Show results for
Refine by
Electrical Engineering Equipment Supplied In Peru
17 equipment items found
Manufactured by:SERRA Maschinenbau GmbH based inRimsting, GERMANY
Therewith you can fix the log and pull it down – just like with the hydraulic equipment. Available with an 18,5 kW (electric drive) or 25 kW (petrol) engine. Stepless electric feeding system, electric height adjustment and precutter. Saw head no compromise: automatic lubrication system, manual sawblade tensioning system, ...
by:Pöyry PLC based inVANTAA, FINLAND
Pöyry provides a wide range of services for start of operations. Timely and effective implementation is the most important economic factor facing plant developers and ...
Manufactured by:SERRA Maschinenbau GmbH based inRimsting, GERMANY
As a complement for your sawmill we offer an edger with two (Duett) or four (Quartett) circular blades. Simple but strongly built. Available as a mobile or stationary machine. All fabrications are constructed from aluminium or zinc coated steel which greatly reduces the risk of stainings and increases the working life.The mobile version is easy to set up and use. Contractors will often rent out ...
Manufactured by:Lamor Corporation Ab based inPorvoo, FINLAND
The Power pack represents a light-weight, easily portable power solution for hydraulic equipment that can be operated in remote locations. The LPP 6 C75 is equipped with a 5.4 kW (7.2 hp) air-cooled single-cylinder diesel engine. An electric start is standard with a manual start as a back-up. The LPP 6 C75 has a single hydraulic circuit. The hydraulic flow is ...
Manufactured by:Lamor Corporation Ab based inPorvoo, FINLAND
The power pack represents a light-weight, easily portable power solution for hydraulic equipment that can be operated in remote locations. The LPP 7 C75 is equipped with a 7.3 kW (9.7 hp) air-cooled single-cylinder diesel engine. An electric start is standard with a manual start as a back-up. The LPP 7 C75 has a single hydraulic circuit. The hydraulic flow is ...
by:Pöyry PLC based inVANTAA, FINLAND
Pöyry has developed special tools for project planning purposes that are also widely used in the development stage, especially for optimisation of thermal steam and combined cycle ...
Premium
Manufactured by:Finn Corporation based inFairfield, OHIO (USA)
The Finn MBL1 material blower is our most compact, entry-level soil and mulch blower designed for contractors and landscapers ready to move on from the manual labor of wheelbarrows and hand spreading. Built specifically for residential and light commercial mulch projects, the MBL1 gives you professional-quality mulching in a simplified, cost-effective package that brings our dependable Finn ...
Premium
Manufactured by:Finn Corporation based inFairfield, OHIO (USA)
The FINN B40 brings mulching ease to small landscaping operations. You save time and energy by eliminating tedious and time consuming hand mulching, and the quality and coverage are far superior to that of traditional methods. Using the B40 Straw Blower can guarantee a faster and more uniform growth over larger areas. And because the unit is both self-powered and portable, it’s easy for you ...
Premium
Manufactured by:Acme Engineering Prod. Ltd. based inMount-Royal, QUEBEC (CANADA)
ACME Electric Steam Superheaters are available for use with steam boilers as auxiliary pieces of equipment. Our superheaters are all custom-made and built to meet the specific design requirements of each application. A superheater increases the temperature of the steam but does not increase the latent heat of evaporation. This means that heating with superheated steam is similar to heating with ...
Manufactured by:AMS, Inc. based inAmerican Falls, IDAHO (USA)
This model can be mounted on most standard UTV units that meet the standard weight limits. The 9110 Ag-Probe is powered by a self-contained 13 HP Honda Gas Engine with Electric Start. This model was designed for the user in mind with a collapsible mast to have a transport height of 80 inches to be able to fit inside most enclosed ...
Manufactured by:Singer, a Mueller Brand based inKimball, TENNESSEE (USA)
The 106-RPS-RR and 206-RPS-RR surge anticipating relief on rate of rise valves are based on the 106-PG or 206-PG main valve. The valve is installed downstream of the pump check valve(s) and has two pilots, the 81-RP and the 81-RPD. Both pilots sense pressure through a connection to the header pipe. The 81-RP high pressure pilot acts as a standard relief pilot, opening on excessive pressure. The ...
Manufactured by:Eggersmann GmbH based inWardenburg, GERMANY
The Aero-Separator W7 is the new development in the field of mobile Aero-Separators for compost and biomass. For the first time, this Aero-Separator disposes of an own infeed hopper. This allows an operation of the Aero-Separator independent of the Trommel screen. Materials, which have already been screened such as compost overflows, can be directly separated with the ...
Manufactured by:Eggersmann GmbH based inWardenburg, GERMANY
The Trommel screen DT5 is the perfect combination between a 2- and a 3-fraction Trommel screen. With this machine, you can change the number of fractions by a simple Trommel change and thus cover even more tasks and fields of ...
Manufactured by:Eggersmann GmbH based inWardenburg, GERMANY
The Trommel screening machine T4 is the most powerful screening machine in the compact class. Terra Select has compressed the technical advantages of the larger machines and transferred them to the T4. So you can find in the T4, the special hopper drive, a large diesel engine, galvanized conveyor frames, wide transfer points and conveyor belts. These features and the Trommel diameter of 1.600 mm ...
Manufactured by:Eggersmann GmbH based inWardenburg, GERMANY
The Lock-washer screen S5 is the ideal partner for high throughput rages when processing biomass, wood chips, compost. In this connection, the S5 screens two fractions with a clean cut. ...
Manufactured by:Singer, a Mueller Brand based inKimball, TENNESSEE (USA)
The 106-RPS-L&H and 206-RPS-L&H anticipating surge relief valves are based on the 106-PG or 206-PG main valve. The valve is mounted in a tee, downstream of the pump check valve(s). It is designed to anticipate surges to avoid the severe water hammer often associated with power failure ...
Manufactured by:Presona AB based inTomelilla, SWEDEN
Presona Model K - A Robust Compactor With a Long Lifespan. Our model K compactor is developed to withstand heavy and difficult operating conditions and can work around the clock. The compactor is robustly designed and we have placed great emphasis on making the machine both easy to use and service. All electrical and hydraulic components are carefully selected to provide the best operational ...