Refine by
Applications
- Chromatography laboratory instrumentation for chemical industry
- Chromatography laboratory instrumentation for food & beverage industry
- Underwater cleaning solutions for industry sector
- Chromatography laboratory instrumentation for pharmaceutical industry
- Leak detection solutions for healthcare industry
- Leak detection solutions for oil & gas industry
- Cardiovascular Care Solutions for Patients
- Wastewater Treatment Systems for Biological Wastewater Treatment
- Leak detection solutions for commercial buildings sector
- Underwater cleaning solutions for pool cleaners industry
- Underwater cleaning solutions for aquaculture industry
- Chromatography laboratory instrumentation for feed industry
- Underwater cleaning solutions for water reservoirs sector
- Underwater cleaning solutions for nuclear power industry
- Air combustion for the petroleum refining industry
- Waste air combustion for municipalities
- Parallel evaporation in environmental consultancy
- Parallel evaporation for the pharmaceutical industry
- Leak detection solutions for data center & environmental monitoring system sector
- Leak detection solutions for industrial sector
- Air combustion for chemical plants
- Spray Drying & Encapsulation for researching
Xprt Equipment Supplied In Libya
874 equipment items found
Showcase
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
The device is used to monitor and record the quality of the SF6 gas in a gas compartment. The following quality parameters can be determined with only one measurement: SF6 volume percentage (%). Moisture concentration (°C atmosphere, °C pressure, °F atmosphere, °F pressure, ppmv, ppmw). SO2-Concentration ...
Showcase
Manufactured by:Weda Robotics based inSödertälje, SWEDEN
YT-600 is a remote controlled vehicle for sediment (sludge) removal in all sorts of reservoirs'. The powerful on-board submersible pump and wide nozzle allows for efficient cleaning of large bottom surfaces. The sediment is pumped through a hose to a seleceted discharge point or to a filter. Traditional cleaning after draining and then removal of the sediment requires the reservoir to be taken ...
Showcase
Manufactured by:BioKube A/S based inTappernoje, DENMARK
BioKube Jupiter systems are predominantly used for cities, gated communities and resorts. BioKube Jupiter systems are delivered fully equipped ready to be installed as a plug and play unit. Each unit contains a treatment zone with aerated filters and a settling zone to remove all ...
Showcase
Manufactured by:BUCHI based inFlawil, SWITZERLAND
Pre-incineration unit for ash determination. The Wet Digester B-440 is an ecological pre-incineration unit for ash determination in different sample types. Select from a wide temperature range of up to 600 °C for more flexibility. Improve reproducibility with programmable incineration ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
The compact Lyovapor™ L-200 offers high-quality Freeze Drying (-55 °C, 6 kg) with a high level of automation. Infinite-Control includes easy method creation, method running, data logging, chart recording in real-time and interruption if needed from anywhere at ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
Rubber cap for beaker flask 800 ml, 1200 ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
Your first step into controlled separation. When you purify with an open glass column, you might suffer from low resolution and long run times. As your first step into controlled separation, we offer small Sepacore® Easy Purification Systems for control over the flow rate and the eluent ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
Sepiatec’s SFC-M5 system is a preparative system for separating chiral and achiral samples using supercritical fluid chromatography. The system is available in the product variants M5 50 and M5 250. The SFC-M5 system consists of the main module and the collector module. Both modules form a functional unit that can be configured in a variety of ways with different equipment. The main module ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
EX-protection fulfilling highest safety levels. Safety comes first! Especially when it comes to the Rotavapor® R-250 EX! The EX-protection is designed to fulfill the harshest working environment needs. Experience the highest safety level of industrial distillation with a flask size of up to ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
Sepiatec’s SFC-M5 250 system is a preparative system for separating chiral and achiral samples using supercritical fluid chromatography. The SFC-M5 250 system consists of the main module and the collector module. Both modules form a functional unit that can be configured in a variety of ways with different equipment. The main module can be equipped with up to three high pressure pumps, a ...
Premium
Manufactured by:BioKube A/S based inTappernoje, DENMARK
BioKube’s Mars systems are small STP plants most commonly used for single households or smaller residential groups producing up to 30 m³ wastewater a day. The Mars 3000 system is typically in-stalled after a septic tank either in-or above ...
Premium
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
The mixing unit has been specially developed for the handling of gas mixtures based on C4-FN and their specific requirements. A total of four gas components can be mixed. The gas mixture is circulated by the compressor to generate a homogenous mixture. Using the integrated compressor, the generated gas mixture can be filled directly into gas compartments or for transportation, stored into ...
Premium
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
The test pressure for gas analysis in medium voltage switchgear is often too low. For this reason the compressor unit is needed to compress the gas to be measured so that there is sufficient pressure for the gas measuring devices connected downstream from the compressor unit. As the device is leak-tested there are no SF6 emissions. The oilfree compression avoids the SF6 test gas from being ...
Premium
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
Service carts for small gas compartments The service carts of the Mini Series for liquid gas storage meet all requirements for efficient gas handling in the medium voltage range and thus, allow gas recovery down to < 5 mbar. Equipped with the well-proven DILO components these service carts enable the recovery, filling and purification of SF6 gas as well as the evacuation of small gas ...
Premium
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
Water-cooled heat exchanger. Cooling in continuous operation. Circulation pump for water cooling: 30 m³/min. Gas purification via particle filter (pore size 1 µm). Cooling capacity: ~ 45 kW. Operation via touch panel. Optional oilfree compressor 11.4 m³/h with 30 l dry filter for gas ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
When a purification has to be scaled up, GlasPure offers maximum flexibility in terms of scale and separation requirements. The glass columns are designed for sample amounts over 300 g and pressure up to 50 bar (725 ...
Premium
Manufactured by:BioKube A/S based inTappernoje, DENMARK
Orion systems are larger STP plants de-signed for placement on a concrete casted floor, with on-site casted con-crete support walls, most commonly used for treating wastewater from vil-lages, factories and resorts with daily water amount of more than 100 ...
Premium
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
The MINI SERIES C4/C5 is perfectly suited for efficient gas handling of small gas compartments and gas recovery down to < 5 mbar. It is specially designed for the handling of gas mixtures based on 3M Novec 4710 or 3M Novec 5110. The working pressures allow gaseous storage in order to prevent demixing. Thus, filling of the gas mixture from the gas compartment into a transport cylinder as well ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
Quick and compliant. The FatExtractor E-500 is designed for quick and compliant fat extraction. Readily adapt your FatExtractor E-500 to changing needs with the interchangeable glass assembly and execute extractions according to Soxhlet, Randall or ...