Refine by
Accelerometer Equipment Supplied In Malaysia
43 equipment items found
Manufactured by:Larson Davis, a division of PCB Piezotronics based inDepew, NEW YORK (USA)
Larson Davis offers a selected range of measurement accelerometers optimized for use with the HVM200 Human Vibration Monitor. They cover the complete range of applications including Hand-arm, Whole-body, and Glove Transmissibility ...
Manufactured by:GeoSIG Ltd based inSchlieren, SWITZERLAND
The AC-73 sensor package is a true electro-mechanical triaxial downhole accelerometer designed for broadband earthquake monitoring and applications requiring highly sensitive and rugged sensors with minimum maintenance and a simple method for periodic ...
Manufactured by:GeoSIG Ltd based inSchlieren, SWITZERLAND
The AC-73-DH sensor package is a true electro-mechanical triaxial downhole accelerometer designed for broadband earthquake monitoring and applications requiring highly sensitive and rugged sensors with minimum maintenance and a simple method for periodic testing. The rugged mass suspension moving coil system improves the signal to noise ratio. The magnetic system and capacitive ...
Manufactured by:GeoSIG Ltd based inSchlieren, SWITZERLAND
The AC-43 sensor package is a triaxial accelerometer designed for urban and industrial applications regarding strong motion earthquake survey and vibration monitoring as well as alarm and switch systems. All these applications require rugged sensors with minimum maintenance and a simple method for periodic ...
Manufactured by:Manfred Weber Metra MeB- und Frequenztechnik in Radebeul e.K. based inRadebeul, GERMANY
Miniature Accelerometers for light test objects. With IEPEvoltage output. With sensitivities 10 mV/g and 100 mV/g. Good resolution, also at low frequencies. High resonant frequencies. KS9410/100 and KS9510/100with internal resonant frequency compensation - linear up to 36 kHz (3 dB). ...
Manufactured by:Manfred Weber Metra MeB- und Frequenztechnik in Radebeul e.K. based inRadebeul, GERMANY
These piezoelectric vibration transducers are suitable for lightweight measurement objects and for applications where small sensor dimensions are important. Their high upper cutoff frequency is also advantageous. Due to the extremely low-noise piezoelectric measuring principle, equally high accelerations and, in conjunction with an appropriate amplifier, very low accelerations can be ...
Manufactured by:Manfred Weber Metra MeB- und Frequenztechnik in Radebeul e.K. based inRadebeul, GERMANY
Triaxial accelerometer in compact design for general applications and modal analysis. Contains an electronic data sheet ...
Manufactured by:Manfred Weber Metra MeB- und Frequenztechnik in Radebeul e.K. based inRadebeul, GERMANY
General purpose shear-type accelerometer. Two sensitivity versions. Low sensitivity to temperature transients. Low influence of base bending effects. IEPE compatible output allows long cables. High linear band width up to 37 kHz. Low noise, high resolution. Sturdy stainless steel housing. ...
Manufactured by:Manfred Weber Metra MeB- und Frequenztechnik in Radebeul e.K. based inRadebeul, GERMANY
Due to their high sensitivity, these piezoelectric accelerometers are particularly suitable for seismic investigations and the measurement of structural vibrations. Typical applications include vibration monitoring on houses, towers, masts, dams, bridges, wind turbines, oil platforms and pipelines. ...
Manufactured by:GeoSIG Ltd based inSchlieren, SWITZERLAND
The AC-23 package is a triaxial accelerometer sensor designed for Strong Motion and industrial applications where a high sensitivity is required. The AC-2x series are state-of-the-art servo-accelerometers based on standard exploration geophone mass-spring system with electronic feedback. ...
Manufactured by:Manfred Weber Metra MeB- und Frequenztechnik in Radebeul e.K. based inRadebeul, GERMANY
These accelerometers with charge output are suitable for measurements at higher temperatures in laboratory and ...
Manufactured by:Manfred Weber Metra MeB- und Frequenztechnik in Radebeul e.K. based inRadebeul, GERMANY
These accelerometers with charge output are suitable for measurements at higher temperatures in laboratory and ...
Manufactured by:Svantek Sp. z o.o. based inWarsaw, POLAND
SV 150 is a tri-axial accelerometer designed to be used with the SV 106 human vibration analyser to provide a dedicated instrument for measurements according to ISO 5349-2. The accelerometer can easily be attached to the handle of the vibrating tool being measured. The sensor's TEDS memory stores information about calibration factor limiting the risk of ...
by:SHAMA Technologies (S) Pte Ltd. based inSingapore, SINGAPORE
DC accelerometer based inclinometers with 360 degree range (single axis) or +/- 45 degrees (dual axis). Analog outputs are scaled to exact physical ...
Manufactured by:Larson Davis, a division of PCB Piezotronics based inDepew, NEW YORK (USA)
Provides microphone polarization voltage, adjustable gain and filtering (A-weight, C-weight, or band-pass). Can also be used with ICP and charge-coupled accelerometers with the appropriate accessories. Automated sequential multi-channel sound and vibration measurements using a single or dual channel analyzer under PC control via RS232 interface. One example is the measurement of ...
Premium
Manufactured by:Casella based inKempston, UNITED KINGDOM
Make all the measurements necessary for Hand Arm Vibration risk assessments. Casella's Tri-Axial Hand Arm Vibration Meter has been specifically designed for Hand Arm Vibration Exposure ...
Premium
Manufactured by:Gutermann AG based inZug, SWITZERLAND
The acoustic microphone any leak technician should have in the glove-box: light-weight, compact and with a pure and clear sound amplification. And it's very cost-effective ...
Manufactured by:AVT Reliability based in, MALAYSIA
Machine Sentry® is a web hosted condition monitoring solution that provides detailed tools supported by world leading condition monitoring engineers. Machine Sentry® is the home of ADA™ the Automated Diagnostic Assistant. ADA™ can predict stage 2, 3 and 4 bearing failure and detect a wide range of other common fault conditions that impact on the reliability of equipment. It ...
Manufactured by:Ovarro based inEckington, UNITED KINGDOM
The Enigma5M remote correlating noise loggers provide precise leak detection in water distribution ...
Manufactured by:Advanced Logic Technology (ALT) based inRedange, LUXEMBOURG
The QL43 probe line has been designed to standup against higher temperatures and pressures.With diameters of only 43mm (1 11/16”) the probes are available rated to 125°C (257°F) and 170°C (338°F) and withstand pressures of 700 bar (10160 psi). Ultrasonic televiewer, natural gamma, casing collar locator and deviation probes complement each other in the QL 43 probe ...