Refine by
Applications
- Chromatography laboratory instrumentation for chemical industry
- Chromatography laboratory instrumentation for food & beverage industry
- Underwater cleaning solutions for industry sector
- Chromatography laboratory instrumentation for pharmaceutical industry
- Leak detection solutions for healthcare industry
- Leak detection solutions for oil & gas industry
- Cardiovascular Care Solutions for Patients
- Wastewater Treatment Systems for Biological Wastewater Treatment
- Leak detection solutions for commercial buildings sector
- Underwater cleaning solutions for pool cleaners industry
- Underwater cleaning solutions for aquaculture industry
- Chromatography laboratory instrumentation for feed industry
- Underwater cleaning solutions for water reservoirs sector
- Underwater cleaning solutions for nuclear power industry
- Air combustion for the petroleum refining industry
- Waste air combustion for municipalities
- Parallel evaporation in environmental consultancy
- Parallel evaporation for the pharmaceutical industry
- Leak detection solutions for data center & environmental monitoring system sector
- Leak detection solutions for industrial sector
- Air combustion for chemical plants
- Spray Drying & Encapsulation for researching
Xprt Equipment Supplied In Libya
874 equipment items found
Showcase
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
The device is used to monitor and record the quality of the SF6 gas in a gas compartment. The following quality parameters can be determined with only one measurement: SF6 volume percentage (%). Moisture concentration (°C atmosphere, °C pressure, °F atmosphere, °F pressure, ppmv, ppmw). SO2-Concentration ...
Showcase
Manufactured by:BioKube A/S based inTappernoje, DENMARK
BioKube Jupiter systems are predominantly used for cities, gated communities and resorts. BioKube Jupiter systems are delivered fully equipped ready to be installed as a plug and play unit. Each unit contains a treatment zone with aerated filters and a settling zone to remove all ...
Showcase
Manufactured by:Weda Robotics based inSödertälje, SWEDEN
YT-600 is a remote controlled vehicle for sediment (sludge) removal in all sorts of reservoirs'. The powerful on-board submersible pump and wide nozzle allows for efficient cleaning of large bottom surfaces. The sediment is pumped through a hose to a seleceted discharge point or to a filter. Traditional cleaning after draining and then removal of the sediment requires the reservoir to be taken ...
Showcase
Manufactured by:BUCHI based inFlawil, SWITZERLAND
Pre-incineration unit for ash determination. The Wet Digester B-440 is an ecological pre-incineration unit for ash determination in different sample types. Select from a wide temperature range of up to 600 °C for more flexibility. Improve reproducibility with programmable incineration ...
Showcase
Manufactured by:BUCHI based inFlawil, SWITZERLAND
The next generation laboratory spray dryer. With the Mini Spray Dryer S-300, BUCHI solidifies its position as a global market leader for more than 40 years. The laboratory spray dryer combines outstanding product design with unique instrument capabilities to offer a superior user ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
The efficient way of cooling. BUCHI recirculating chiller versions with different performance options for your personal needs available. Remote controlled cooling allows easy operation. Very efficient distillation thanks to the complete integration of the cooling device in the evaporation ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
First lab Freeze Dryer for continuous sublimation. With Infinite-Technology, the Lyovapor™ L-300 is the first lab freeze dryer for continuous sublimation thanks to two alternately working condensers that are automatically cleaned. In addition, control the entire process remotely via mobile devices. ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
Sepiatec’s SFC-M5 50 system is a preparative system for separating chiral and achiral samples using supercritical fluid chromatography. The SFC-M5 50 system consists of the main module and the collector module. Both modules form a functional unit that can be configured in a variety of ways with different equipment. The main module can be equipped with up to three high pressure pumps, a CO2 ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
Rubber adapter for manifold valve SJ 29/32 12 ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
EX-protection fulfilling highest safety levels. Safety comes first! Especially when it comes to the Rotavapor® R-250 EX! The EX-protection is designed to fulfill the harshest working environment needs. Experience the highest safety level of industrial distillation with a flask size of up to ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
Introducing the Lyovapor™ L-210, equipped with our cutting-edge EcoStream™ and Infinite-Control™ technologies. The timesaving Lyovapor™ L-210 sets new efficiency standards while maintaining exceptional, reliable, and stable cooling performance. Designed with advanced automation and flexibility, the Lyovapor™ line not only reduces drying time but also minimizes ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
Beaker flask 100 ml with rubber cap for direct connection to manifold valves including filter paper (75 μm, 100 pcs.) and O-ring (2 ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
The Sepmatix SFC 8x parallel system combines Sepiatec’s proven parallel HPLC technology with the advantages of supercritical fluid chromatography. The result is the first SFC system with eight separating columns working in parallel, high operating speed and as yet unmatched performance. In a space of only a few minutes for example enantiomers can be separated on eight different chiral ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
Complementary and robust. If you perform acid hydrolysis as a sample preparation step for total fat determination, discover HydrolEx H-506 as a complementary and robust addition to your FatExtractor E-500 or UniversalExtractor E-800. Benefit from a smooth, safe process with convenient system ...
Premium
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
For adsorption of moisture, solid and gaseous decomposition ...
Premium
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
For determination of moisture Moisture is the most important criteria for the determination of the gas quality. This device has been designed specially for SF6 moisture measurements. It also shows a higher resistance against contamination and SF6 decomposition products than conventional moisture sensors and even minimises the usual long-time drifting. The integrated electronic flow meter supports ...
Premium
Manufactured by:Weda Robotics based inSödertälje, SWEDEN
For cleaning water reservoirs and water towers. Traditional cleaning processes meant that water towers and drinking-water reservoirs had to be emptied and manually cleaned or divers sent down. In both options, the reservoir has to be taken offline, which can lead to major disruptions in the main supply system. Emptying a reservoir is time consuming and cleaning is labor intensive. Sending divers ...
Premium
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
SF6 gas handling plant for an SF6 pressure turbulence channel with remote control for local operation. The plant serves for evacuation, gas recovery, and filling of a large volume wind ...
Premium
Manufactured by:BioKube A/S based inTappernoje, DENMARK
BioKube Venus and Pluto systems are designed for wastewater from 5 - 30 PE. Venus and Pluto systems will typically be used for individual houses, or up to 6 houses close to each other, or small hotels & Bed and Breakfast sites. Venus and Pluto systems are installed after a septic tank. The systems are pre-fabricated solutions, delivered to the customer ready to install as Plug & Play and ...
Premium
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
The MINI SERIES C4 is perfectly suited for efficient gas handling of small gas compartments and gas recovery down to < 5 mbar. It is specially provided for the handling of gas mixtures (Alternative Insulating Gases). The handy individual MINI components for recovery, consisting of a compressor and a vacuum compressor, are connected to the unit via wire-braided ...