Refine by
Applications
- Chromatography laboratory instrumentation for chemical industry
- Chromatography laboratory instrumentation for food & beverage industry
- Underwater cleaning solutions for industry sector
- Chromatography laboratory instrumentation for pharmaceutical industry
- Leak detection solutions for healthcare industry
- Leak detection solutions for oil & gas industry
- Cardiovascular Care Solutions for Patients
- Wastewater Treatment Systems for Biological Wastewater Treatment
- Leak detection solutions for commercial buildings sector
- Underwater cleaning solutions for pool cleaners industry
- Underwater cleaning solutions for aquaculture industry
- Chromatography laboratory instrumentation for feed industry
- Underwater cleaning solutions for water reservoirs sector
- Underwater cleaning solutions for nuclear power industry
- Air combustion for the petroleum refining industry
- Waste air combustion for municipalities
- Parallel evaporation in environmental consultancy
- Parallel evaporation for the pharmaceutical industry
- Leak detection solutions for data center & environmental monitoring system sector
- Leak detection solutions for industrial sector
- Air combustion for chemical plants
- Spray Drying & Encapsulation for researching
Xprt Equipment Supplied In Libya
874 equipment items found
Showcase
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
The device is used to monitor and record the quality of the SF6 gas in a gas compartment. The following quality parameters can be determined with only one measurement: SF6 volume percentage (%). Moisture concentration (°C atmosphere, °C pressure, °F atmosphere, °F pressure, ppmv, ppmw). SO2-Concentration ...
Showcase
Manufactured by:BUCHI based inFlawil, SWITZERLAND
Pre-incineration unit for ash determination. The Wet Digester B-440 is an ecological pre-incineration unit for ash determination in different sample types. Select from a wide temperature range of up to 600 °C for more flexibility. Improve reproducibility with programmable incineration ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
When a purification has to be scaled up, GlasPure offers maximum flexibility in terms of scale and separation requirements. The glass columns are designed for sample amounts over 300 g and pressure up to 50 bar (725 ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
The preparative version of the Sepmatix 8x HPLC system has an HPLC pump that is equipped with a 100 ml pump head, the max. operating pressure is 400 bar. Flow rates per channel 3.0 to 8.0 ml/ min. For parallel collection of fractions from all 8 channels, the system is additionally equipped with 8 fraction collectors, which are combined in a compact collector module. In the standard version the ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
Sepiatec’s unique Sepbox systems allow samples to be processed automatically, and significantly accelerat the purification process. The Sepbox 2D product line includes the two models 2D-250 and 2D-2000. The Sepbox concept is based on a patented combination of High Performance Liquid Chromatography (HPLC) and Solid Phase Extraction (SPE) reliable and proven techniques that provide a ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
Complementary and robust. If you perform acid hydrolysis as a sample preparation step for total fat determination, discover HydrolEx H-506 as a complementary and robust addition to your FatExtractor E-500 or UniversalExtractor E-800. Benefit from a smooth, safe process with convenient system ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
Four models to best fit your scale-up needs. If you want to scale-up your laboratory process, the Rotavapor® R-220 Pro family will offer you: a wide variety of glass assemblies, high performance systems, the possibility of continuous operations, and an economical model for essential ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
Introducing the Lyovapor™ L-250, featuring our groundbreaking EcoStream™ technology: the most eco-friendly freeze-drying solution for your laboratory. Our innovative cooling technology significantly lowers the environmental impact of the instrument without compromising our commitment to quality and reliability. The L-250 embodies BUCHI’s commitment to enhancing the ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
Sepiatec’s SFC-M5 system is a preparative system for separating chiral and achiral samples using supercritical fluid chromatography. The system is available in the product variants M5 50 and M5 250. The SFC-M5 system consists of the main module and the collector module. Both modules form a functional unit that can be configured in a variety of ways with different equipment. The main module ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
With the simultaneous monitoring at four different wavelengths over the whole UV and visible range, the C-640 Detector allows you to detect and isolate your compounds using the Sepacore Flash Chromatography ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
Best performance at the highest safety. If you want to reach the best performance in industrial distillation and ensure the highest user safety, your solution is the Rotavapor® R-250 Pro. Benefit from optimized distillation rate, intuitive operation, and exceptional product ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
Sepiatec’s new SFC-250 system is a compact benchtop unit designed for preparative separation using supercritical fluid chromatography. Measuring just 72 x 60 x 88 cm (W x D x H) the system offers all advantages of SFC technology such as fast separation, reduced consumption of organic solvents, lower costs, improved environmental compatibility and increased ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
Sepiatec’s SFC-M5 50 system is a preparative system for separating chiral and achiral samples using supercritical fluid chromatography. The SFC-M5 50 system consists of the main module and the collector module. Both modules form a functional unit that can be configured in a variety of ways with different equipment. The main module can be equipped with up to three high pressure pumps, a CO2 ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
The type of sample loading on a flash cartridge or a prep HPLC column has a big impact on the final purification results. With the Pure sample loading portfolio, the chemist has the choice between several convenient ...
Showcase
Manufactured by:Weda Robotics based inSödertälje, SWEDEN
YT-600 is a remote controlled vehicle for sediment (sludge) removal in all sorts of reservoirs'. The powerful on-board submersible pump and wide nozzle allows for efficient cleaning of large bottom surfaces. The sediment is pumped through a hose to a seleceted discharge point or to a filter. Traditional cleaning after draining and then removal of the sediment requires the reservoir to be taken ...
Premium
Manufactured by:BioKube A/S based inTappernoje, DENMARK
No septic tank required in a grey water system. There are very few particles coming to the greywater system. For this reason, you only need a quite small internal chamber to retain particles. In the grey system above left, it is the compartment in the right part of the unit. However, you need to retain hair coming from the shower. Above, you can see the metal filter. The homeowner needs to empty ...
Premium
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
With atmospheric test chambers it is not necessary to evacuate air before the test process. Test chambers of this construction type can be manufactured at significantly lower cost with a significantly larger volume than vacuum chambers. We build these chambers with a chamber volume of up to 50 m³ as standard. This allows for reliable testing of even larger units and ...
Premium
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
Integrated pressure monitoring for leak control. Special features: Complete realisation, ranging from the design to the commissioning. Piping systems can be realized in various materials, e.g. in copper or stainless steel. Integration into existing fabrication hall construction is possible. Use of gastight DILO unions without intermediate seal compound. Production in nominal diameters of up to ...
Premium
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
The handy Mini Series consists of the following individual components which can be assembled as complete ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
The compact Lyovapor™ L-200 offers high-quality Freeze Drying (-55 °C, 6 kg) with a high level of automation. Infinite-Control includes easy method creation, method running, data logging, chart recording in real-time and interruption if needed from anywhere at ...