Refine by
Applications
- Cathodic Protection and Pipeline Integrity Monitoring Solution for Municipal Water & Utilities
- Water monitoring instruments for surface water monitoring
- Air pollution, emission and process monitoring systems for agriculture
- Air pollution, emission and process monitoring systems for metals
- Cathodic Protection and Pipeline Integrity Monitoring Solution for Tanks & Vessels
- Incinerator solutions for the hotel / resort sector
- Incinerator solutions for the mining / exploration sector
- Incinerator solutions for the industrial / factory waste sector
- Air pollution, emission and process monitoring systems for minerals
- Cathodic Protection and Pipeline Integrity Monitoring Solution for Oil & Gas Energy
- Cathodic Protection and Pipeline Integrity Monitoring Solution for Offshore Platforms
- Cathodic Protection and Pipeline Integrity Monitoring Solution for Power Generation
- Cathodic Protection and Pipeline Integrity Monitoring Solution for Wind Turbines
- Environmental solutions for the refining and petrochemical industry
- On-Line gas, particulate analyzers, flow monitors, data acquisition for combustion
- On-Line gas,particulate analyzers, flow monitors, data acquisition for cement plants
- On-Line gas,particulate analyzers, flow monitors, data acquisition for glass works
- Water monitoring instruments for groundwater monitoring
- Hazardous waste incinerators for medical sector
- Large medical incinerators for hospital use
- Small medical incinerators for health clinics and labs
- Medical waste incinerators for laboratories
- Incinerator solutions for the pharmaceutical sector
- Incinerator solutions for the pathological sector
- Environmental solutions for the pharmaceutical industry
- Air pollution, emission and process monitoring systems for food & pharma
- Environmental solutions for the chemical processing industry
- On-Line gas,particulate analyzers, flow monitors, data acquisition for process control
- Environmental solutions for the food and beverage industry
- Air pollution, emission and process monitoring systems for power generation
- Absolute separation for the food and beverage sector
- Absolute separation for the energy sector
- Absolute separation for the environment sector
- Absolute separation for the recycling sector
- Air pollution, emission and process monitoring systems for chemicals
- Environmental solutions for the pulp and paper industry
- Incinerator solutions for the abattoir / slaughterhouse waste sector
- Incinerator solutions for the farm sector
- Li-ion battery electrode manufacturing
- Environmental solutions for the printing and packaging industry
- Air pollution, emission and process monitoring systems for incineration
- Chromatography laboratory instrumentation for chemical industry
- Environmental solutions for the metals and mining industry
- Air pollution, emission and process monitoring systems for leakage detection
- Environmental solutions for the automotive industry - industrial painting and other finishing applications
- Environmental solutions for the waste incineration industry
- Industrial waste solutions for compound feed industry
- Asphalt production - monitoring solutions for process optimization & energy saving
- Environmental solutions for the cement manufacturing industry
- Environmental solutions for the composites and carbon fiber industry
- Surface water quality testing for the environmental monitoring industry
- Chromatography laboratory instrumentation for food & beverage industry
- Water monitoring instruments for water quality monitoring
- Air pollution, emission and process monitoring systems for laboratory
- Underwater cleaning solutions for industry sector
- Ultra High Temperature Solar Technology for Green Hydrogen Energy Production
- Solutions for Environmental
- Environmental solutions for the iron and steel industry
- Chromatography laboratory instrumentation for pharmaceutical industry
- Industrial waste solutions for chemical industry
- Irrigation solutions for Apple Crops
- Soil moisture monitoring solution for soil science industry
- Air pollution, emission and process monitoring systems for natural gas
- On-line gas, particulate analyzers, flow monitors, data acquisition for construction materials industry
- Soil moisture monitoring solution for plant science sector
- AMANDUS KAHL Pelleting plants for Feed industry
- Pelleting plants for Recycling industry
- Air pollution, emission and process monitoring systems for odor detection
- Gas Turbine Generator for Oil & Gas Solution
- Gas Turbine Generator for Industrial & Commercial Solution
- Gas Turbine Generator for Waste to Energy Solution
- Gas Turbine Generator for Marine
- Underwater cleaning solutions for pool cleaners industry
- Underwater cleaning solutions for aquaculture industry
- Solutions for Functional Additives
Xprt Equipment Supplied In Morocco
2,278 equipment items found
Showcase
Manufactured by:BUCHI based inFlawil, SWITZERLAND
The next generation laboratory spray dryer. With the Mini Spray Dryer S-300, BUCHI solidifies its position as a global market leader for more than 40 years. The laboratory spray dryer combines outstanding product design with unique instrument capabilities to offer a superior user ...
Showcase
Manufactured by:Komax AG based inDierikon, SWITZERLAND
The Cut & Strip Family E400 processes wire, tubing, ribbon, and multiconductor cables from 0.8 – 12.5 mm (0.032 – 0.49") with cross-sections from 0.14 – 16 mm² (26 – 6 AWG). Standard applications of the Cut & Strip machine series E400 include stripping the outer jacket in several steps, as well as full and partial strips on either or both sides. It processes ...
Showcase
Manufactured by:BUCHI based inFlawil, SWITZERLAND
Pre-incineration unit for ash determination. The Wet Digester B-440 is an ecological pre-incineration unit for ash determination in different sample types. Select from a wide temperature range of up to 600 °C for more flexibility. Improve reproducibility with programmable incineration ...
Showcase
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
The device is used to monitor and record the quality of the SF6 gas in a gas compartment. The following quality parameters can be determined with only one measurement: SF6 volume percentage (%). Moisture concentration (°C atmosphere, °C pressure, °F atmosphere, °F pressure, ppmv, ppmw). SO2-Concentration ...
Showcase
Manufactured by:Weda Robotics based inSödertälje, SWEDEN
YT-600 is a remote controlled vehicle for sediment (sludge) removal in all sorts of reservoirs'. The powerful on-board submersible pump and wide nozzle allows for efficient cleaning of large bottom surfaces. The sediment is pumped through a hose to a seleceted discharge point or to a filter. Traditional cleaning after draining and then removal of the sediment requires the reservoir to be taken ...
Premium
Manufactured by:Komax AG based inDierikon, SWITZERLAND
Low cost solution allowing unattended operation. WireStacker 1000 stack wire up to a length of 3.0 m (10 ft.). Greatly reduces labour involved in handling long wires. Passive design built for almost unlimited and trouble free cycles. Feed through design for handling lengths longer than 3.0 m (10 ft.). Uses dedicated wire stacker interface on the EcoStrip 9300 / 9320,. OmniStrip 9450, PowerStrip ...
Premium
Manufactured by:Komax AG based inDierikon, SWITZERLAND
The CoaxStrip 5300 RX strips wires and cables with conductors ranging from 0.07 mm (0.003") to 1.8 mm (0.071") in outer diameter, with a maximum stripping length of 29 mm (1.14"). The CoaxStrip 5300 RX strips extremely thin microcoaxial cables with inner diameters as small as 0.07 mm (42 AWG)—thinner than a human hair—in very short cycle times. This machine handles materials that are ...
Premium
Manufactured by:Komax AG based inDierikon, SWITZERLAND
The Screw Tightening System provides you with the safety-relevant screw connections to tighten with the correct torque and angle of rotation. The Screw Tightening System is designed to provide precise and accurate screw connections with the correct angle of rotation and torque. The positioning arm ensures that the tool can only perform a screw connection when the correct position is reached. This ...
Premium
Manufactured by:Komax AG based inDierikon, SWITZERLAND
The smallest test systems TS1300-ALU with extra wide testing width are particularly well suited for the convenient and reliable testing of smaller cable and wire harnesses. The on-bench solutions TS 1300-ALU can be used flexibly due to their compact size with a wider testing field. They are equipped with frequently used test components and can also be modified according to the customer’s ...
Premium
Manufactured by:Komax AG based inDierikon, SWITZERLAND
In contrast to Omega 740/750 series, the Omega 745/755 machines are also equipped with a fully automatic conveyor system for depositing the wire harnesses. As with all models in the Omega series, automatic wire assembly can be individually adapted with the Omega 745/755. The machines differ only in the number of modules (five module options for the Omega 745 and eight for the Omega 755). ...
Premium
Manufactured by:Komax AG based inDierikon, SWITZERLAND
The Qstat-100 motorized pull-out force measurement device checks and visualizes the pull-out profile as a transportable table-top device to check the wire harness quality. Manually operated pull-out force measurement devices provide contradictory data depending on the pulling force of the operators. The IEC standard stipulates that a pull measurement device measures with a constant pull rate. The ...
Premium
Manufactured by:Komax AG based inDierikon, SWITZERLAND
The IntelliMod programmer offers simple and comfortable programming and parameterization of intelligent test adapters with special functions. The IntelliMod programmer is a highly useful tool for anyone who needs to program test adapters for color detection, qualified leak test, ring eyelets, or B+. With a large, illuminated color display, it''s easy and straightforward to parameterize test ...
Premium
Manufactured by:Komax AG based inDierikon, SWITZERLAND
The SLU 3000 sealing station applies weather seals on wire ends with diameters of 10.5 mm (0.41") or 17 mm (0.67") on fully automatic cut, strip, and terminate machines. The compact sealing unit SLU 3000, with its proven technology, is specifically designed for high-speed processing of almost all seal types, including irregularly shaped and hard-shell seals, at speeds of up to 200 m/s (656 ...
Premium
Manufactured by:Komax AG based inDierikon, SWITZERLAND
The universal KT 630 wiring tester with up to 1024 test points improves your quality assurance through precise low-voltage and high-voltage tests. The KT 630 wiring tester offers insulation tests up to 1500 VDC, dielectric strength tests up to 1060 VAC/1500 VDC, and high-current tests up to 2 ADC. It also performs precise connection, short-circuit, and component tests, as well as accurate testing ...
Premium
Manufactured by:Komax AG based inDierikon, SWITZERLAND
The portable B300 stripping machine reliably strips cables with cross sections from 0.03 to 8 mm² (32 to 8 AWG) and up to 7 mm (0.27") outer diameter. The portable and programmable Strip Series B300 is easy to operate, even without programming knowledge. Its ergonomic design and intuitive 5” color touchscreen interface make usage simple and efficient. High repeat accuracy, precise ...
Premium
Manufactured by:Komax AG based inDierikon, SWITZERLAND
The smallest test systems TS1300L (low design with 600 m width) in the console housing are particularly convenient and reliable for testing of smaller cable and wire harnesses. The on-bench solutions TS 1300L can be used flexibly due to their compact size. They are equipped with frequently used test components and can also be modified according to the customer’s wishes. The ergonomically ...
Premium
Manufactured by:Komax AG based inDierikon, SWITZERLAND
The ACD incision monitoring system automatically detects the smallest contact between the blade and conductor strands for flawless crimp results and the highest requirements. Miniaturization and new technologies are placing increasingly stringent demands on wire processing. To meet these demands, the Automatic Conductor Detector (ACD) system — integrated into the blade holder of all ...
Premium
Manufactured by:Komax AG based inDierikon, SWITZERLAND
The KTB E TWIST SPOT electric spot taping machine, based on the proven KTB E Plus technology, can also finish off the open ends of twisted pair wires. After removing the cables from the twisting machine, the KTB E TWIST SPOT applies spot tape according to your specifications to fix the open ends of twisted pair wires. Automation saves up to 50% of the production time compared to manual processes. ...
Premium
Manufactured by:Komax AG based inDierikon, SWITZERLAND
The Crimp Module Analyzer quality measuring device is used to measure and check the stability of the crimp module in μm using a two-stage force simulator. The crimp module analyzer allows the stability of the module stroke (STSA, Stroke Stability Analysis) to be measured for mci 7x1, mci 7x2, bt 7x2 and C13x0. A PC or laptop with at least Windows® 10 (64 Bit) is required to perform the ...
Premium
Manufactured by:Komax AG based inDierikon, SWITZERLAND
The The PreFeeder 2500 is an active dereeler and the ideal feeding system for wire, small cables and tubing of up to 12 mm (0.47") in diameter with a rotating speed of 265 rpm. The PreFeeder 2500 is a simple solution for high production output. The feeding process allows rapid acceleration at various speeds of up to 265 rpm. Because of the active dereeling of the cable wheel the pull force within ...