Refine by
Applications
- Cathodic Protection and Pipeline Integrity Monitoring Solution for Municipal Water & Utilities
- Water monitoring instruments for surface water monitoring
- Air pollution, emission and process monitoring systems for agriculture
- Air pollution, emission and process monitoring systems for metals
- Cathodic Protection and Pipeline Integrity Monitoring Solution for Tanks & Vessels
- Incinerator solutions for the hotel / resort sector
- Incinerator solutions for the mining / exploration sector
- Incinerator solutions for the industrial / factory waste sector
- Air pollution, emission and process monitoring systems for minerals
- Cathodic Protection and Pipeline Integrity Monitoring Solution for Oil & Gas Energy
- Cathodic Protection and Pipeline Integrity Monitoring Solution for Offshore Platforms
- Cathodic Protection and Pipeline Integrity Monitoring Solution for Power Generation
- Cathodic Protection and Pipeline Integrity Monitoring Solution for Wind Turbines
- Environmental solutions for the refining and petrochemical industry
- On-Line gas, particulate analyzers, flow monitors, data acquisition for combustion
- On-Line gas,particulate analyzers, flow monitors, data acquisition for cement plants
- On-Line gas,particulate analyzers, flow monitors, data acquisition for glass works
- Water monitoring instruments for groundwater monitoring
- Hazardous waste incinerators for medical sector
- Large medical incinerators for hospital use
- Small medical incinerators for health clinics and labs
- Medical waste incinerators for laboratories
- Incinerator solutions for the pharmaceutical sector
- Incinerator solutions for the pathological sector
- Environmental solutions for the pharmaceutical industry
- Air pollution, emission and process monitoring systems for food & pharma
- Environmental solutions for the chemical processing industry
- On-Line gas,particulate analyzers, flow monitors, data acquisition for process control
- Environmental solutions for the food and beverage industry
- Air pollution, emission and process monitoring systems for power generation
- Absolute separation for the food and beverage sector
- Absolute separation for the energy sector
- Absolute separation for the environment sector
- Absolute separation for the recycling sector
- Air pollution, emission and process monitoring systems for chemicals
- Environmental solutions for the pulp and paper industry
- Incinerator solutions for the abattoir / slaughterhouse waste sector
- Incinerator solutions for the farm sector
- Li-ion battery electrode manufacturing
- Environmental solutions for the printing and packaging industry
- Air pollution, emission and process monitoring systems for incineration
- Chromatography laboratory instrumentation for chemical industry
- Environmental solutions for the metals and mining industry
- Air pollution, emission and process monitoring systems for leakage detection
- Environmental solutions for the automotive industry - industrial painting and other finishing applications
- Environmental solutions for the waste incineration industry
- Industrial waste solutions for compound feed industry
- Asphalt production - monitoring solutions for process optimization & energy saving
- Environmental solutions for the cement manufacturing industry
- Environmental solutions for the composites and carbon fiber industry
- Surface water quality testing for the environmental monitoring industry
- Chromatography laboratory instrumentation for food & beverage industry
- Water monitoring instruments for water quality monitoring
- Air pollution, emission and process monitoring systems for laboratory
- Underwater cleaning solutions for industry sector
- Ultra High Temperature Solar Technology for Green Hydrogen Energy Production
- Solutions for Environmental
- Environmental solutions for the iron and steel industry
- Chromatography laboratory instrumentation for pharmaceutical industry
- Industrial waste solutions for chemical industry
- Irrigation solutions for Apple Crops
- Soil moisture monitoring solution for soil science industry
- Air pollution, emission and process monitoring systems for natural gas
- On-line gas, particulate analyzers, flow monitors, data acquisition for construction materials industry
- Soil moisture monitoring solution for plant science sector
- AMANDUS KAHL Pelleting plants for Feed industry
- Pelleting plants for Recycling industry
- Air pollution, emission and process monitoring systems for odor detection
- Gas Turbine Generator for Oil & Gas Solution
- Gas Turbine Generator for Industrial & Commercial Solution
- Gas Turbine Generator for Waste to Energy Solution
- Gas Turbine Generator for Marine
- Underwater cleaning solutions for pool cleaners industry
- Underwater cleaning solutions for aquaculture industry
- Solutions for Functional Additives
Xprt Equipment Supplied In Morocco
2,278 equipment items found
Showcase
Manufactured by:Komax AG based inDierikon, SWITZERLAND
The Zeta 630 increases productivity in control cabinet construction with two process modules from batch size 1 and with up to 36 different wires in the wire changer. The wide variability of control cabinet construction requires many materials such as wire types, terminals or ferrules. The Zeta 630 allows just-in-time processing in batch or sequence production of various wires for cabinet building ...
Showcase
Manufactured by:BUCHI based inFlawil, SWITZERLAND
Pre-incineration unit for ash determination. The Wet Digester B-440 is an ecological pre-incineration unit for ash determination in different sample types. Select from a wide temperature range of up to 600 °C for more flexibility. Improve reproducibility with programmable incineration ...
Showcase
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
The device is used to monitor and record the quality of the SF6 gas in a gas compartment. The following quality parameters can be determined with only one measurement: SF6 volume percentage (%). Moisture concentration (°C atmosphere, °C pressure, °F atmosphere, °F pressure, ppmv, ppmw). SO2-Concentration ...
Showcase
Manufactured by:Analytik Jena - Lab-loving people based inJena, GERMANY
Quality is the difference: Unique application diversity (TS, TC, TX, TOC, TIC, EC, AOC). Low maintenance and low operating costs. Fully automated solids sampler with high sample ...
Showcase
Manufactured by:ENVEA based inPoissy, FRANCE
CAI PAS Sense analyzers use photoacoustic infrared technology to measure many of the most commonly measured IR-absorbing gases. Gas selectivity is achieved through the use of optical filters that provide both a means of detecting the gas of interest and compensating for interfering gases and water. Both bench-top and rack-mounted PAS configurations are ...
Showcase
Manufactured by:Weda Robotics based inSödertälje, SWEDEN
YT-600 is a remote controlled vehicle for sediment (sludge) removal in all sorts of reservoirs'. The powerful on-board submersible pump and wide nozzle allows for efficient cleaning of large bottom surfaces. The sediment is pumped through a hose to a seleceted discharge point or to a filter. Traditional cleaning after draining and then removal of the sediment requires the reservoir to be taken ...
Premium
Manufactured by:Komax AG based inDierikon, SWITZERLAND
The MicroLab 45 is the best micrograph labratory for high level quality checks. With the fully automatic transport system, it quickly meassures and evaluates micrograph pictures. MicroLab 45 is designed for fast micrograph preparation of specimens up to a maximum diameter of 6 mm. The fully automatic transport system and the proven technology enable a short processing time. Parallel processes ...
Premium
Manufactured by:Komax AG based inDierikon, SWITZERLAND
Low cost solution allowing unattended operation. WireStacker 1000 stack wire up to a length of 3.0 m (10 ft.). Greatly reduces labour involved in handling long wires. Passive design built for almost unlimited and trouble free cycles. Feed through design for handling lengths longer than 3.0 m (10 ft.). Uses dedicated wire stacker interface on the EcoStrip 9300 / 9320,. OmniStrip 9450, PowerStrip ...
Premium
Manufactured by:Komax AG based inDierikon, SWITZERLAND
The NT 231 high-voltage tester with PC control offers up to 512 test points and checks up to 1000 VDC. Optimized for operation on test panels and test desks. The NT 231 wiring tester, the smallest high-voltage tester in adaptronic''s NT series, was specifically developed for operation on test desks and test benches. With functions such as adapter LEDs, an insertion aid for the production of wire ...
Premium
Manufactured by:Komax AG based inDierikon, SWITZERLAND
The SL Starlight crimp force measurement module with large LCD display offers flexible process monitoring for various fully automatic wire processing ...
Premium
Manufactured by:Komax AG based inDierikon, SWITZERLAND
EasyContrast simplifies wire marking verification by assessing contrast on all types of white and light-colored cables, saving time and ensuring accurate identification. EasyContrast is an advanced solution that guarantees precise and consistent contrast measurement, adhering to the standards of EN 3475 - 705 and SAE AS 4373. Specifically designed to meet the stringent quality demands of the ...
Premium
Manufactured by:Komax AG based inDierikon, SWITZERLAND
In contrast to Omega 740/750 series, the Omega 745/755 machines are also equipped with a fully automatic conveyor system for depositing the wire harnesses. As with all models in the Omega series, automatic wire assembly can be individually adapted with the Omega 745/755. The machines differ only in the number of modules (five module options for the Omega 745 and eight for the Omega 755). ...
Premium
Manufactured by:Komax AG based inDierikon, SWITZERLAND
The NT 236 mobile high-voltage tester in a hard-shell case without a display tests insulation at up to 512 test points up to 1000 VDC and test voltages of 80 - 1000 V. The NT 236 HV wiring tester is a mobile solution for your wiring tests and comes in a heavy-duty, waterproof, and dust-proof hard-shell case.Providing high-voltage tests up to 1000 VDC and the ability to test with up to 512 test ...
Premium
Manufactured by:Komax AG based inDierikon, SWITZERLAND
The PreFeeder 1000 handles reels weighing up to 20 kg (44.4 lbs.) and cables with up to 6 mm (0.236") in diameter for tension-free prefeeding to automatic wire processing machine. The universal benchtop prefeeder, the PreFeeder 1000, is designed for constant tension-free dereeling of a wide variety of cables, wires, and tubes, with a pulling speed of up to 1.8 m/s (5.9 ft/s). It accepts both ...
Premium
Manufactured by:Komax AG based inDierikon, SWITZERLAND
The QpLite2 is a scalable crimp force monitoring device (CFM) ensuring the quality of each crimp. It can be integrated with either single or double-channel benchtop crimp presses. The QpLite2 redefines crimping processes, setting new standards for precision and efficiency. It is designed to adapt seamlessly to evolving requirements, allowing function upgrades without hardware replacements. With ...
Premium
Manufactured by:Komax AG based inDierikon, SWITZERLAND
The CM03 MIL crimp module can be used on most fully automatic wire processing machines for processing loose and turned pin and socket terminals. The CM03 MIL crimp module can be used on most Komax fully automatic crimping machines for processing loose and turned pin and socket terminals. The reliable feeding of the module ensures efficient sorting. Together with the precise four-point crimp ...
Premium
Manufactured by:Komax AG based inDierikon, SWITZERLAND
The MicroLab 20 is a fast and reliable micrograph laboratory solution for quick analysis on wires ranging from 0.05 mm² to 80 mm², with customizable reporting options. In comparison with its predecessor, the MicroLab 20 can cut a broader range of wires, spanning from 0.05 mm² to 80 mm². Additionally, it offers the convenience of all-in-one cutting and polishing at the press of ...
Premium
Manufactured by:Komax AG based inDierikon, SWITZERLAND
The SLU 3000 sealing station applies weather seals on wire ends with diameters of 10.5 mm (0.41") or 17 mm (0.67") on fully automatic cut, strip, and terminate machines. The compact sealing unit SLU 3000, with its proven technology, is specifically designed for high-speed processing of almost all seal types, including irregularly shaped and hard-shell seals, at speeds of up to 200 m/s (656 ...
Premium
Manufactured by:Komax AG based inDierikon, SWITZERLAND
The KTB EK electric bundling machine is based on the proven technology of the KTB E Plus but is specially designed for integration into welding tables. The EK series electric bundlers are based on the KTB 50 E PLUS technology. In addition to the proven advantages, such as short process cycles and flexibility in processing diverse strips, the unit can be integrated into the production sequence ...
Premium
Manufactured by:Komax AG based inDierikon, SWITZERLAND
The pneumatic wire and cable stripper, UniStrip 2545, is designed for jacket stripping of glass optical fiber (GOF) cables and discrete wires up to 3.2 mm (0.12'''') in diameter. The compact UniStrip 2545 is a pneumatic wire and cable stripping machine with a wire size range of 0.03 - 2.08 mm² (AWG 14 - 32). It strips lengths from 25 to 45 mm (1" - 1.8") and excels with its compact ...