Refine by
Applications
- Incinerator solutions for the hotel / resort sector
- Incinerator solutions for the mining / exploration sector
- Incinerator solutions for the industrial / factory waste sector
- Hazardous waste incinerators for medical sector
- Large medical incinerators for hospital use
- Small medical incinerators for health clinics and labs
- Medical waste incinerators for laboratories
- Incinerator solutions for the pharmaceutical sector
- Incinerator solutions for the pathological sector
- Incinerator solutions for the abattoir / slaughterhouse waste sector
- Incinerator solutions for the farm sector
- Industrial waste solutions for compound feed industry
- Advanced FT-NIR Analysis for Food Industry
- FT-NIR Analaysis for alcoholic beverages industry
- Advanced FT-NIR Solutions for Pharmaceutical Development and Manufacturing Sector
- FT-NIR analaysis for chocolate & cocoa sector
- FT-NIR analaysis for fish & seafood sector
- FT-NIR analysis for coffee sector
- FT-NIR analysis for measuring meat products sector
- FT-NIR spectroscopy in rapid detection of paprika adulteration sector
- FT-NIR spectroscopy in sugarcane liquor industry
- FT-NIR analaysis for meat & poultry industry
- FT-NIR analaysis for non-alcoholic beverages sector
- FT-NIR analaysis for snack food industry
- FT-NIR analaysis for spices & raw ingredients sector
- Detecting melamine adulteration in milk powder sector
- FT-NIR analysis for pharmaceutical raw material identification sector
- FT-NIR analysis for verifying raw materials through plastic and paper packaging industry
- Flow & energy management solutions for HVAC & facility
- Advanced FT-NIR Analysis for Chemicals & Polymers Industry
- Industrial waste solutions for chemical industry
- Wastewater Treatment Systems for Biological Wastewater Treatment
- Liquid chromatography–mass spectrometry for testing laboratory
- Flow & energy management solutions for water & wastewater industry
- AMANDUS KAHL Pelleting plants for Feed industry
- Pelleting plants for Recycling industry
- Near-Infrared Analysis for Edible Oil Sector
- Flow & energy management solutions for building automation industry
- Flow & energy management solutions for power & thermal plant sector
- Flow & energy management solutions for pulp & paper industry
- Chemical Oxygen Demand (COD) Analyzer for Industrial & Municipal Wastewater Industry
- Industrial waste solutions for Pelleting of Biomass industry
- Industrial waste solutions for food industry
- Pelleting plants for Biomass industry
- Dust control solutions for mining industry
- Dust control solutions for municipal industry
- Dust control solutions for construction industry
- Dust control solutions for agriculture industry
- Dust control solutions for other applications
- Near-Infrared Analysis for Rice Sector
- Advanced FT-NIR Solutions for Tobacco Processors and Manufacturers Sector
- Industrial waste solutions for recycling industry
- Flow & energy management solutions for utility & management sector
- Flow & energy management solutions for chemical industry
- Flow & energy management solutions for food and beverage industry
- Flow & energy management solutions for pharmaceutical & semiconductor industry
- Flow & energy management solutions for plant & machine
- Flow & energy management solutions for vehicle and vessel sector
- Chemical Oxygen Demand (COD) Analyzer for Craft Brewers
- Chemical Oxygen Demand (COD) Analyzer for Cleaner and Safer Drinking Water
- Chemical Oxygen Demand (COD) Analyzer for Food & Beverage Industry
- Advanced FT-NIR Analysis for Agricultural Industry
- Pelleting plants for Food industry
- Pelleting plants for Chemistry and Pharmacy
- Advanced FT-NIR Analysis for Feed & Forage Sector
- Lab Instruments for Diesel
- Process Analytics for Asphalt
- Process Analytics for Coatings, Paints & Inks
- Process Analytics for Fuel
- Process Analytics for Nitrogen & Sulfur
- Process Analytics for Oil Analysis
- Biomass Pelleting - Wood Pelleting
- Biomass Pelleting - Wood Pelleting
- Biomass Pelleting - Straw Pelleting
- Sludge pelleting for municipal sewage sludge
Xprt Equipment Supplied In Kenya
2,343 equipment items found
Showcase
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
The device is used to monitor and record the quality of the SF6 gas in a gas compartment. The following quality parameters can be determined with only one measurement: SF6 volume percentage (%). Moisture concentration (°C atmosphere, °C pressure, °F atmosphere, °F pressure, ppmv, ppmw). SO2-Concentration ...
Premium
Manufactured by:Galaxy Scientific Inc based inNashua, NEW HAMPSHIRE (USA)
The QuasIR 3000 FT-NIR spectrometer was designed from the ground up to offer the industry a new kind of NIR analysis solution – a solution that brings together the portability required to move NIR analysis closer to point-of-need, combined with unmatched spectroscopic performance for the fastest and most accurate results. ...
Premium
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
For determination of moisture Moisture is the most important criteria for the determination of the gas quality. This device has been designed specially for SF6 moisture measurements. It also shows a higher resistance against contamination and SF6 decomposition products than conventional moisture sensors and even minimises the usual long-time drifting. The integrated electronic flow meter supports ...
Premium
Manufactured by:BioKube A/S based inTappernoje, DENMARK
BioKube’s Pluto systems are small STP plants designed for treating sewage water from single households. The Pluto systems are typically installed after a septic tank either in- or above ...
Premium
Manufactured by:BioKube A/S based inTappernoje, DENMARK
When mineralizing organic matter in the sludge, 60-70 per cent of the dry matter is transferred into C02, oxygen, free nitrogen and partly dewatered soil particles. The sludge is dewatered, depending on the local climate, to a dry matter content of 35% to 60% within two to three weeks. In the long term the sludge will be reduced to 2-4% of the originally applied volume. This reduces management ...
Premium
Manufactured by:BioKube A/S based inTappernoje, DENMARK
BioKube Saturn systems are installed above ground. In Saturn systems, the focus is on reducing initial cost of civil ...
Premium
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
The DILO manifolds help to significantly increase the efficiency of gas handling with service carts in the GIS unit production or at utility companies. The standard DILO manifolds are equipped with three DN20 connections as well as a DN20 or DN40 connection to the service cart. Thus, it is possible to recover, to evacuate or to fill three gas compartments at the same ...
Premium
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
New SF6 as well as used SF6 with a SO2 content of < 250 ppmv. Manufactured according to technical regulations for compressed gases with TÜV certificate. Gas cylinder labelling in accordance with DIN EN ...
Premium
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
For safe refilling of SF6 gas into gas compartments by overpressure The handy device allows filling of electrical equipment with SF6 gas directly from the cylinder by overpressure. The primary gauge of the pressure reducer displays the cylinder pressure in bar, psi and kPa. The secondary gauge indicates the desired filling pressure to be set easily by means of the handle. The cylinder pressure ...
Premium
Manufactured by:BioKube A/S based inTappernoje, DENMARK
BioKube Venus and Pluto systems are designed for wastewater from 5 - 30 PE. Venus and Pluto systems will typically be used for individual houses, or up to 6 houses close to each other, or small hotels & Bed and Breakfast sites. Venus and Pluto systems are installed after a septic tank. The systems are pre-fabricated solutions, delivered to the customer ready to install as Plug & Play and ...
Premium
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
Technical data: Dimensions: Length 435 mm, Width 270 mm, Height 370 mm. Weight: 29 kg. Standard equipment: Vacuum pump for evacuation of air 16 m³/h (at 50 Hz) and 19 m³/h (at 60 Hz), final vacuum < 1 mbar. DILO couplings DN20. Ball valve or solenoid valve DN20. Digital vacuum indication (0 - 400 mbar). 3 m long electrical connecting cable. Operating ...
Premium
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
Used SF6 with a SO2 content of ≥ 250 ppmv. Manufactured according to technical regulations for compressed gases with TÜV certificate. Gas cylinder labelling in accordance with DIN EN 1089. ...
Premium
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
DensiControl IN with connecting kit and 6 m long measuring hose. The F-gas regulation (EU) 517/2014 stipulates regular verification of density monitors installed in switchgear. In combination with a DILO lock valve it is possible to quickly check whether the density monitor switching points are triggered in time without disassembling the density monitor. Thus, the DensiControl IN allows very ...
Premium
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
The MINI SERIES C4 is perfectly suited for efficient gas handling of small gas compartments and gas recovery down to < 5 mbar. It is specially provided for the handling of gas mixtures (Alternative Insulating Gases). The handy individual MINI components for recovery, consisting of a compressor and a vacuum compressor, are connected to the unit via wire-braided ...
Premium
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
Unit for quick and precise leak testing of vacuum tight series components and helium ...
Premium
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
Refilling device as cylinder cart for comfortable on board carrying of a gas bottle. The primary gauge of the pressure reducer displays the bottle pressure in bar, psi and kPa. The secondary gauge indicates the desired filling pressure to be set easily by means of the handle. The bottle pressure can be reduced to the desired filling pressure by the integrated pressure reducer. The weight of the ...
Premium
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
The MINI SERIES C4/C5 is perfectly suited for efficient gas handling of small gas compartments and gas recovery down to < 5 mbar. It is specially designed for the handling of gas mixtures based on 3M Novec 4710 or 3M Novec 5110. The working pressures allow gaseous storage in order to prevent demixing. Thus, filling of the gas mixture from the gas compartment into a transport cylinder as well ...
Premium
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
This series is very powerful and allows quick evacuation of large gas compartments. A vacuum pump combined with a Roots pump enables to obtain a final vacuum of 2x 10-2 mbar. Thus not only air but also moisture is removed from the circuit breakers. Therefore the subsequent filling process is prepared perfectly. Three coupling connections (DN20 and 2 x DN40) allow the evacuation of two gas ...
Premium
Manufactured by:Casella based inKempston, UNITED KINGDOM
Make all the measurements necessary for Hand Arm Vibration risk assessments. Casella's Tri-Axial Hand Arm Vibration Meter has been specifically designed for Hand Arm Vibration Exposure ...
Premium
Manufactured by:Galaxy Scientific Inc based inNashua, NEW HAMPSHIRE (USA)
The QuasIR 1000 is an FT-NIR spectrometer that brings together portability with unmatched spectroscopic performance. It features a transmission chamber that can hold various sizes of cuvettes and glass vials up to 10mm. Optional temperature control is offered; the sample compartment can be heated to 100°C or cooled to 20°C, for a wide range of applications. Liquid samples such as edible ...