- Home
- new zealand
- Equipment
Refine by
Applications
- Level Sensors Simplify Inventory for Food Processors
- Solutions for Real-Time Bulk Material Inventory for Cement
- Solutions for Bioenergy
- Solutions for Mining Industry
- Solutions for Precision Plastic Resin Inventory for Silos
- Solutions for Digitize Agriculture Inventory
- Pumps and Dredging Systems for Dredging
- Pumps and Dredging Systems for Industrial Dredging
- Pumps and Dredging Systems for Mining Dredging
- Pumps and Dredging Systems for Offshore dredging
- Wastewater Aeration for Distilling Industry
- Wastewater Aeration for Contractors
- Air Pollution Control Systems for Fire Testing
- Air Pollution Control Systems for Integrated Effluent Treatment
- Soil sampling and drilling solutions for agriculture industry
- Municipal
- Gas Mass Flow Meters, Sensors & Controllers for High Flow Gas Control
- Flow Solutions for Original Equipment Manufacturers (OEM)
- Moisture sensors for the construction and concrete industry
- Water sampling for the environmental industry
- Water monitoring instruments for surface water monitoring
- Wastewater Aeration for Chemical Industry
- Wastewater Aeration for Landfills Treating Leachate
- Wastewater Aeration for Petroleum Industry
- Water monitoring for the environmental industry
- Industrial
- Wastewater Aeration for Dairy & Cheese Industry
- Wastewater Aeration for Meat and Protein Industry
- Wastewater Aeration for Food Processing Industry
- Wastewater Aeration for Pharmaceutical Industry
- Wastewater Aeration for Beer Industry
- Wastewater Aeration for Wine Industry
- Flow Solutions for Aerospace
- In Line Air Flow Meters for Better Facilities Managemen
- Incinerator solutions for the hotel / resort sector
- Incinerator solutions for the mining / exploration sector
- Incinerator solutions for the industrial / factory waste sector
- Gas detectors for the manufacturing industry
- Wastewater Aeration for Sugar Industry
- Flow Solutions for Climate Change and Clean Energy
- Water monitoring instruments for groundwater monitoring
- Hazardous waste incinerators for medical sector
- Large medical incinerators for hospital use
- Small medical incinerators for health clinics and labs
- Medical waste incinerators for laboratories
- Incinerator solutions for the pharmaceutical sector
- Incinerator solutions for the pathological sector
- Air Pollution Control Systems for Water Scrubbing
- Flow Solutions for Flow Solutions for Mining & Raw Materials
- Flow Meter Solutions for Pulp & Paper
- Flow Solutions for Power & Energy
- Flow Solutions for Alternative Energy
- Flow Solutions for Cogeneration
- Flow Solutions for Flow Solutions for District Energy
- Flow Solutions for Energy Metering and Conservation Tools
- Flow Solutions for Waste Water Treatment Plant
- Submersible drainage & sludge pumping for the construction industry
- Submersible drainage & sludge pumping for the mining industry
- Submersible drainage & sludge pumping for steel mills
- Submersible drainage & sludge pumping for landfills
- Submersible drainage & sludge pumping for locks and canals
- Benchtop NMR spectrometer solutions for analytical NMR sector
- Wastewater Aeration for Pulp and Paper Industry
- Natural Gas Flow Control & Measurement Instruments for Allocation & Billing
- Nitrogen Gas Flow Measurement Solutions for Industrial & Research Applications
- Flow Solutions for Flow Solutions for Hazardous Area
- Flow Solutions for Manufacturing Process Control
- Soil sampling and drilling solutions for pest control industry
- Process analyzers & instruments for thin film/semiconductor/PVD
- Gas Analysers for Inert Gas Blanketing
- Air Air Pollution Abatement Systems for Noxious Gas Treatment
- Air Pollution Control Systems for Ammonia Scrubbing & Ammonium Sulphate Manufacture
- Air Pollution Control Systems for Toxic Heavy Metal and Dioxin Destruction
- Natural Gas Flow Control & Measurement Instruments for Natural Gas Distribution
- Flow Solutions for Flow Solutions for Gas Distribution & Cost Allocation
Xprt Equipment Supplied In New Zealand
9,422 equipment items found
Showcase
Manufactured by:KISTERS AG based inAachen, GERMANY
KISTERS TB3 is a high-quality tipping bucket rain gauge for measuring rainfall and precipitation in urban and rural locations. Due to the integrated syphon, the gauge delivers high levels of accuracy across a broad range of rainfall intensities. With the optional heater the TB3 is the ideal device for cold ...
Showcase
Manufactured by:Stevens Water Monitoring Systems, Inc. based inPortland, OREGON (USA)
The TB3 tipping bucket rain gauge features an integrated siphon mechanism designed to provide precise measurements across a wide range of rainfall intensities. Each unit comprises a collector funnel equipped with a stainless-steel leaf filter, an integrated siphon control system, an outer enclosure secured with quick-release fasteners, and a base housing the tipping bucket mechanism. The device ...
Showcase
Manufactured by:Beachcleaners Dorny based inKortrijk, BELGIUM
Our most maneuverable and precise construction. Utmost suitable for small - and difficult - ...
Showcase
Manufactured by:Cla-Val based inCosta Mesa, CALIFORNIA (USA)
The Model 100-01 is the basic valve used in nearly all Cla-Val automatic control valves. It is the valve of choice for system applications requiring remote control, pressure regulation, solenoid operation, rate of flow control, liquid level control or check valve ...
Showcase
Manufactured by:Stevens Water Monitoring Systems, Inc. based inPortland, OREGON (USA)
The Dyacon Meteorological Station MS-130 is a preconfigured weather monitoring device that requires no programming or specialized setup. This station is shipped with control module (data logger) with a cell module, solar panel, and the following sensors: wind and wind direction (with wind gust and direction averaging), barometric pressure, relative humidity, and ambient temperature. Other ...
Showcase
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
The device is used to monitor and record the quality of the SF6 gas in a gas compartment. The following quality parameters can be determined with only one measurement: SF6 volume percentage (%). Moisture concentration (°C atmosphere, °C pressure, °F atmosphere, °F pressure, ppmv, ppmw). SO2-Concentration ...
Premium
Manufactured by:Cla-Val based inCosta Mesa, CALIFORNIA (USA)
The Cla-Val Model CFF21 Flanged Float Control is a float operated pilot control installed in the water accumulation sump of a fuel filter/separator. It is designed to automatically actuate a water drain valve (Model 100AF) and to sense a rapid accumulation of water in the sump in excess of the capacity of the drain valve. If the water level cannot be reduced by the drain valve, the float control ...
Premium
Manufactured by:Cla-Val based inCosta Mesa, CALIFORNIA (USA)
The Cla-Val Model 90-FPX Pressure Reducing Valve automatically reduces a higher inlet pressure to a steady lower downstream pressure, regardless of changing flow rate and/or varying inlet pressure. This valve is an accurate, pilot-operated regulator capable of holding downstream pressure to a pre-determined limit. When downstream pressure exceeds the pressure setting of the control pilot, the ...
Premium
Manufactured by:Wyma Solutions based inChristchurch, NEW ZEALAND
Our Tip & Stack Bin System receives, tips and re-stacks up to three bins simultaneously. Wyma’s Tip & Stack System receives, tips and re-stacks bins. It can manage three bins simultaneously, reducing the required labour at the start of your line. As with all Wyma tipping solutions, the tipping process is very gentle with minimal produce ...
Premium
Manufactured by:Cla-Val based inCosta Mesa, CALIFORNIA (USA)
The Cla-Val UP-22D is designed to provide state of the art valve control for a variety of fluid control parameters. The UP-22D is supplied with a NEMA 4X stainless steel enclosure and supports both AC and DC solenoid applications. The VC-22D Valve Controller is mounted on an interior sub-panel isolating the technician from field wiring. The UP-22D is supplied with an AC noise filter and 60W 24VDC ...
Premium
Manufactured by:Cla-Val based inCosta Mesa, CALIFORNIA (USA)
The Cla-Val Model 100-01H consists of the standard Cla-Val 100-01 Hytrol Valve and the Cla-Val X43 H-Style Strainer. This flanged end, globe or angle pattern valves is available in sizes 1-1/2” through 24.” Its large flow area design, configured with the mesh perpendicular to flow, produces low-pressure drop while effectively protecting piping and equipment from pipeline ...
Premium
Manufactured by:Cla-Val based inCosta Mesa, CALIFORNIA (USA)
The Cla-Val Model 354GF Valve is used to control fuel pressure delivered into an aircraft through an underwing refueling nozzle. The 354GF is intended for use on various forms of aircraft refueling ...
Premium
Manufactured by:Wyma Solutions based inChristchurch, NEW ZEALAND
Wyma’s Wet Hopper is a cost effective, multi-purpose, pre-washing system, designed to remove excess mud, dirt and sand from produce without causing damage. The Wet Hopper C-Series, Wyma's flagship wet hopper, sets a new standard for versatile produce processing. This multi-purpose system is essential in effective produce wash lines, accommodating various root vegetables like carrots, ...
Premium
Manufactured by:Cla-Val based inCosta Mesa, CALIFORNIA (USA)
Cla-Val Models 136-01 and 636-01 Solenoid Control Valves are on-off control valves that either open or close upon receiving an electrical signal to the solenoid pilot control. These valves consist of a Hytrol main valve and a three-way solenoid valve that alternately applies pressure to or relieves pressure from the diaphragm chamber of the main valve. It is furnished either normally open ...
Premium
Manufactured by:Cla-Val based inCosta Mesa, CALIFORNIA (USA)
Cla-Val Model 136M-2 is a solenoid control valve typically used in air conditioning and chilled fresh water systems. ...
Premium
Manufactured by:Cla-Val based inCosta Mesa, CALIFORNIA (USA)
Cla-Val 90G-21 (globe) and 90A-21 (angle) Pressure Reducing Valves automatically reduce higher inlet pressure to a steady lower outlet pressure regardless of changing flow rate and/or varying inlet pressure. The valves pilot control system is very sensitive to slight downstream pressure fluctuations, and will automatically open or close to maintain the desired pressure ...
Premium
Manufactured by:Wyma Solutions based inChristchurch, NEW ZEALAND
Wyma’s Belt Inspection Conveyor is designed for manual inspection of produce. Our Belt Inspection Conveyor conveys produce for manual and visual inspection. It has a blue PVC belt for better contrast against produce. If produce is very dirty, we can supply a web belt. Dirt, debris and water fall through the web belt so they are not carried further down the processing line. There are waste ...
Premium
Manufactured by:Cla-Val based inCosta Mesa, CALIFORNIA (USA)
The 50M-2 Pressure Relief Valve is designed specifically for back pressure sustaining or pressure relief in constant pressure pumping systems. Available in a wide range of sizes and built to MIL Spec, MIL-F-20042, Class 150 or 250, with flanged end ...
Premium
Manufactured by:Cla-Val based inCosta Mesa, CALIFORNIA (USA)
The Cla-Val Model 81-01 and 681-01 Check Valve are hydraulically operated No-Slam Check Valves. Both valves open when the pressure at the inlet exceeds the discharge pressure. A gradual rate of opening prevents sudden opening surges. When a pressure reversal occurs the higher downstream pressure is applied to the cover chamber through the control tube lines, and the valve closes drip ...
Premium
Manufactured by:Wyma Solutions based inChristchurch, NEW ZEALAND
Smaller post-harvest processing operations need flexibility and performance. This example of a 5-ton per hour carrot wash line offers just that. Produce can be received onto an Elevator or via a Manual Bin Tipper into a Wet Hopper (a 2-ton capacity hopper is shown here). After an initial soak, produce is lifted out of the hopper and fed onto a Hedgehog Top Remover. This specialised machine ...