Refine by
Applications
- Channel Networks solutions for Seepage Water
- Channel networks solutions for replacement of measurement with inverted syphon sector
- Channel Networks - Fix Installation Measurements for hybrid flow measurement in main collector sector
- Channel Networks - Fix Installation Measurements for no shutting down the flow areas
- Channel Networks - Fix Installation Measurements for Flow Measurement In Pipe That Could Not Be Shut Down
- Multiprobes for Surface Water
- Multiprobes for Harmful Algal Bloom
- Multiprobes for Coastal
- Multiprobes for Stormwater
- Multiprobes for Aquaculture
- Multiprobes for Sourcewater
- Multiprobes for Groundwater
- Multiprobes for Dye Tracing
- Multiprobes for Dredging
- Multiprobes for Multiprobes for Dredging
- Multiprobes for Wastewater
- Multiprobes for Oil & Gas
- Multiprobes for Early Warning
- Laboratory and industrial ovens and furnaces solutions for research / university industry
- Solutions for waste water treatment
- Laboratory and industrial ovens and furnaces solutions for electronics industry
- Laboratory and industrial ovens and furnaces solutions for materials research sector
- Laboratory and industrial ovens and furnaces solutions for automotive industry
- Soil sampling and drilling solutions for agriculture industry
- Pressure sensor for Machine and plant construction
- Laboratory and industrial ovens and furnaces solutions for aerospace industry
- Monitors, gas analyzers solutions for ISO 14644-1/2: 2015 insights & solutions
- Hose and tube pumps for Food and beverage industry
- Meteorological sensors for traffic weather sector
- Solutions for water treatment and water disinfection industry
- Water treatment solutions for utility water treatment
- Pressure sensor for Shipbuilding & marine industry
- Premium gas generators and calibration solutions for gas chromatography (GC) sector
- Laboratory and industrial ovens and furnaces solutions for ceramics / glass industry
- Application package FLUXANA Cement, Raw Meal, Clinker
- Application package FLUXANA RAW-PROF
- Application package FLUXANA Glass
- Application package FLUXANA Continous Casting Powder
- Application package FLUXANA RAW- Glass
- Application package FLUXANA Ferro
- Application package FLUXANA Silicon Carbide
- Application package FLUXANA Slag
- Pressure sensor for Water supply
- Industrial Waste Shredders for Waste to energy
- Water treatment solutions for swimming pool water treatment
- Meteorological sensors for solar monitoring industry
- Water monitoring instruments for surface water monitoring
- Hose and tube pumps for Printing & packaging industry
- Hose and tube pumps for Original equipment manufacture
- Monitors, gas analyzers solutions for semiconductor / microelectronics sector
- Continuous emissions monitoring solutions for sulfuric acid production plants
- Air pollution, emission and process monitoring systems for agriculture
- Continuous emissions monitoring solutions for brick plants
- Continuous emissions monitoring solutions for power plants
- Air pollution, emission and process monitoring systems for metals
- Flame Photometer for Measurement of Lithium Sea Water
- Flame Photometer for Determination of Na in Biodiesel using Dry Decomposition for Sample Preparation
- Continuous emissions monitoring solutions for chemical industry
- Continuous Emissions Monitoring solutions for flue gas treatment industry
- Meteorological sensors for aviation weather sector
- Pressure Sensor for Ground and surface water
- Flame Photometer for Measurement of Na, K and Ca in Plant Extracts
- Flame Photometer for Measurement of Potassium and Sodium in Wine
- Gas detectors for the manufacturing industry
- Air pollution, emission and process monitoring systems for minerals
- Continuous emissions monitoring for glass manufacturing industries
- Water treatment solutions for cooling water treatment
- Continuous emissions monitoring solutions for waste to energy plants
- High-end baling and waste compacting solutions for print and plastic waste sector
- Laboratory and industrial ovens and furnaces solutions for food/feed industry
- Environmental solutions for the refining and petrochemical industry
- Continuous emissions monitoring for aluminium smelters
- On-Line gas, particulate analyzers, flow monitors, data acquisition for combustion
- On-Line gas,particulate analyzers, flow monitors, data acquisition for cement plants
- On-Line gas,particulate analyzers, flow monitors, data acquisition for glass works
Xprt Equipment Supplied In Poland
13,902 equipment items found
Showcase
Manufactured by:LNI Swissgas based inVersoix, SWITZERLAND
POLLUCE is designed to satisfy the needs of all LCMS brand on the market. It makes use of Pressure Swing Adsorption technology (PSA), through the use of specific selected molecular sieves (CMS), enable to obtain extremely pure nitrogen, this technologies reduced risk of gas contamination and ...
Showcase
Manufactured by:LNI Swissgas based inVersoix, SWITZERLAND
H2 POWER 10L is a system able to provide up to 1Nm3/h of hydrogen. The hydrogen is produced from three Hydrogen Generators “6920.16.330” connected in parallel mode. 6920.16.330 uses an electrolytic cell with polymeric membrane (PEM) to produce pure hydrogen from distilled water. No acid or alkaline solutions are used. It is provided with an internal 1.1 litres tank with electronic ...
Showcase
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
The device is used to monitor and record the quality of the SF6 gas in a gas compartment. The following quality parameters can be determined with only one measurement: SF6 volume percentage (%). Moisture concentration (°C atmosphere, °C pressure, °F atmosphere, °F pressure, ppmv, ppmw). SO2-Concentration ...
Showcase
Manufactured by:Analytik Jena - Lab-loving people based inJena, GERMANY
Quality is the difference: Unique application diversity (TS, TC, TX, TOC, TIC, EC, AOC). Low maintenance and low operating costs. Fully automated solids sampler with high sample ...
Showcase
Manufactured by:BUCHI based inFlawil, SWITZERLAND
Pre-incineration unit for ash determination. The Wet Digester B-440 is an ecological pre-incineration unit for ash determination in different sample types. Select from a wide temperature range of up to 600 °C for more flexibility. Improve reproducibility with programmable incineration ...
Showcase
Manufactured by:Mass Flow Online B.V. based inRuurlo, NETHERLANDS
MASS‑STREAM MS‑105 up to 50 ln/min, with integrated TFT display. 6 gases pre‑installed: Air, N₂, O₂, Ar, CH₄, CO₂. Direct inline CTA sensor (no bypass). Rugged IP65 design, very low pressure drop, excellent repeatability, and low sensitivity to humidity or ...
Showcase
Manufactured by:C&G Evaporator based inRignano S.Arno (Firenze), ITALY
High quality condensate. Energy consumption is reduced to a minimum by using a heat pump in a vacuum. With an absolute pressure of ≈ 33 mbar in the boiling chamber, evaporations occurs at very low temperatures (≈ 35 ºC). Volumes treated 150 – 30,000 litres/day. Volumes processed 150 – 30,000 ...
Showcase
Manufactured by:ENVEA based inPoissy, FRANCE
CAI PAS Sense analyzers use photoacoustic infrared technology to measure many of the most commonly measured IR-absorbing gases. Gas selectivity is achieved through the use of optical filters that provide both a means of detecting the gas of interest and compensating for interfering gases and water. Both bench-top and rack-mounted PAS configurations are ...
Showcase
Manufactured by:Weda Robotics based inSödertälje, SWEDEN
YT-600 is a remote controlled vehicle for sediment (sludge) removal in all sorts of reservoirs'. The powerful on-board submersible pump and wide nozzle allows for efficient cleaning of large bottom surfaces. The sediment is pumped through a hose to a seleceted discharge point or to a filter. Traditional cleaning after draining and then removal of the sediment requires the reservoir to be taken ...
Premium
Manufactured by:LNI Swissgas based inVersoix, SWITZERLAND
MODULO SINGLE benches are designed for gas mixing systems that require space for heavy gas bottles. Standard MODULO bench with options for various dimensions and models are available, all easy to configure with a modular design to meets user needs. The benches are equipped with chemical resistant top, sturdy wheels for easy moving of the system, for rock solid stability of the bench. MODULO ...
Premium
Manufactured by:LNI Swissgas based inVersoix, SWITZERLAND
The HydroGen series HG 4U PRO is able to generate 2000 cc/min of Hydrogen with purity better than 99.99999% and pressure up to 16 bar (232 PSI). The HG 4U PRO includes an electrolytic cell with polymeric membrane (PEM) using distilled water. The two-column PSA drying system with automatic regeneration ensures the maximum grade of hydrogen purity, and is completely maintenance-free. The HG 4U PRO ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
The NIRFlex N-500 is the modular FT-NIR spectrometer that you need for reliable results for QC, R&D in applied science and various industries. The NIRFlex N-500 offers a wide range of measuring cells and accessories for flexible performance. ...
Premium
Manufactured by:LNI Swissgas based inVersoix, SWITZERLAND
The Sonimix 2130 NOx converter tester has been designed to generate a stable NO2 concentration with a small reaction time. It is based on the sonic nozzles technology (ISO 6145-6 technology) and high stability pressure regulators. The NOx converter tester is often used together with a multi-steps gas divider also based on sonic nozzles and high precision pressure regulators. In order to validate ...
Premium
Manufactured by:LNI Swissgas based inVersoix, SWITZERLAND
The NitroGen series NGA CASTORE XL iQ are Membrane Nitrogen and dry air Generators. They are engineered to transform standard compressed air into a safe, regulated supply of Nitrogen up to 40 L/min with a purity up to 99.8%. A channel can provide up to 60 L/min of compressed, dry and regulated air. This NGA series is equipped with a scroll built-in oil less compressor with inverter technology. ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
The efficient way of cooling: The efficient way of cooling during evaporation, extraction or Kjeldahl comes courtesy of the Recirculating Chiller F-305 / F-308 / F-314. Combine with the Rotavapor® R-300 to gain more automation, more accuracy and more energy and time ...
Premium
Manufactured by:LNI Swissgas based inVersoix, SWITZERLAND
The Z5 zero air generator perform in 24/7 production process worldwide with utmost reliability. Even under the most challenging environments Z5s guarantee frictionless industrial use for different applications (example: high power UV-lasers (>300 nm)).The Generator produces a continuous flow of hydrocarbon-free air. The flow is controlled stable. All Generators reduce the total quantity of ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
Introducing the Lyovapor™ L-210, equipped with our cutting-edge EcoStream™ and Infinite-Control™ technologies. The timesaving Lyovapor™ L-210 sets new efficiency standards while maintaining exceptional, reliable, and stable cooling performance. Designed with advanced automation and flexibility, the Lyovapor™ line not only reduces drying time but also minimizes ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
Convenient and efficient rotary evaporation. The Rotavapor® R-300 meets the highest expectations of convenience and versatility in rotary evaporation. Its modular design allows the R-300 to be extended to a fully integrated system where a central interface regulates each ...
Premium
Manufactured by:LNI Swissgas based inVersoix, SWITZERLAND
The BEAM 1.0 performs in 24/7 production process worldwide with utmost reliability. Even under the most challenging environments Beam 1.0 guarantee frictionless industrial use for different applications (example: high power UV-lasers (>300 nm)). The Generator produces a continuous flow of hydrocarbon-free air. The flow is controlled stable. All Generators reduce the total quantity of ...
Premium
Manufactured by:LNI Swissgas based inVersoix, SWITZERLAND
The multigas Sonimix 6000 C2 calibrator is designed to calibrate manually or by remote control up to 6 monitors installed in an air pollution monitoring station, for parameters such as SO2, HC, BTX, CO, NOx and O3. The Sonimix 6000 C2 includes Mass Flow Controllers, GPT, ozone and self re-generable zero air generator and is equipped with – an inlet for high concentration mixtures of diluted ...