For gaseous or liquid storage of SF6 gas. For the central gas stock we offer storage tanks for intermediate storage of large SF6 quantities available for gaseous storage to 25 bar and liquid storage to 50 ...
Premium
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
Portable in a tansport case with rubber hose, DILO couplings DN8 (M24x1.5), pressure range -1 up to 9 bar, safety valve 4.0 bar rel. The handy device allows filling of electrical equipment with CA gas directly from the cylinder by ...
Premium
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
Unit for quick and precise leak testing of vacuum tight series components and helium ...
Premium
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
Vacuum testing of smaller components (without gas handling): This model range with a chamber volume of approx. 50 - 500 l is the ideal solution for testing smaller components where gas handling can take place outside the test ...
Manufactured by:Side Industrie based inVillemer, FRANCE
Engine with cage three-phase 50Hz normalized - Classify F - IP67 as standard. Hydraulics with effect Whirlpool. Strong capacity of inhalation. Consequent complete passage from 70 mm to 150 mm admitting a important mixture gas / liquid. Volute in matrixed stainless steel thickness minimum 4 ...