- Home
- madagascar
- Equipment
Refine by
Xprt Equipment Supplied In Madagascar
376 equipment items found
Manufactured by:Royal Eijkelkamp based inGiesbeek, NETHERLANDS
Connect your sensors, like a water level logger and water quality probe, to our new GDT-S Prime Plus and transmit sensor data to anywhere in the world. Our GDT-S Prime Plus modem is designed for extended use in the field and to send water level, temperature, conductivity, rainfall, soil moisture and various water quality data in a secure ...
Manufactured by:Royal Eijkelkamp based inGiesbeek, NETHERLANDS
Seismic CPT is performed by pausing at regular intervals throughout the CPT and generating seismic waveforms at the surface. These waveforms are detected by a seismic module behind the CPT cone. The seismic module houses a tri-axial accelerometer that can be used with either a 10 cm2 or a 15 cm2 cone to perform seismic cone penetration ...
Manufactured by:Royal Eijkelkamp based inGiesbeek, NETHERLANDS
This sampler is used to measure bed-load of coarse sand and fine gravel in rivers and other water- ...
Manufactured by:Royal Eijkelkamp based inGiesbeek, NETHERLANDS
The Aardvark permeameter is a fully automated constant-head borehole permeameter to measure soil hydraulic conductivity (Ksat) and other related parameters like sorptivity and percolation in the field. The set can be installed easily and can be used to a depth of 15 m. The permeameter is available for use with a laptop/tablet and for use with a (flash) ...
Manufactured by:Royal Eijkelkamp based inGiesbeek, NETHERLANDS
Durable and robust water level and datalogger. Housing is corrosion proof. Conductivity range of 0 to 120 mS/cm. Long-term solution for monitoring saline environments. Available in various measuring ...
Manufactured by:Royal Eijkelkamp based inGiesbeek, NETHERLANDS
Connect your sensors, like a water level logger and water quality probe, to our new GDT Prime Plus and transmit sensor data to anywhere in the world. Our GDT Prime Plus modem is designed for extended use in the field and to send water level, temperature, conductivity, rainfall, soil moisture and various water quality data in a secure ...
Manufactured by:Royal Eijkelkamp based inGiesbeek, NETHERLANDS
The Van Dorn water sampler set with horizontal water bottle is specially designed for sampling in open water. Due to the choice of materials the set is also suitable for sampling coastal waters and for the analysis for heavy ...
Manufactured by:Royal Eijkelkamp based inGiesbeek, NETHERLANDS
The portable electronic balance with digital reading allows for accurate weighing in the field. The weighing capacity is 320 gram with an accuracy of 0.1 gram. The balance with hinged cover is highly protected against all kinds of pressure. The wallet-size can be conveniently kept in a jacket pocket. Nett-total weighing is possible: weight of tare-cup and weight of components are memorized in two ...
Manufactured by:Royal Eijkelkamp based inGiesbeek, NETHERLANDS
Granular composition test set, complete set with sieve shaker and standard set of sieves for dry and wet ...
Manufactured by:Royal Eijkelkamp based inGiesbeek, NETHERLANDS
Stainless steel wire mesh sieve, Ø 200 mm, rim size 50 mm, aperture 0.053 ...
Manufactured by:Royal Eijkelkamp based inGiesbeek, NETHERLANDS
Edelman auger Sand type, specially designed for use in non-cohesive soils. The wide blades are twisted for good soil penetration and are specially designed to keep the sample inside the auger. Available as one-piece auger or bottom part with various diameters and ...
Manufactured by:Royal Eijkelkamp based inGiesbeek, NETHERLANDS
Bailer auger set for hand-operated augerings, as well as the installation of sampling and monitoring wells, up to 7 metres depth in heterogeneous ...
Manufactured by:Royal Eijkelkamp based inGiesbeek, NETHERLANDS
The protective cap for drill pipes with a diameter of 90 mm is available in a variant with internal thread and with external thread. The protective caps are made of sturdy ...
Manufactured by:Royal Eijkelkamp based inGiesbeek, NETHERLANDS
The casing tube clamp consists of a hinged joint that fits around the casing tube, two handles and a rotating lever. The handle clamps the casing tube with a pre-set force. The casing tube clamp is used to push or turn the casing tube in the ground, and to pull it out ...
Manufactured by:Royal Eijkelkamp based inGiesbeek, NETHERLANDS
The threaded cap is made of high-quality steel. The product is suitable for drill pipes with a diameter of 90 mm and has a left-hand, coarse, round female ...
Manufactured by:Royal Eijkelkamp based inGiesbeek, NETHERLANDS
This casing shoe with a diameter of 90 mm is suitable for drill pipes with the same diameter. The casing shoe is toothed and has a length of 10 cm. The casing shoe is used to make it easier to penetrate the soil. Finally, the casing shoe has a coarse, left-hand ...
Manufactured by:Royal Eijkelkamp based inGiesbeek, NETHERLANDS
This bailer sampler is developed to sample water (or other liquids) at any required depth. The stainless steel material is easy to clean and minimises cross ...
Manufactured by:Royal Eijkelkamp based inGiesbeek, NETHERLANDS
Sample tube, Ø 63x57mm, length 150 cm, pvc transparant, inclusive covers, set of 3 ...
Manufactured by:Royal Eijkelkamp based inGiesbeek, NETHERLANDS
Collar for sediment core sampler type Beeker with conical ...
Manufactured by:Royal Eijkelkamp based inGiesbeek, NETHERLANDS
Pressure pump with manometer and large coupling connection (female) with carabine hook, inclusive ...