Show results for
Refine by
Applications
- Process analyzers & instruments for continuous emissions monitoring (CEM)
- Process analyzers & instruments for oxygen measurement
- Gas safety and process control for gas/oil/coal-fired power generation and refineries
- On-Line gas, particulate analyzers, flow monitors, data acquisition for combustion
- On-Line gas,particulate analyzers, flow monitors, data acquisition for cement plants
- On-Line gas,particulate analyzers, flow monitors, data acquisition for glass works
- On-Line gas,particulate analyzers, flow monitors, data acquisition for process control
- Process analyzers & instruments for NOx reduction
- Process analyzers & instruments for furnace atmosphere control
- Process analyzers & instruments for combustion efficiency and fuel air ratio
Stack Sampling Equipment Supplied In Kuwait
16 equipment items found
Premium
Manufactured by:ENVEA based inPoissy, FRANCE
The dry extractive SEC system dries the gas sample at the sampling point, eliminating the necessity of an expensive heated sampling line. It uses an exclusive high performance permeation technique, designed to meet almost all gas sample conditions. Ideal for highly soluble and corrosive gases. Optional built-in temperature & velocity sensors or STACKFLOW 200 flow meter on the same ...
Premium
Manufactured by:ENVEA based inPoissy, FRANCE
Gas Sampling system for use in combination with low concentration analyzers (Ambient Air ...
Premium
Manufactured by:ENVEA based inPoissy, FRANCE
MVS 2M is a multichannel system allowing to distribute two, three or four channels of fluids and signals to a gas monitoring system (GMS). Its function is to link the GMS with the sampling systems for gas and span gas, and to allow the redundancy ...
by:CMC Solutions, LLC based inFarmington Hills, MICHIGAN (USA)
The SmartCEMS® Probe is a component of a predictive emission monitoring system (PEMS) that provides for continuous stack gas sampling for pollutants and diluents under U.S. EPA 40 CFR Part 60 and/or U.S. EPA 40 CFR Part 75 regulations. The Probe will meet the requirements for sampling during model development and PEMS QA activity. The Probe ...
by:CMC Solutions, LLC based inFarmington Hills, MICHIGAN (USA)
The SmartCEMS® Sample Interface Panel is a component of a predictive emission monitoring system (PEMS) that provides for continuous stack gas sampling for pollutants and diluents under U.S. EPA 40 CFR Part 60 and/or U.S. EPA 40 CFR Part 75 regulations. The Sample Interface Panel will meet the requirements for ...
by:CMC Solutions, LLC based inFarmington Hills, MICHIGAN (USA)
The SmartCEMS® Sample Line is a component of a predictive emission monitoring system (PEMS) that provides for continuous stack gas sampling for pollutants and diluents under U.S. EPA 40 CFR Part 60 and/or U.S. EPA 40 CFR Part 75 regulations. The Sample Line will meet the requirements for sampling during model ...
by:CMC Solutions, LLC based inFarmington Hills, MICHIGAN (USA)
The SmartCEMS Portable Gas Analyzer System is a component of a predictive emission monitoring system (PEMS) that provides for continuous stack gas sampling for pollutants and diluents under U.S. EPA 40 CFR Part 60 and/or U.S. EPA 40 CFR Part 75 regulations. The Portable Gas Analyzer System can test up to 6 gases simultaneously, or swap sensors out for additional ...
by:CMC Solutions, LLC based inFarmington Hills, MICHIGAN (USA)
The SmartCEMS Remote Automated Sample and Calibration, or RASCAL, interfaces with the PEMS or DAHS and performs automatic audits and report generation for PS-16 compliant RAAs. The remote calibrator is used with a portable analyzer to provide a complete automated compliance package minimizing maintenance staff and costs for PEMS QA onsite. ...
Manufactured by:Markes based inBridgend, UNITED KINGDOM
UNITY–ULTRA-xr Pro™ is our highest capacity, automated thermal desorption system for the unattended sampling of up to 199 sample tubes in a single sequence. Its automated re-collection of tube and trap desorption split flows is unique to Markes and provides the most comprehensive re-collection options and enhanced sample security. It is ideal for laboratories needing to rapidly ...
Manufactured by:Cerex Monitoring Solutions, LLC. based inAtlanta, GEORGIA (US) (USA)
Complete insitu solution to monitor critical stack emissions such as Ammonia (NH3), BTEX, Nitrogen Oxides (NOx), and more. Eliminates equipment and maintenance associated with extracting sample from ...
Manufactured by:Markes based inBridgend, UNITED KINGDOM
UNITY–ULTRA-xr™ is an automated thermal desorption system for the rapid and unattended sampling of up to 100 sorbent tubes in a single sequence. Additional options include autosamplers for canister, bag or on-line analysis. The UNITY–ULTRA-xr is the ideal platform for labs requiring the flexibility to expand their capabilities to extended analyte ranges and varied sample types ...
Manufactured by:Markes based inBridgend, UNITED KINGDOM
TD100-xr™ is an automated thermal desorption system for the rapid and unattended processing of up to 100 × 3½-inch sorbent tubes in a single sequence. It’s the perfect thermal desorption unit for high-throughput analytical laboratories needing to process large numbers of tube-based samples ...
Manufactured by:AMETEK Process Instruments based inPittsburgh, PENNSYLVANIA (USA)
The CEM Oxygen (CEM/O2) analyzer is designed to measure net oxygen content in flue gas and process applications, for emissions control, product quality and process efficiency. With a compact footprint for easy integration, the analyzer is designed for use in wet or dry gas continuous emissions monitoring (CEM) systems, particularly in applications where the sample is extracted to a remote ...
Manufactured by:AMETEK Process Instruments based inPittsburgh, PENNSYLVANIA (USA)
WDG-HPII Series analyzers offer unique chimney-effect/convective sampling technology that combines the advantages of insitu probe high-particulate sampling with the high temperature and corrosion resistance of extractive analyzers. With a high-particulate filter and weatherproof sensor enclosure, the analyzer is ideal for measurements of O2, combustibles and methane, and is completely field ...
Manufactured by:Aereon, part of Cimarron group based inLegnano (MI), ITALY
The Certified Ultra-Low Emissions Burner (CEB) is an ultra-low emissions vapor device that utilizes premix surface combustion to effectively combust waste gases in a compact footprint. With VOC destruction efficiencies of up to 99.99% and a NOx emissions guarantee of ≤ 15 ppmv at 3% oxygen, carbon monoxide emissions guarantee of, smokeless operation and no luminous flame, the CEB is the best ...
Manufactured by:Cooper Environmental / Sailbri Cooper Inc. based inTigard, OREGON (USA)
Cooper Environmental’s Xact® 640i is the first Multi-Metals Continuous Emissions Monitor to be proven successful for accurately measuring elemental concentrations in smoke stacks by capturing and measuring both particulate and vapor phase metals. The Xact® 640i system uses reel-to-reel filter tape sampling and nondestructive X-ray fluorescence (XRF) ...