Refine by
Applications
- Incinerator solutions for the hotel / resort sector
- Incinerator solutions for the mining / exploration sector
- Incinerator solutions for the industrial / factory waste sector
- Hazardous waste incinerators for medical sector
- Large medical incinerators for hospital use
- Small medical incinerators for health clinics and labs
- Medical waste incinerators for laboratories
- Incinerator solutions for the pharmaceutical sector
- Incinerator solutions for the pathological sector
- Incinerator solutions for the abattoir / slaughterhouse waste sector
- Incinerator solutions for the farm sector
- Industrial waste solutions for compound feed industry
- Advanced FT-NIR Analysis for Food Industry
- FT-NIR Analaysis for alcoholic beverages industry
- Advanced FT-NIR Solutions for Pharmaceutical Development and Manufacturing Sector
- FT-NIR analaysis for chocolate & cocoa sector
- FT-NIR analaysis for fish & seafood sector
- FT-NIR analysis for coffee sector
- FT-NIR analysis for measuring meat products sector
- FT-NIR spectroscopy in rapid detection of paprika adulteration sector
- FT-NIR spectroscopy in sugarcane liquor industry
- FT-NIR analaysis for meat & poultry industry
- FT-NIR analaysis for non-alcoholic beverages sector
- FT-NIR analaysis for snack food industry
- FT-NIR analaysis for spices & raw ingredients sector
- Detecting melamine adulteration in milk powder sector
- FT-NIR analysis for pharmaceutical raw material identification sector
- FT-NIR analysis for verifying raw materials through plastic and paper packaging industry
- Flow & energy management solutions for HVAC & facility
- Advanced FT-NIR Analysis for Chemicals & Polymers Industry
- Industrial waste solutions for chemical industry
- Wastewater Treatment Systems for Biological Wastewater Treatment
- Liquid chromatography–mass spectrometry for testing laboratory
- Flow & energy management solutions for water & wastewater industry
- AMANDUS KAHL Pelleting plants for Feed industry
- Pelleting plants for Recycling industry
- Near-Infrared Analysis for Edible Oil Sector
- Flow & energy management solutions for building automation industry
- Flow & energy management solutions for power & thermal plant sector
- Flow & energy management solutions for pulp & paper industry
- Chemical Oxygen Demand (COD) Analyzer for Industrial & Municipal Wastewater Industry
- Industrial waste solutions for Pelleting of Biomass industry
- Industrial waste solutions for food industry
- Pelleting plants for Biomass industry
- Dust control solutions for mining industry
- Dust control solutions for municipal industry
- Dust control solutions for construction industry
- Dust control solutions for agriculture industry
- Dust control solutions for other applications
- Near-Infrared Analysis for Rice Sector
- Advanced FT-NIR Solutions for Tobacco Processors and Manufacturers Sector
- Industrial waste solutions for recycling industry
- Flow & energy management solutions for utility & management sector
- Flow & energy management solutions for chemical industry
- Flow & energy management solutions for food and beverage industry
- Flow & energy management solutions for pharmaceutical & semiconductor industry
- Flow & energy management solutions for plant & machine
- Flow & energy management solutions for vehicle and vessel sector
- Chemical Oxygen Demand (COD) Analyzer for Craft Brewers
- Chemical Oxygen Demand (COD) Analyzer for Cleaner and Safer Drinking Water
- Chemical Oxygen Demand (COD) Analyzer for Food & Beverage Industry
- Advanced FT-NIR Analysis for Agricultural Industry
- Pelleting plants for Food industry
- Pelleting plants for Chemistry and Pharmacy
- Advanced FT-NIR Analysis for Feed & Forage Sector
- Lab Instruments for Diesel
- Process Analytics for Asphalt
- Process Analytics for Coatings, Paints & Inks
- Process Analytics for Fuel
- Process Analytics for Nitrogen & Sulfur
- Process Analytics for Oil Analysis
- Biomass Pelleting - Wood Pelleting
- Biomass Pelleting - Wood Pelleting
- Biomass Pelleting - Straw Pelleting
- Sludge pelleting for municipal sewage sludge
Xprt Equipment Supplied In Kenya
2,343 equipment items found
Showcase
Manufactured by:Galaxy Scientific Inc based inNashua, NEW HAMPSHIRE (USA)
The QuasIR™ 4000 FT-NIR spectrometer was designed from the ground up to offer the industry a new kind of NIR analysis solution – a solution that brings together the portability required to move NIR analysis closer to point-of-need, combined with unmatched spectroscopic performance for the fastest and most accurate results. It was engineered to ensure direct calibration transfer ...
Showcase
Manufactured by:BioKube A/S based inTappernoje, DENMARK
BioKube Jupiter systems are predominantly used for cities, gated communities and resorts. BioKube Jupiter systems are delivered fully equipped ready to be installed as a plug and play unit. Each unit contains a treatment zone with aerated filters and a settling zone to remove all ...
Showcase
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
The device is used to monitor and record the quality of the SF6 gas in a gas compartment. The following quality parameters can be determined with only one measurement: SF6 volume percentage (%). Moisture concentration (°C atmosphere, °C pressure, °F atmosphere, °F pressure, ppmv, ppmw). SO2-Concentration ...
Premium
Manufactured by:BioKube A/S based inTappernoje, DENMARK
BioKube UltraCLean system is an advanced water treatment device designed for removing all particles including bacteria and Nematodes from river water and other natural water sources. The water is treated by means of an extremely durable and efficient, third generation ultra-filtration membrane placed in an aeration ...
Premium
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
Density monitors can be verified directly at the gas compartment or disassembled for external tests without having to recover the gas from switchgear by means of these lock valves. The valve securely separates the assembled density monitor from the gas compartment. In combination with the Densi- Control IN (B178R51) density monitor testing device it is also possible to quickly and easily verify ...
Premium
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
Operating voltage: 100 - 240 V / 50 / 60 Hz alternating current. For helium recovery down to 5 mbar in combination with the MINI compressor HE-ZB095R12. The MINI-SERIES HE stands for efficient gas handling of small gas compartments with a gas recovery of up to 5 mbar. The handy mini-components for recovering, consisting of the compressor and a Vacuum compressor, are connected to a unit via Wire ...
Premium
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
For reliable continuous cooling. The essential advantage of our refrigeration units is that the cooling is carried out by means of water outside the transformer. This is to prevent the transformer from being damaged if leaks occur. The cooling systems can be connected to the gas insulated transformer directly and are optimally suited for continuous ...
Premium
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
The L170 service cart has been developed to recover, evacuate, fill, purify and vent large to extra large SF6 gas compartments with high process reliability. Thus, a gas compartment with 1,000l and 5 bar pa can be recovered down to 1 mbar in only 38 minutes*) when using the DN40 coupling**). Thanks to the state-of-the art control all functions run automatically and are displayed on a 10“ ...
Premium
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
The mobile suction pump allows upgrading old SF6 maintenance devices. Thus it is possible to recover the SF6 gas from the gas compartment to a final vacuum of 1 mbar by connecting in series the mobile suction ...
Premium
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
The MINI SERIES C4/C5 is perfectly suited for efficient gas handling of small gas compartments and gas recovery down to < 5 mbar. It is specially designed for the handling of gas mixtures based on 3M Novec 4710 or 3M Novec 5110. The working pressures allow gaseous storage in order to prevent demixing. Thus, filling of the gas mixture from the gas compartment into a transport cylinder as well ...
Premium
Manufactured by:Casella based inKempston, UNITED KINGDOM
The VAPex range has been designed particularly for low flow sampling of vapours and gases in working environments. Its Intrinsically Safe design and remote operation via the Airwave App makes it ideal for modern day sampling requirements. With a wide flow range of 20mL - 500mL, the VAPex personal sampling pump has outstanding back pressure capability. This capability ensures uninterrupted smooth ...
Premium
Manufactured by:BioKube A/S based inTappernoje, DENMARK
BioKube basic technology of submerged aerated filters built in a number of standard units are easily scalable. Much like children playing with LEGO toy plastic building blocks. If the child wants to build a bigger house, he uses more LEGO blocks. If you need a bigger wastewater system, you need only more standard BioKube ...
Premium
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
For adsorption of gaseous and dusty decomposition products in large gas compartments. B148R03: Mobile pre-filter unit DN20 (pe 16 bar). B148R04: Mobile pre-filter unit DN40 (pe 16 ...
Premium
Manufactured by:BioKube A/S based inTappernoje, DENMARK
BioKube’s Mars 5000 system is a STP most commonly used for smaller residential housing groups or tourist accommodation sites. The Mars 5000 system is typically installed after a buffer tank and a septic tank either in- or above ...
Premium
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
These tanks offer sufficient volume to safely store or withdraw even large gas quantities. The digital integrated weighing scales allow to determine the filling weight with an accuracy of up to ±500 ...
Premium
Manufactured by:Casella based inKempston, UNITED KINGDOM
The Guardian2 Site Boundary Monitor is designed to help you remain compliant with site emission levels, using remote monitoring and reporting of noise, dust and vibration levels. Powered by mains, solar or battery, the Guardian2 is ideal for any construction noise monitoring and ground vibration, no matter how remote. For further details on solar or battery power options see the solar and battery ...
Premium
Manufactured by:BioKube A/S based inTappernoje, DENMARK
A sludge drying bed is a common method utilized to dewater sludge via filtration and evaporation. Perforated pipes situated at the bottom of the bed are used to drain sewage water or filtrate. A reduction of about 70% in moisture content is expected after drying. Each normal size sludge bed will be 3x6 m2 (18 m2), a small size sludge bed will be 2x4 m2 (8 ...
Premium
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
Technical data: Dimensions: Length 435 mm, Width 270 mm, Height 370 mm. Weight: 29 kg. Standard equipment: Vacuum pump for evacuation of air 16 m³/h (at 50 Hz) and 19 m³/h (at 60 Hz), final vacuum < 1 mbar. DILO couplings DN20. Ball valve or solenoid valve DN20. Digital vacuum indication (0 - 400 mbar). 3 m long electrical connecting cable. Operating ...
Premium
Manufactured by:Casella based inKempston, UNITED KINGDOM
Ideal for area sampling of airborne contaminants including Asbestos and other hazardous materials. The award-winning Vortex3 is the latest generation of static, high flow rate sampling pumps, which can now be controlled and monitored from your mobile phone or tablet. ...
Premium
Manufactured by:BioKube A/S based inTappernoje, DENMARK
BioContainer Systems are containerized Sewage Treatment Plants, most commonly used for treating waste water at camps, oil rig sites & remote locations. BioContainer comes in different versions of integration of cleanings steps, transportability and capacity. The systems are typically installed above ground for non-permanent installations. ...
