Refine by
Applications
- Chromatography laboratory instrumentation for chemical industry
- Chromatography laboratory instrumentation for food & beverage industry
- Underwater cleaning solutions for industry sector
- Chromatography laboratory instrumentation for pharmaceutical industry
- Leak detection solutions for healthcare industry
- Leak detection solutions for oil & gas industry
- Cardiovascular Care Solutions for Patients
- Wastewater Treatment Systems for Biological Wastewater Treatment
- Leak detection solutions for commercial buildings sector
- Underwater cleaning solutions for pool cleaners industry
- Underwater cleaning solutions for aquaculture industry
- Chromatography laboratory instrumentation for feed industry
- Underwater cleaning solutions for water reservoirs sector
- Underwater cleaning solutions for nuclear power industry
- Air combustion for the petroleum refining industry
- Waste air combustion for municipalities
- Parallel evaporation in environmental consultancy
- Parallel evaporation for the pharmaceutical industry
- Leak detection solutions for data center & environmental monitoring system sector
- Leak detection solutions for industrial sector
- Air combustion for chemical plants
- Spray Drying & Encapsulation for researching
Xprt Equipment Supplied In Libya
874 equipment items found
Showcase
Manufactured by:BUCHI based inFlawil, SWITZERLAND
Pre-incineration unit for ash determination. The Wet Digester B-440 is an ecological pre-incineration unit for ash determination in different sample types. Select from a wide temperature range of up to 600 °C for more flexibility. Improve reproducibility with programmable incineration ...
Showcase
Manufactured by:Weda Robotics based inSödertälje, SWEDEN
YT-600 is a remote controlled vehicle for sediment (sludge) removal in all sorts of reservoirs'. The powerful on-board submersible pump and wide nozzle allows for efficient cleaning of large bottom surfaces. The sediment is pumped through a hose to a seleceted discharge point or to a filter. Traditional cleaning after draining and then removal of the sediment requires the reservoir to be taken ...
Showcase
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
The device is used to monitor and record the quality of the SF6 gas in a gas compartment. The following quality parameters can be determined with only one measurement: SF6 volume percentage (%). Moisture concentration (°C atmosphere, °C pressure, °F atmosphere, °F pressure, ppmv, ppmw). SO2-Concentration ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
With the simultaneous monitoring at four different wavelengths over the whole UV and visible range, the C-640 Detector allows you to detect and isolate your compounds using the Sepacore Flash Chromatography ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
Sepiatec’s SFC-M5 250 system is a preparative system for separating chiral and achiral samples using supercritical fluid chromatography. The SFC-M5 250 system consists of the main module and the collector module. Both modules form a functional unit that can be configured in a variety of ways with different equipment. The main module can be equipped with up to three high pressure pumps, a ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
Set new standards for digestion speed, flexible use and result reproducibility with the IR SpeedDigester. Achieve higher sample throughput for nitrogen determination by Kjeldahl digestion and multiply functionality with this entry level IR ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
Meet the R-80, our most energy-efficient Rotavapor® to date and the most compact Rotavapor® on the market. The R-80 is an affordable and eco-friendly solution that ensures the most efficient use of lab space while meeting BUCHI’s high-quality standards. ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
Introducing the Lyovapor™ L-210, equipped with our cutting-edge EcoStream™ and Infinite-Control™ technologies. The timesaving Lyovapor™ L-210 sets new efficiency standards while maintaining exceptional, reliable, and stable cooling performance. Designed with advanced automation and flexibility, the Lyovapor™ line not only reduces drying time but also minimizes ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
Maximal efficiency with up to 10 measurement points in parallel. Continuously monitor key parameters such as moisture, protein, fat, ash, starch, fiber, oil at any process step with NIR-Online Multipoint Sensor. Innovative Multipoint heads provide maximal efficiency for up to ten measurement points in parallel ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
Rubber cap for beaker flask 800 ml, 1200 ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
Sepiatec’s SFC-M5 50 system is a preparative system for separating chiral and achiral samples using supercritical fluid chromatography. The SFC-M5 50 system consists of the main module and the collector module. Both modules form a functional unit that can be configured in a variety of ways with different equipment. The main module can be equipped with up to three high pressure pumps, a CO2 ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
Rubber adapter for manifold valve SJ 29/32 12 ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
Your first step into controlled separation. When you purify with an open glass column, you might suffer from low resolution and long run times. As your first step into controlled separation, we offer small Sepacore® Easy Purification Systems for control over the flow rate and the eluent ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
All that is essential for process control. Closely monitoring basic parameters such as moisture, fat or protein is crucial to correct deviations in manufacturing processes. The X-Sential™ has been developed and designed as the most cost-efficient, fit-for-purpose process ...
Premium
Manufactured by:Weda Robotics based inSödertälje, SWEDEN
For cleaning water reservoirs and water towers. Traditional cleaning processes meant that water towers and drinking-water reservoirs had to be emptied and manually cleaned or divers sent down. In both options, the reservoir has to be taken offline, which can lead to major disruptions in the main supply system. Emptying a reservoir is time consuming and cleaning is labor intensive. Sending divers ...
Premium
Manufactured by:BioKube A/S based inTappernoje, DENMARK
A sludge truck will be the preferred solution for small to medium size systems. With the sludge truck, the sludge is transported to another location where it is processed. The treatment process here will typically be a large wastewater treatment system, a local dewatering system or a root zone system. For up to 10 m3 / day systems, the desludging will take place once a year. For larger ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
Sepiatec’s new SFC-250 system is a compact benchtop unit designed for preparative separation using supercritical fluid chromatography. Measuring just 72 x 60 x 88 cm (W x D x H) the system offers all advantages of SFC technology such as fast separation, reduced consumption of organic solvents, lower costs, improved environmental compatibility and increased ...
Premium
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
For safe refilling of SF6 gas into gas compartments by overpressure The handy device allows filling of electrical equipment with SF6 gas directly from the cylinder by overpressure. The primary gauge of the pressure reducer displays the cylinder pressure in bar, psi and kPa. The secondary gauge indicates the desired filling pressure to be set easily by means of the handle. The cylinder pressure ...