- Home
- Equipment
- netherlands
- waste processing
Show results for
Refine by
Applications
- Machines and plants for organic fraction from waste
- Machines and plants for biowaste from agriculture
- Solutions for water treatment and water disinfection industry
- Products for W.E.E.E recycling and car fluff
- Pelleting plants for Recycling industry
- Machines and plants for Municipal Solid Waste (MSW)
- Machines and plants for industrial waste
- Machines and plants for material recovery facility (MRF)
- Waste Treatment Plant for Stop Polluanttion
- Mechanical Separation Solutions for Landfill Mining
- Screening System for Biomass
- Horticultural Biobased Products for Hydroponics
- Horticultural Biobased Products for Tissue Culture
- Renewable Energy Solutions for Energy
- Solutions for Waste
- Industrial waste solutions for recycling industry
- Biomass collection for the municipal solid waste industry
- Organic waste recycling for the composting industry
- Solutions for potable water treatment sector
- Solutions for waste water treatment
- Water treatment solutions for utility water treatment
- Water Quality Management Instruments for Circuit Board Cleanliness Testing Industry
- Water Quality Management Instruments for Deionized Water Industry
- Water Quality Management Instruments for Environmental Industry
- Water Quality Management Instruments for Fountain Solutions
- Water Quality Management Instruments for Horticulture Industry
- Water Quality Management Instruments for Hydroponics Industry
- Water Quality Management Instruments for Oxidation Reduction Potential / Redox
- Water Quality Management Instruments for Reverse Osmosis
- Water Quality Management Instruments for Textiles Industry
Waste Processing Equipment Supplied In Netherlands
148 equipment items found
Manufactured by:Europe Forestry B.V. based inStegeren, NETHERLANDS
Hammermill opening: 69 cm x 123 cm. Hammermill Ø: OD 43 cm. Tooling: 24 Hammers. Power: 580 HP CAT C.15. Drive: Transfluid Fluid ...
Manufactured by:Europe Forestry B.V. based inStegeren, NETHERLANDS
Hammermill opening: 686 x 1600 mm. Hammermill Ø: OD 43 cm. Tooling: 32 Fixed hammers. Power: 875-1050 HP. Drive: PT Tech Fluid ...
Manufactured by:Mesys Industrial Air Systems BV based inHerwen, NETHERLANDS
A completely new technology in waste processing is the splitting of duckweed into cellulose, oil or biofuel. The installation which Mesys developed for this purpose helps water companies to scoop out 750,000 tonnes duckweed from their waters. The water companies are currently still paying for the disposal, but soon, the duckweed will be processed ...
Manufactured by:Gicom B.V. based inBiddinghuizen, NETHERLANDS
GICOM is a specialist in manufacturing chimney's for a variety of installations applied to processing organic waste. Every chimney is unique and designed according to specific customer demands and legal ...
Manufactured by:Royal Dutch Kusters Engineering based inVENLO, NETHERLANDS
The Rotoshifter is an innovative solution to sort various materials based on differences in form, density, and size. It separates mixed waste materials into multiple waste streams. It combines two separating techniques in one efficient, low energy consuming system: wind shifting and drum screening. This results in a two stage separation ...
Manufactured by:Komptech GmbH based inFrohnleiten, AUSTRIA
Compact technolgy with wide range of application: This compact system can be used to prepare various classes of waste wood for thermal or material reclamation. A gripper crane moves the wood to the feed hopper of the Crambo low-speed shredder. Unlike a high-speed shredder, it is very resistant to contraries. A magnetic separator over the conveyor pulls metals out of the shredded material stream. ...
Manufactured by:Nordic Water Products - A Sulzer Brand based inMölndal, SWEDEN
Nordic water has today two different well proven technologies for micropollutant reduction: 1) Based on adsorption or to some extent biological removal with Granular Activated Carbon (GAC). 2) Powdered Activated Carbon ...
Manufactured by:Nordic Water Products - A Sulzer Brand based inMölndal, SWEDEN
The modern Waste Water Treatment Plant (WWTP) design, NORDIC® Primary, has radically illuminated the benefits of primary filtration in modern pre-treatment processes ...
Manufactured by:Nordic Water Products - A Sulzer Brand based inMölndal, SWEDEN
Nordic Water offers several products used in tertiary treatment stages proven to keep outlet phosphorus levels less than 0.1 mg/l. The products are based on efficient usage of chemical precipitation and are the most cost/energy effective and reliable method available for municipal waste water treatment ...
Manufactured by:Nordic Water Products - A Sulzer Brand based inMölndal, SWEDEN
If you want to keep phosphorus levels really low – at less than 0.1 mg/l – study after study has demonstrated that our final processing stage, which is based on chemical direct precipitation using a DynaSand filter, is the most cost-effective and reliable method available for municipal waste water treatment ...
Premium
Manufactured by:KISTERS AG based inAachen, GERMANY
The TTurb is a digital sensor for optical turbidity measurements according to the 90° IR scattered light method. Depending on the sensor it can be used in pure water up to 100 FNU as well as in raw-, waste- and process waters up to 1000 FNU. TTurb is available with a 10 m or a 2 m fixed ...
Premium
Manufactured by:ProMinent GmbH based inHeidelberg, GERMANY
Ultra-pure or low-chloride and low-chlorate sodium-calcium hypochlorite requires specialist system technology. The electrolysis system CHLORINSITU III is the solution. Can be used for potable water, waste water, process water, swimming pool water and in cooling ...
Manufactured by:Vermeer based inPella, IOWA (USA)
For green waste processing facilities, the Vermeer electric HG6000E reduces organic waste. Install indoors or out, either as a stand-alone unit or as one component in an entire green waste reduction system. Available with either a skid mount or trailer to meet your jobsite ...
Manufactured by:BLUE-tec - Colubris Cleantech based inWageningen, NETHERLANDS
(O)MBR's can be applied for the treatment of : Industrial wastewater. Wastewater from the waste processing industry. Domestic wastewater. Wastewater on board of ships and off shore ...
Manufactured by:Dutch Magnetics BV. based inHelmond, NETHERLANDS
After moving through the magnetic field, the metal particles are released into a designated receptacle. Cross overbelt magnets are commonly used in industries like recycling, mining, and waste processing to protect downstream equipment and improve product ...
Manufactured by:Entec International BV based inBarendrecht, NETHERLANDS
The fast rotating mixers can be used for many applications such as mixing and dissolving chemicals, the production of paint and glue and for almost all waste water processes. The drives are available in three phases, one phase and air motor. Installed power from 0.18 kW to 1.5 kW. Drive shaft lengths up to 1.5 meters and stainless steel. The propeller diameters ...
Manufactured by:Bakker Magnetics B.V. based inEL Son, NETHERLANDS
Our Eddy Current separators effectively separate non-ferrous from other materials in the recycling- and metal industry, waste processing and bottom ...
Manufactured by:Aqua-Techniek B.V. based inHellevoetsluis, NETHERLANDS
Aqua-cite is selected, natural, hard, clean anthracite and is used in single-layer or in dual media filters for the purification of all kinds of water including potable, waste, process and swimming-pool ...
Manufactured by:Vermeer based inPella, IOWA (USA)
The TG7000 packs innovation and power for large land clearing projects and organic/wood waste processing applications. It processes through wood waste quickly with the exclusive Vermeer duplex drum to minimize maintenance, a PT tech wet clutch with microprocessor to automatically limit torque when necessary, and a patented ...
Manufactured by:G-force Consulting Engineers BV based inAlphen aan de Rijn, NETHERLANDS
G-force’s latest designed MKIIIFA. A Fully Automated Oily Waste Treatment Plant designed specifically to adjust process parameters to accommodate a wide range of oily waste classifications, simplify process decisions, reduce human error and eliminate down ...