Show results for
Refine by
Sample Heating Equipment Supplied In Lithuania
19 equipment items found
Manufactured by:Protea Limited based inMiddlewich, UNITED KINGDOM
Fixed or mobile sample probes, stainless steel or PTFE lined, Protea is able to provide a solution to measurement from any sample point. With integrated sample filters of ceramic, PTFE, or microfiber construction these probes ensure that the sample passing to the analytical equipment is of sufficient quality to enable long life of ...
Manufactured by:Protea Limited based inMiddlewich, UNITED KINGDOM
Protea supplies heated sample lines of lengths 1m to 50m for the sampling of gaseous samples where sample temperature control is imperative. With dedicated integrated calibration lines and robust end fittings, these lines are suitable for fixed or mobile applications. Protea also supplies ATEX approved ...
Manufactured by:Protea Limited based inMiddlewich, UNITED KINGDOM
The HP5 heated sampling probe is ideal for the determination of particulate matter and chemicals in the gas phase.Its unique design, combined with the clamps-free slide and lock device, allows the probe to freely rotate around its axis, which is needed for the swirl angle determination in accordance with the EN16911 and US EPA M1/2 – this also allows it to ...
Manufactured by:Protea Limited based inMiddlewich, UNITED KINGDOM
Protea’s in-house Temperature Control Unit (TCU) has been designed to allow simple use of heated sample lines and heated sample probes with Protea’s range of gas analyser. The controller unit contains PID control for accurate set-point of heated sampling equipment, such as at ...
Manufactured by:Protea Limited based inMiddlewich, UNITED KINGDOM
For heated gas sampling from up to 4 separate sample points, Protea’s Heated Stream Selection Module (HSSM) is a ready to use 19" rack interface that can be used with Protea’s range of multigas FTIR analysers or any other industrial gas ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
The next generation laboratory spray dryer. With the Mini Spray Dryer S-300, BUCHI solidifies its position as a global market leader for more than 40 years. The laboratory spray dryer combines outstanding product design with unique instrument capabilities to offer a superior user ...
Premium
Manufactured by:Analytik Jena - Lab-loving people based inJena, GERMANY
The CyBio system for heating and orbital mixing of reagents is the fully automated solution for incubating and denaturation of substances in the temperature range from ambient to 99 °C. An optimum heat transfer is realized through specific plate adapters, furthermore the Edge Locking Mechanism (ELM) guarantees the repeatable and accurate positioning of ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
The multipurpose solution for small samples: Introducing the Glass Oven G-300, BUCHI’s all-in-one instrument for small samples. With interchangeable accessories, the Glass Oven G-300 can perform distillation, drying, sublimation, and freeze-drying, eliminating the need for multiple large instruments. Its compact size even allows placement in a glovebox, ensuring the safe handling of ...
Premium
Manufactured by:Lumex Instruments based inMission, BRITISH COLUMBIA (CANADA)
Mercury from the flue gas sample is collected at sorbent traps using a calibrated pumping system and heated sample probe. The material in these traps is later analyzed using Zeeman mercury ...
Premium
Manufactured by:Lumex Instruments based inMission, BRITISH COLUMBIA (CANADA)
Mercury Monitoring Toolkit is designed for efficient and cost-effective on-site determination of total and speciated mercury emissions with flue gases using sorbent trap method. The method has been widely used in power generation, cement production, metallurgy, waste incineration, ...
Manufactured by:Protea Limited based inMiddlewich, UNITED KINGDOM
As a 19” rack analyser it can be provided in a complete fixed emissions system from Protea, or can be used as a standalone analyser. With quick measurement time and a complete heated sample path at 300°C, the atmsoFID can also operate as a process control, indoor VOC detector or automotive emissions ...
Manufactured by:Protea Limited based inMiddlewich, UNITED KINGDOM
Self-contained sampling control for use with Protea core gas analysers. The control of the gas sample in any analysis system is critical. From heated sample lines and probes to pump control, the management of the system is important to stop any damage to analytical hardware. For this reason, Protea supplies the ...
Manufactured by:Cole-Parmer based inVernon Hills, ILLINOIS (USA)
Jenway offers three fluorimeter models to cover a wide range of applications and fluorscence measurements. The 6280 fluorimeter model is ideal for the most sensitive determinations with emission wavelengths up to 650nm. When higher emission wavelengths are required the 6285 fluorimeter with its red-enhanced detector is the unit of choice. For less sensitive applications and a broader wavelength ...
Manufactured by:Sartorius AG based inGoettingen, GERMANY
With microwave drying, the LMA200 moisture meter produces results up to 300 x faster than a drying oven for samples with high moisture content. The built-in analytical balance ensures high precision in moisture ...
Manufactured by:ION Science Ltd. based inRoyston, UNITED KINGDOM
The fixed benzene specific gas detector is wall-mounted with a dynamic detection range or 0 – 20 ppm with 0.1 ppm sensitivity to benzene. Titan samples gas from the environment once per minute and within just 60 seconds an accurate benzene measurement is displayed. The Titan fixed benzene specific gas monitor provides an immediate warning alarm system with two operator configurable levels, ...
Manufactured by:Protea Limited based inMiddlewich, UNITED KINGDOM
The CP5 is a modern version of the classic unheated cold sample probe for the isokinetic sampling of particulate matter in stack emissions. The CP5 design and construction follow the philosophy of being easy and practical to use on the stack. The CP5 is fully realized in AISI316 and is supplied including the AISI316 inner tube, thermocouple and Pitot Type "S" ...
Manufactured by:Elvatech Ltd. based inKyiv, UKRAINE
PmX-5050 is a fully stand-alone device for continuous analysis of particulate matter (PM) elemental composition, intended for online elemental analysis of heavy metals in the ambient air. Particulate matter’s presence in the air and its overall accumulation in the environment are the subjects of growing public concern, especially in the manufacturing facilities, plants, and factories ...
Manufactured by:Servomex - a Spectris Company based inSugar Land, TEXAS (USA)
Leading-edge, safety-enhanced oxygen analysis for hazardous or challenging applications. The award-winning Oxy 1900 sets the standard for O2 gas analysis, delivering a feature-rich solution designed to meet the monitoring needs of even the most challenging applications. At the heart of the Oxy 1900 is Servomex patent Paramagnetic oxygen sensor. Providing highly reliable, accurate and stable ...
Manufactured by:Protea Limited based inMiddlewich, UNITED KINGDOM
Protea P300 is an infra-red (IR), extractive multi component analyser to provide analysis of up to six gas-phase or liquid process ...