- Home
- mozambique
- Equipment
Refine by
Xprt Equipment Supplied In Mozambique
473 equipment items found
Manufactured by:The EFACEC Group based inS. Mamede de Infesta, PORTUGAL
Reserve unit for energy supply. High Mobility. Flexibility. Reduced costs. Reduced time of ...
Manufactured by:The EFACEC Group based inS. Mamede de Infesta, PORTUGAL
This is an outdoor solution composed of medium voltage circuit breakers enclosed in custom-made casings. This solution is developed in keeping with the most demanding international standards and is able to withstand the most adverse extreme conditions. Besides the circuit breaker, current transformers are also included, as well as control, measurement, protection and signaling elements. OCBs are ...
Manufactured by:The EFACEC Group based inS. Mamede de Infesta, PORTUGAL
The QBN7 is a Medium Voltage Air Insulated Switchgear, constructed on a modular design with metallic partitions, making it easy to extend with more feeders. The installation area required is quite small, but without compromising the operational safety or easy access for maintenance. The standard operation of the equipment is exclusively carried-out from the front and the need to access it from ...
Manufactured by:The EFACEC Group based inS. Mamede de Infesta, PORTUGAL
We develop a wide range of equipment in direct current from 12V; 24V; 48V; 110V … and 5A to 4000A. We have also created Control and Supervision Systems that allow greater facility of operation and interface: PSM, miniPSM and EFAPOWER SNMP. These CC systems integrate the range EFAPOWER CIB. Our UPS range divides in: Monophasic (300VA to 10kVA); Tri- Mono (5kVA to 30kVA) and three-phase ...
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
Waukesha 275GL+ represents the most advanced generation of high-horsepower engines in the gas compression segment. A combination of robust construction and innovative technology, the 275GL+ lean-burn engine delivers excellence in fuel flexibility, efficiency, power output and emissions for unmatched performance. For maximum uptime and profitability, you can depend on the 275GL+ to get the job ...
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
The Waukesha Series Four rich-burn engines are the engines of choice for the harshest and most demanding gas compression, power generation and mechanical drive applications. The engines can reliably produce more power on hot field gases, at high altitudes, and in remote locations, all while delivering low emissions when paired with a 3-way catalyst (non-selective catalytic ...
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
The mobileFLEX portfolio is the latest advancement from GE to deliver lower-cost, lower-emission power to drill rigs, artificial lift enhanced oil recovery and oilfield equipment. An all-gas alternative to diesel units, mobileFLEX is an EPA mobile-certified solution that provides a cost advantage to energy producers and operational advantage to drilling contractors by utilising field gases. For ...
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
Combined heat and power (CHP) or cogeneration has significant potential in the data centre industry. Electricity and heat recovered from a gas engine captive power plant can be deployed for useful onsite us. Converting the heat into cooling via absorption chillers is called combined cooling heat and power or trigeneration, and can be deployed to support the cooling of data centre ...
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
Using a combined heat and power (CHP) or cogeneration plant in a hospital is an ideal way of achieving improved energy efficiency and reduced carbon emissions. Its utilisation helps a hospital’s limited financial resources go further. Natural gas is a clean-burning low carbon emission fuel. A CHP plant facilitates the high efficiency use of this fuel, by recovering not only electricity but ...
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
Biomethane is as a green non-fossil source of energy. Biomethane is produced from biogas derived from organic matter (often from sewage, landfill, food waste or distillery waste) which makes it a renewable source of energy. Biogas can be dried and cleaned to remove impurities and upgraded to pure biomethane. Biomethane has a number of environmental benefits, the main one being that the methane ...
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
Continuously refined on GE Jenbacher’s extensive experience, the GE Jenbacher type 6 engines are reliable, advanced products serving the 1.8 to 4.4 MW power range. It’s 1,500 rpm engine speed results in a high power density and low installation costs. The type 6 pre-combustion chamber achieves maximum efficiency with low emissions. Proven design and optimised components enable a ...
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
As the only gas engine specialist offering small and large engines, GE is introducing the innovative J920 9.5MWesystem. Whether you are seeking full power at high efficiency levels or a unit capable of short start-up times, GE’s J920 Jenbacher gas engine is your ideal solution for reliable lasting power and grid stabilisation with a low carbon ...
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
The Jenbacher Type-2 gas engine was introduced in 1974 and is the engine with the longest development history of the range. The 208 has 8 inline cylinders and is available at electrical output from 249kWe or 335kWe. The J208 is renowned for its robust design and highest levels of component durability. It is particularly well suited to troublesome gases such as landfill ...
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
Long service intervals, maintenance-friendly engine design and low fuel consumption ensure maximum efficiency in GE Energy’s type 3 engines. Optimised engine components prolonging service, life even when using non-pipeline gases such as landfill gas. The Type-3 stands out in its 500 to 1,100 kWe power range due to its technical maturity and high degree of ...
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
The GE Jenbacher container is a high quality unit which can be deployed where economical and speedy installation is required. The GE Jenbacher containers are fully tested when they leave the production facility and are excellent for plug-and-play applications. The overall compact design ensures a space saving installation with service-orientated ...
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
Gas engines are well suited to acting in island mode operation as a captive power plant. Island mode operation relates to those power plants that operate in isolation from the national or local electricity distribution ...
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
A GE's Jenbacher genset is configured to produce electrical power only, which the Jenbacher unit does at high efficiency. When a unit is in a genset configuration the engine, alternator and other supporting items are located on a skid. Waste heat from the engine would be dissipated in the exhaust gas and via an engine cooling circuit linked to heat dump ...
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
Fuel gas boosters or blowers are used to raise the pressure of fuel gas to the operating level of the gas engine or combined heat and power plant. Gas boosters are often required for biological gas applications where the pressure level of the biogas holder is below ...
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
The CL.AIR Exhaust After-Treatment System for GE’s Jenbacher gas engines is a thermal regenerative post-combustion system for engine exhaust gases. Since no catalytic reactions take place during the thermal treatment of the exhaust, as it is insensitive to impurities in the fuel gas, the CL.AIR system is particularly suitable for use with critical gases such as biogas, for which catalytic ...
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
Absorption chillers can be used to deliver a trigeneration solution for a combined heat and power plant. Absorption chillers produce chilled water by heating two different substances that are in thermal equilibrium to separation, then reuniting them through heat removal. An example of two substances that may be used for this process is water and lithium bromide. Absorption chillers can be ...