Refine by
Applications
- Chromatography laboratory instrumentation for chemical industry
- Chromatography laboratory instrumentation for food & beverage industry
- Underwater cleaning solutions for industry sector
- Chromatography laboratory instrumentation for pharmaceutical industry
- Leak detection solutions for healthcare industry
- Leak detection solutions for oil & gas industry
- Cardiovascular Care Solutions for Patients
- Wastewater Treatment Systems for Biological Wastewater Treatment
- Leak detection solutions for commercial buildings sector
- Underwater cleaning solutions for pool cleaners industry
- Underwater cleaning solutions for aquaculture industry
- Chromatography laboratory instrumentation for feed industry
- Underwater cleaning solutions for water reservoirs sector
- Underwater cleaning solutions for nuclear power industry
- Air combustion for the petroleum refining industry
- Waste air combustion for municipalities
- Parallel evaporation in environmental consultancy
- Parallel evaporation for the pharmaceutical industry
- Leak detection solutions for data center & environmental monitoring system sector
- Leak detection solutions for industrial sector
- Air combustion for chemical plants
- Spray Drying & Encapsulation for researching
Xprt Equipment Supplied In Libya
874 equipment items found
Showcase
Manufactured by:Weda Robotics based inSödertälje, SWEDEN
YT-600 is a remote controlled vehicle for sediment (sludge) removal in all sorts of reservoirs'. The powerful on-board submersible pump and wide nozzle allows for efficient cleaning of large bottom surfaces. The sediment is pumped through a hose to a seleceted discharge point or to a filter. Traditional cleaning after draining and then removal of the sediment requires the reservoir to be taken ...
Showcase
Manufactured by:BUCHI based inFlawil, SWITZERLAND
Pre-incineration unit for ash determination. The Wet Digester B-440 is an ecological pre-incineration unit for ash determination in different sample types. Select from a wide temperature range of up to 600 °C for more flexibility. Improve reproducibility with programmable incineration ...
Showcase
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
The device is used to monitor and record the quality of the SF6 gas in a gas compartment. The following quality parameters can be determined with only one measurement: SF6 volume percentage (%). Moisture concentration (°C atmosphere, °C pressure, °F atmosphere, °F pressure, ppmv, ppmw). SO2-Concentration ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
The next generation laboratory spray dryer. With the Mini Spray Dryer S-300, BUCHI solidifies its position as a global market leader for more than 40 years. The laboratory spray dryer combines outstanding product design with unique instrument capabilities to offer a superior user ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
Four steps for occupational safety. With four steps to occupational safety, Scrubber K-415 provides you with maximal protection. The unit neutralizes poisonous fumes and reaction gases and minimizes use of cooling water to safeguard both you and the ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
With Infinite-Technology™ the Lyovapor™ L-300 offers continuous sublimation for the first time with two alternately working and automatically hygienically cleansed condensers at -105 °C. In addition, Infinite-Control™ allows entire process control of all relevant parameters, also via mobile devices. ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
The efficient way of cooling: The efficient way of cooling during evaporation, extraction or Kjeldahl comes courtesy of the Recirculating Chiller F-305 / F-308 / F-314. Combine with the Rotavapor® R-300 to gain more automation, more accuracy and more energy and time ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
First lab Freeze Dryer for continuous sublimation. With Infinite-Technology, the Lyovapor™ L-300 is the first lab freeze dryer for continuous sublimation thanks to two alternately working condensers that are automatically cleaned. In addition, control the entire process remotely via mobile devices. ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
Providing stable spray drying conditions. The Dehumidifier S-396 is designed to provide dry air or to enable continuous work with water and organic solvent mixtures. The accessory improves your spray drying performance, while providing stable spray drying ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
Sepiatec’s SFC-M5 system is a preparative system for separating chiral and achiral samples using supercritical fluid chromatography. The system is available in the product variants M5 50 and M5 250. The SFC-M5 system consists of the main module and the collector module. Both modules form a functional unit that can be configured in a variety of ways with different equipment. The main module ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
Powerful and flexible purification solutions. The Sepacore flash systems X10 / X50 are powerful and flexible purification solutions for organic compounds, crude synthesis mixtures and plant extracts. The system offers scale-up capabilities for purifications that are tailored to your ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
Introducing the Lyovapor™ L-250, featuring our groundbreaking EcoStream™ technology: the most eco-friendly freeze-drying solution for your laboratory. Our innovative cooling technology significantly lowers the environmental impact of the instrument without compromising our commitment to quality and reliability. The L-250 embodies BUCHI’s commitment to enhancing the ...
Premium
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
For determination of moisture Moisture is the most important criteria for the determination of the gas quality. This device has been designed specially for SF6 moisture measurements. It also shows a higher resistance against contamination and SF6 decomposition products than conventional moisture sensors and even minimises the usual long-time drifting. The integrated electronic flow meter supports ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
Introducing the Lyovapor™ L-210, equipped with our cutting-edge EcoStream™ and Infinite-Control™ technologies. The timesaving Lyovapor™ L-210 sets new efficiency standards while maintaining exceptional, reliable, and stable cooling performance. Designed with advanced automation and flexibility, the Lyovapor™ line not only reduces drying time but also minimizes ...
Premium
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
B152R41 / B152R41S15: Mass flow measuring system with an additional resettable, adding and subtracting counter. B152R51: Mass flow measuring system ( battery-operated with charge indicator). Battery operation enables an application independent of the power supply. With this device, gas monitoring is just that simple. Gas quantities which are filled in and recovered are registered and can be ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
Meet the R-80, our most energy-efficient Rotavapor® to date and the most compact Rotavapor® on the market. The R-80 is an affordable and eco-friendly solution that ensures the most efficient use of lab space while meeting BUCHI’s high-quality standards. ...
Premium
Manufactured by:BioKube A/S based inTappernoje, DENMARK
BioKube offers a system in concrete one-unit tank. As shown in the pictures below, the one-unit system is naturally a good deal ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
All that is essential for process control. Closely monitoring basic parameters such as moisture, fat or protein is crucial to correct deviations in manufacturing processes. The X-Sential™ has been developed and designed as the most cost-efficient, fit-for-purpose process ...
Premium
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
The unique combination of mass flow meter and fi lling device facilitates the SF6 gas monitoring considerably. This device does not only enable the registration of the quantities filled in, but allows the automatic filling of a gas compartment at the same time. Thus the operator can select the indication of the gas quantity required or the preset filling value. After having pressed the start key, ...
Premium
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
The electronic bottle scales allow quick and easy determination of the filling quantity of a gas bottle. The large weighing platform and the supporting chain provide additional stability of the gas bottle. The weight is indicated on the illuminated display which switches off automatically if the scales are not used for a certain time. Thanks to the tare function gas inputs and outputs can be ...