Refine by
Aereon Xprt Equipment Supplied In Libya
53 equipment items found
Manufactured by:Aereon, part of Cimarron group based inLegnano (MI), ITALY
The Momentum Biogas series of elevated flares is our most economical line of combustion equipment for the biogas sector, offering a cost-effective solution with rapid delivery. Momentum flares utilize a specially designed “burner and shroud” system to manage the intricate mixing with ambient air to provide a high DRE (98%) and high turndown ratio in a simple, yet effective, product. ...
Manufactured by:Aereon, part of Cimarron group based inLegnano (MI), ITALY
AEREON's Inferno Series Gas-assisted flares are flares that use an additional source of high pressure gas at the flare tip to mix with the waste gas and create additional turbulence to ensure adequate mixing with air, which in turn provides for smokeless combustion. The waste gas is further distributed at the flare tip through AEREON's proprietary Starfire burner, optimizing gas and air mixing. ...
Manufactured by:Aereon, part of Cimarron group based inLegnano (MI), ITALY
The new Model Duraspark 1000 Heavy Duty Pilot was developed specifically for the rigors of the oil-patch, providing additional layers of protection and heat shielding of critical components. The transformer box has also been placed at grade (vs. near the flare tip) reducing heat stress of these critical components. Available with retractable packages, the DuraSpark 1000 will improve system ...
Manufactured by:Aereon, part of Cimarron group based inLegnano (MI), ITALY
AEREON's Catalytic Thermal Oxidizers/Catalytic Incinerators are designed to destruct hazarous air pollutants and volatile organic compounds in an effective manner. Basic design utilizes a catalyst to promote oxidation of the compounds and destruction is achieved at a lot lower temperature (600° F - 800° F) than a direct thermal oxidizer (1400° F - 1800° F). Destruction ...
Manufactured by:Aereon, part of Cimarron group based inLegnano (MI), ITALY
Utility flares (DU series) are one of the most common flare designs use for applications with no smokeless burning requirements. They are also utilized in applications where smokeless flaring can be achieved without the use of an additional assist ...
Manufactured by:Aereon, part of Cimarron group based inLegnano (MI), ITALY
The Model 850 Pilot is a time-proven product that combines electric spark ignition with continuous spark monitoring, thermocouple monitoring, and retractability. The combination of these highly-demanded features has made the high-alloy, stainless steel Model 850 Pilot one of the most well-received ignition systems on the market. This electric pilot provides a rapid, direct spark every 10 to 20 ...
Manufactured by:Aereon, part of Cimarron group based inLegnano (MI), ITALY
Flame front generators are effective, time proven ignition systems which have been widely used in flaring applications for decades. The inherent reliability, rugged construction, ease of operation, and its economic advantages have allowed the flame front generator (FFG) to remain one of the most popular forms of pilot ignition in the industry. The FFG is easily adaptable to any pilot system which ...
Manufactured by:Aereon, part of Cimarron group based inLegnano (MI), ITALY
All our Pilot Burners are fuel efficient pilots, self inspirated type, characterized by their durability, reliability, and ease of installation (retractable). Available models are ignited via FFG - flame front generator system (model 245), or HEI - high energy Ignition System HEI (model 250) or combined FFG and HEI (model 255). They can be retractable from ground level (model 270 retrax), and ...
Manufactured by:Aereon, part of Cimarron group based inLegnano (MI), ITALY
The dynamic (velocity) seal is a simple innovation which ensures significant cost savings over time. The reverse conical baffle design reduces flow area in the flare tip while simultaneously increasing purge gas velocity. In combination with the dynamic seal, a constant flow of purge gas will maintain a seal in flare system, ensuring that air infiltration does not occur. A vortex effect is ...
Manufactured by:Aereon, part of Cimarron group based inLegnano (MI), ITALY
Whenever a process requires that entrained droplets be removed from a vapor stream, a knockout drum should be integrated into the system. Condensation can occur when hot process gases cool considerably in the flare gas header and riser, and some gases also go to dew point at ambient temperatures and pressures and can therefore generate liquids. These droplets must be removed in order to avoid the ...
Manufactured by:Aereon, part of Cimarron group based inLegnano (MI), ITALY
The liquid seal drum is a specially designed vessel containing a predetermined level of water in the base of the drum. The main purpose of the liquid seal drum is to stop flame propagation in the unlikely event of flashback. The liquid seal also acts as a large check valve so that gas can not travel upstream for any reason. A third function of the liquid seal is to disentrain liquid droplets. ...
Manufactured by:Aereon, part of Cimarron group based inLegnano (MI), ITALY
We design Knockout Drums (KO Drums) in both horizontal and vertical configurations, as gas-liquid separators with high efficiency of separation of liquid droplets, with maximum size in the range 300-600 microns. We also supply Liquid Seal Drums, including all accessories: anti-pulsation device, siphon, level control, liquid make-up, and instrumentation. These systems are designed for the ...
Manufactured by:Aereon, part of Cimarron group based inLegnano (MI), ITALY
We design and supply Multipoint Ground Flares (MPGF) when very large flows are required to be flared in an array enclosed configuration. This system is characterized by multiple stages, with first stage(s) provided with assist support such as gas, air, steam for high smokeless performance at low regimes, and the upper stages coming into operation depending on the header pressure and the flaring ...
Manufactured by:Aereon, part of Cimarron group based inLegnano (MI), ITALY
The Model 250 Energex Pilot is a high alloy, stainless steel pilot which combines a high voltage electronic excitor and a high energy spark rod to provide rapid, reliable ignition. More importantly, the Energex pilot provides instantaneous re-ignition if the pilot should ever lose its flame. This pilot system uses a fuel gas line much like other standard pilots, however instead of a flame front ...
Manufactured by:Aereon, part of Cimarron group based inLegnano (MI), ITALY
The Model 270 RETRAX is a high-tech, retractable, electronic pilot which meets the technical requirements of our clients. This advanced design allows the plant operators to lower the RETRAX pilots individually or all at once for ease of maintenance. Since the RETRAX can be lowered from grade, operators need not wait for a plant shut down to service the pilots. The Model 270 RETRAX allows ...
Manufactured by:Aereon, part of Cimarron group based inLegnano (MI), ITALY
AEREON's recuperative thermal oxidizers are complex incineration systems that are designed to destroy volatile organic compounds (VOCs) and hazardous air pollutants that are emitted from various processes. These oxidizers include heat recovery modules to preheat combustion air and incoming waste process streams to minimize fuel consumption for economical operation. Primary advantage of the unit ...
Manufactured by:Aereon, part of Cimarron group based inLegnano (MI), ITALY
Hydrogen sulfide or H2S is a lethal gas generated in refineries, petrochemical plants, and gas handling facilities. Sulfur recovery units produce tail gases that contain relatively substantial amounts of H2S. AEREON designs a special type of incinerator, designed to eliminate the H2S components, while inhibiting the creation of corrosive acid by-products. Systems of this nature typically include ...
Manufactured by:Aereon, part of Cimarron group based inLegnano (MI), ITALY
With the roll out of Quad O regulations in the USA, crude/condensate tank batteries and well pads are required to conform to reduced emission levels if they have the potential to emit over 6 tons of VOC per annum. One of the three emission control end-of-line devices can be used: Flares, Enclosed Combustors or VRUs. When enclosed flames and smokeless combustion are required for low pressure tank ...
Manufactured by:Aereon, part of Cimarron group based inLegnano (MI), ITALY
AEREON's Momentum Series of non-assist flares provide smokeless performance without the need of additional air-blowers or assist gas for both high pressure and low pressure gas streams. Leveraging the increased momentum of gas that is passed through a simple nozzle or restricted opening, the waste gas intimately mixes with the ambient air and provides for smokeless operation while meeting all ...
Manufactured by:Aereon, part of Cimarron group based inLegnano (MI), ITALY
Hydrocarbon vapors may be destroyed in a flare, combustor or a thermal oxidizer. For many applications, a simple vapor combustor can be successfully used as a safe and economical method of controlling vapors from the handling, storage, or loading of volatile liquid hydrocarbons or other compounds when recovery of the vapors is not a viable ...