- Home
- ivory coast
- Equipment
Refine by
Xprt Equipment Supplied In Ivory Coast
409 equipment items found
Showcase
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
The device is used to monitor and record the quality of the SF6 gas in a gas compartment. The following quality parameters can be determined with only one measurement: SF6 volume percentage (%). Moisture concentration (°C atmosphere, °C pressure, °F atmosphere, °F pressure, ppmv, ppmw). SO2-Concentration ...
Premium
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
The test pressure for gas analysis in medium voltage switchgear is often too low. For this reason the compressor unit is needed to compress the gas to be measured so that there is sufficient pressure for the gas measuring devices connected downstream from the compressor unit. As the device is leak-tested there are no SF6 emissions. The oilfree compression avoids the SF6 test gas from being ...
Premium
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
Density monitors can be verified directly at the gas compartment or disassembled for external tests without having to recover the gas from switchgear by means of these lock valves. The valve securely separates the assembled density monitor from the gas compartment. In combination with the Densi-Control IN (B178R51) density monitor testing device it is also possible to quickly and easily verify ...
Premium
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
The L170 service cart has been developed to recover, evacuate, fill, purify and vent large to extra large SF6 gas compartments with high process reliability. Thus, a gas compartment with 1,000l and 5 bar pa can be recovered down to 1 mbar in only 38 minutes*) when using the DN40 coupling**). Thanks to the state-of-the art control all functions run automatically and are displayed on a 10“ ...
Premium
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
Technical data: Dimensions: Length 435 mm, Width 270 mm, Height 370 mm. Weight: 29 kg. Standard equipment: Vacuum pump for evacuation of air 16 m³/h (at 50 Hz) and 19 m³/h (at 60 Hz), final vacuum < 1 mbar. DILO couplings DN20. Ball valve or solenoid valve DN20. Digital vacuum indication (0 - 400 mbar). 3 m long electrical connecting cable. Operating ...
Premium
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
Final vacuum ‹ 1 mbar. DILO couplings DN20. 550 x 430 x 800 mm, 80 kg. Operating voltage: AC 200-240 V, 50/60 ...
Premium
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
This bag is a simple and cost-effective system for collecting measuring gas in case it cannot be returned directly into the circuit breaker. Its handling is very easy: Connect the bag with the hose included in the scope of supply to the measuring device. The discharge gas collecting bag allows collecting the SF6 from up to 25 measurements. The gas can be removed by means of any service cart. When ...
Premium
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
This bag is a simple and cost-e?ffective system for collecting measuring gas in case it cannot or is not desired to returned. Its handling is very easy: Connect the bag with the hose included in the scope of supply to the measuring device. The discharge gas collecting bag allows collecting the gas from up to 42 liter. The gas can be removed from the discharge gas collecting bag with any service ...
Premium
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
During the operation of gas insulated switchgear decomposition products might occur after a breakdown which has a negative impact on the gas quality in the circuit breaker as well as on the insulation properties. For this reason the measurement of decomposition products is very important. The measurement can be carried out easily by means of test tubes and plastic ...
Premium
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
These maintenance units are our most powerful devices and guarantee quick maintenance of gas compartments. Thanks to the state-of-the art control all functions run automatically and are displayed on a 10" multi-touch screen. A new software with intuitive user navigation makes operation very easy and comfortable. This service cart can optionally be operated via smartphone, tablet or ...
Premium
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
This series is very powerful and allows quick evacuation of large gas compartments. A vacuum pump combined with a Roots pump enables to obtain a final vacuum of 2x 10-2 mbar. Thus not only air but also moisture is removed from the circuit breakers. Therefore the subsequent filling process is prepared perfectly. Three coupling connections (DN20 and 2 x DN40) allow the evacuation of two gas ...
Premium
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
For adsorption of moisture, solid and gaseous decomposition ...
Premium
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
The ServiceCart H2 supports workshop employees in all work related to hydrogen systems in vehicles. The device can perform service functions fully automatically. Gas type: H2. ...
Premium
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
For quick detection and quantification of small SF6 leaks The cordless battery-operated LeakSpySF6 precisely measures SF6 concentrations in air by means of a non-dispersive infrared sensor (NDIR sensor) and indicates the value on a graphic display in ppmv. The device allows precise localisation of leaks by searching the highest SF6 concentration. Thanks to the high accuracy and the low detection ...
Premium
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
With its innovative equipment and intuitive user interface, the MultiAnalyser SF6 meets the user’s requirements and is ready for operation immediately after switching on. High-quality manufacture and ergonomic design guarantee the quality standards for a compact and maintenance-friendly measuring device with high measuring accuracy. This multi-functional measuring device allows the ...
Premium
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
We also deliver custom-tailored solutions for the SF6 gas handling of electron accelerators. Compared to the "normal" gas handling in the energy sector, larger SF6 gas volumes – usually several tons – have to be handled in the field of electron accelerators. Therefore, high-performance system components as well as large supply lines (up to DN 100) are needed, so that the gas volume ...
Premium
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
In case a mobile unit is not your preferred choice, it is also possible to install suction pumps in an existing service cart to be able to reclaim gas in accordance with the IEC 62271 ...
Premium
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
SF6 gas handling plant for an SF6 pressure turbulence channel with remote control for local operation. The plant serves for evacuation, gas recovery, and filling of a large volume wind ...
Premium
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
These tanks offer sufficient volume to safely store or withdraw even large gas quantities. The digital integrated weighing scales allow to determine the filling weight with an accuracy of up to ±500 ...
Premium
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
The F-gas regulation (EU) 517/2014 stipulates regular verification of density monitors installed in switchgear. The DensiControl DA allows quick checking to see whether the density monitor switching points are triggered in time. This device allows precise, quick and easy verification of the switching points. The density monitor type to be checked is selected in the data base and is then installed ...