Show results for
Refine by
Applications
- Process analyzers & instruments for trace carbon monoxide
- Process analyzers & instruments for trace carbon dioxide
- Process analyzers & instruments for trace hydrogen
- Process analyzers & instruments for trace methane
- Process analyzers & instruments for thin film/semiconductor/PVD
- Gas monitoring and dust monitoring for the iron / steel industry
- Gas monitoring and dust monitoring for the aluminium industry
- Water treatment solutions for cooling water treatment
- Water treatment solutions for utility water treatment
- Gas monitoring and dust monitoring for the nickel industry
- Process analyzers & instruments for CO emissions
- Process analyzers & instruments for atmospheric sampling reactive gases and CVD
- Advanced technology solutions for Ports and harbors sector
- Gas monitoring and dust monitoring for the powerplants industry
- Gas monitoring and dust monitoring for the cement industry
- Gas monitoring and dust monitoring for chemical industry
- Gas monitoring and dust monitoring for refinery industry
- Gas monitoring and dust monitoring for BFO gas (blastfurnace off gas/ combustion control)
- Gas monitoring and dust monitoring for fertilizer industry
- Gas monitoring and dust monitoring for pulp and paper industry
- Solutions for waste water treatment
- Water treatment solutions for swimming pool water treatment
- Gas monitoring and dust monitoring for the enviromental industry
- Gas monitoring and dust monitoring for the LNG industry
- Gas monitoring and dust monitoring for the natural gas industry
- Gas monitoring and dust monitoring for the refinery industry
- Gas monitoring and dust monitoring for the nuclearpower industry
- Gas monitoring and dust monitoring for the boilers
- Gas monitoring and dust monitoring for the BOF (basic oxygen furnace)
- Gas monitoring and dust monitoring for carbon black producers
- Gas monitoring and dust monitoring for the clean gases
- Gas monitoring and dust monitoring for the coke-oven gas
- Process analyzers & instruments for sulfur recovery tail gas
- Process analyzers & instruments for sulfur pit gas
Sample Processing Equipment Supplied In Norway
113 equipment items found
Premium
Manufactured by:Analytik Jena - Lab-loving people based inJena, GERMANY
CyBio Tip Magazines 1536 are designed, manufactured and quality inspected with respect to automation requirements in 1536-well formats, in turn permitting unattended, precise and highly reproducible sample ...
Premium
Manufactured by:Metrohm AG based inHerisau, SWITZERLAND
The 858 Professional Sample Processor – Pump – Injector processes samples from 500 µL to 500 mL. The sample transfer takes place either with the installed bidirectional two-channel peristaltic pump or by means of an 800 Dosino. In addition, a six-way injection valve is available for the sample ...
Premium
Manufactured by:Metrohm AG based inHerisau, SWITZERLAND
The 858 Professional Sample Processor processes samples from 500 µL to 500 mL. The sample transfer takes place either by means of a peristaltic pump on the 850 Professional IC system or with an 800 ...
Premium
Manufactured by:Analytik Jena - Lab-loving people based inJena, GERMANY
CyBio TipTrays are designed, manufactured and quality inspected with respect to automation requirements, in turn permitting unattended, precise and highly reproducible sample ...
Premium
Manufactured by:Metrohm AG based inHerisau, SWITZERLAND
The Metrosep A Supp 1 - 250/4.6 is a universal anion column that is characterized by medium capacity and special selectivity. With this column it is possible to process samples with great differences in concentrations. For example, 4 µg/L of sulfate can be determined in a solution containing 150 g/L sodium chloride. An additional advantage is that bromide ...
Manufactured by:RETSCH - part of Verder Scientific based inHaan, GERMANY
The Cross Beater Mill SK 300 is suitable for coarse and fine size reduction, either in batches or continuously. It can process medium-hard and brittle materials and is easy to operate. For increased sample discharge and for processing heat-sensitive samples, an optionally available cyclone unit unit can be used instead of the ...
Manufactured by:RETSCH - part of Verder Scientific based inHaan, GERMANY
The Rotor Beater Mill SR 300 is suitable for coarse and fine size reduction. It can process dry, soft, medium-hard, organic and inorganic substances. For increased sample discharge and for processing heat-sensitive samples, an optionally available cyclone unit can be used instead of the gravity ...
Premium
Manufactured by:Metrohm AG based inHerisau, SWITZERLAND
The 858 Professional Sample Processor – Pump processes samples from 500 µL to 500 mL. The sample transfer takes place either with the installed bidirectional two-channel peristaltic pump or with an 800 ...
Manufactured by:RETSCH - part of Verder Scientific based inHaan, GERMANY
The knife mill GRINDOMIX GM 200 is the ideal instrument for grinding and homogenizing foods and feeds. With two sharp, robust blades and a powerful 1000 W motor, it allows to process sample volumes up to 0.7 liters quickly and effectively. The GM 200 is not only ideal for homogenizing substances with a high water, oil or fat content but is also perfectly suited ...
Premium
Manufactured by:Metrohm AG based inHerisau, SWITZERLAND
The Professional IC Vario system with Metrohm's intelligent Inline Dilution and conductivity detection enables fully automatic determination of cations or anions (non-suppressed) in concentrated ...
Manufactured by:RETSCH - part of Verder Scientific based inHaan, GERMANY
Jaw crushers are always at the very front of the sample preparation chain, pre-crushing all hard and brittle materials. RETSCH jaw crushers are primarily used in laboratories and pilot plants under rough conditions but are also suitable for on-line quality control of raw materials. The RETSCH jaw crusher series is available in 8 different sizes. Throughput and final fineness ...
Premium
Manufactured by:Metrohm AG based inHerisau, SWITZERLAND
The Professional IC Vario system with Metrohm's intelligent Partial Loop Injection Technique, sequential suppression, and conductivity detection enables fully automated determination of anions and cations. "Partial Loop Injection" enables the injection of various sample ...
Manufactured by:RETSCH - part of Verder Scientific based inHaan, GERMANY
The BB 50 is the smallest model of the RETSCH jaw crusher series and has been specially designed for sample preparation in the laboratory. The compact machine fits on any laboratory bench and offers safe and convenient handling. The RETSCH jaw crusher series is available in 8 different sizes. Throughput and final fineness depend on the crusher type, selected gap width and ...
Manufactured by:RETSCH - part of Verder Scientific based inHaan, GERMANY
The Jaw Crusher BB 500 is specifically designed for accepting large feed sizes up to 110 mm. The gap width can be set stepless from 0-11 mm. Depending on the sample material, particle sizes down to 0.5 mm can be obtained in one working run, resulting in an excellent crushing ratio of 220. A throughput of up to 500 kg/h is possible with the BB 500. The RETSCH jaw crusher series is ...
Premium
Manufactured by:Metrohm AG based inHerisau, SWITZERLAND
USB Sample Processor with two workstations and two built-in membrane pumps for the automatic processing of routine samples in series with small to medium quantities. In addition to the built-in pumps, two additional pumps (membrane or peristaltic) and up to three dosing devices for Liquid Handling tasks can be connected. Because of the multitude ...
Premium
Manufactured by:Metrohm AG based inHerisau, SWITZERLAND
Entry-level model of the Robotic Titrosampler for medium sample throughput. The space-saving Robotic Sample Processor XL with integrated Titrando, one workstation, and one built-in membrane pump is expanded for application-specific automation in titration through the selection of sample rack and electrode. Either an external peristaltic pump or membrane pump can be connected for aspiration of the ...
Manufactured by:RETSCH - part of Verder Scientific based inHaan, GERMANY
The Jaw Crusher BB 600 is specifically designed for accepting large feed sizes up to 350 x 170 mm. The gap width can be set stepless from 6 - 60 mm. Depending on the sample material, particle sizes down to 6 mm can be obtained in one working run, resulting in an excellent crushing ratio of 25. A throughput of up to 3500 kg/h is possible with the BB 600. The RETSCH jaw crusher ...
Premium
Manufactured by:Metrohm AG based inHerisau, SWITZERLAND
Fully automated system for volumetric Karl Fischer water content determination in up to 24 samples. The system is controlled with OMNIS software and consists of an 814 USB Sample Processor, a 901 Titrando and extensive accessories. The samples are weighed out into the beakers, sealed to protect against humidity and placed on the rack. Before the actual titration, they are dissolved in a ...
Manufactured by:NEO Monitors - a Nederman company based inSkedsmokorset, NORWAY
The detector is not affected by pollutants and corrosive gases and does not require daily maintenance. Since there is no need for sampling pretreatment process, the measurement reliability is further improved and the error caused by the pretreatment process is eliminated. The analyzer is directly connected to the process pipe at ...
Manufactured by:RETSCH - part of Verder Scientific based inHaan, GERMANY
The Jaw Crusher BB 400 is specifically designed for accepting large feed sizes up to 220 x 90 mm. The gap width can be set stepless from 0-30 mm. Depending on the sample material, particle sizes down to 2 mm can be obtained, resulting in a crushing ratio of 50. A throughput of up to 400 kg/h is possible with the BB 400. The RETSCH jaw crusher series is available in 8 different ...