Refine by
Applications
- Gas detectors for the water industry
- Gas Detectors for the Aerospace Industry
- Gas safety and process control for gas/oil/coal-fired power generation and refineries
- Process analyzers & instruments for NOx reduction
- Process analyzers & instruments for continuous emissions monitoring (CEM)
- Process analyzers & instruments for combustion efficiency and fuel air ratio
- Process analyzers & instruments for oxygen measurement
Diffusive Sampling Equipment Supplied In Norway
67 equipment items found
Manufactured by:Markes based inBridgend, UNITED KINGDOM
Diffusion caps are used to define the air gap between the sampling environment and sorbent surface during diffusive sampling (also known as axial or passive sampling). Used in combination with a single-bed sorbent tube, penclip and aluminium long-term storage cap (at the other end of the tube), ...
Manufactured by:Airthings AS based inOslo, NORWAY
The only thing worse than a problem you can see is one you can't. Get always-on visibility into radon levels in your home with Airthings View Radon. It’s WiFi-connected for anytime access to live readings and timely notifications. It integrates an eInk display and radon, humidity, and temperature. It's a great fit for always-on radon detection in basements and ground floors where radon ...
Manufactured by:Specac based inOrpington, UNITED KINGDOM
For routine diffuse reflectance sampling, the Minidiff™ Plus is the ideal accessory of choice. High performance solids analysis is made simple through a minimal alignment optical system. Solid sampling versatility is maintained through the use of standard sampling cups and Diabrase abrasive sampling pads. ...
Manufactured by:Markes based inBridgend, UNITED KINGDOM
6mm ID- includes PTFE ferrule- pk ...
Manufactured by:Markes based inBridgend, UNITED KINGDOM
1/4" ID- includes PTFE ferrule- pk ...
Manufactured by:Markes based inBridgend, UNITED KINGDOM
6mm ID- includes PTFE ferrule- pk ...
Manufactured by:Markes based inBridgend, UNITED KINGDOM
1/4" ID- includes PTFE ferrule- pk ...
Manufactured by:Markes based inBridgend, UNITED KINGDOM
6mm ID- includes PTFE ferrule- pk ...
Manufactured by:Markes based inBridgend, UNITED KINGDOM
1/4" ID- includes PTFE ferrule- pk ...
Manufactured by:Markes based inBridgend, UNITED KINGDOM
6mm ID-includes PTFE ferrule- pk ...
Manufactured by:Markes based inBridgend, UNITED KINGDOM
1/4" ID- includes PTFE ferrule- pk ...
Manufactured by:Markes based inBridgend, UNITED KINGDOM
1/4" ID- includes PTFE ferrule- pk ...
Manufactured by:Markes based inBridgend, UNITED KINGDOM
1/4" ID- includes PTFE ferrule- pk ...
Manufactured by:Specac based inOrpington, UNITED KINGDOM
The Seagull is a powerful accessory for examining powders, optical coatings, opaque substrates, films on opaque substrates, and slightly curved solids by variable angle FT-IR reflectance spectroscopy. This accessory easily adapts for specular, ATR or diffuse reflectance measurements. The Seagull™ operates over a broad range of incident angles without misaligning the system, defocusing the ...
Manufactured by:ION Science Ltd. based inRoyston, UNITED KINGDOM
This robust fixed continuous VOC gas monitor has a selectable detection range of 0 – 10 ppm, 0 – 100 ppm or 0 – 1000 ppm and is ideal for use in manufacturing and process industries where VOCs are typically present. With a 4-20 mA analogue output, the fixed continuous VOC gas detector can be simply integrated into a Distributed Control System (DCS) to provide warnings and enable ...
Manufactured by:Markes based inBridgend, UNITED KINGDOM
ACTI-VOC is a robust low-flow pump for sampling vapour-phase organic compounds (VOCs) onto sorbent tubes for subsequent analysis by thermal desorption (TD). Being lightweight, easy-to-use and intrinsically safe, ACTI-VOC is ideal for personal monitoring and a wide range of other air and gas sampling ...
Manufactured by:Markes based inBridgend, UNITED KINGDOM
Diffusive body/cartridge+blank/support plate/adapter ...
Manufactured by:Markes based inBridgend, UNITED KINGDOM
Strips to suspend outdoor shelter - pk ...
Manufactured by:Markes based inBridgend, UNITED KINGDOM
pk ...
Manufactured by:Markes based inBridgend, UNITED KINGDOM
Clips for supporting plate, pk ...