Show results for
Refine by
Fine Bubble Diffuser Equipment Supplied In Poland
21 equipment items found
Manufactured by:Salher based inMadrid, SPAIN
The fine bubble diffusers DBF manufactured by Salher are composed of two PVC tubes connected to a “t” piece. An EPDM membrane develops around the tubes that diffuse the air distributed inside. The micro-cuts of the membrane work as a valve which releases the air under pressure and closes to the passage of water. As a ...
Manufactured by:Mena Water FZC based inSharjah, UNITED ARAB EMIRATES
Fine bubble diffusers are mainly used for oxygen transfer into biological wastewater treatment. These products can also be used for any kind of transfer of gases into liquids. Diffusers are fixed at the bottom of aeration tanks to produce a huge number of very fine air bubbles. The air ...
Manufactured by:Aquaconsult Anlagenbau GmbH based inTraiskirchen, AUSTRIA
The AEROSTRIPc is the high end product among the diffusers. It was designed as a fine-bubble diffuser with extremely low energy requirements and has been used in both municipal and industrial wastewater treatment plants worldwide since 1995. The diffuser body is made of high-alloy, corrosion-resistant stainless ...
Manufactured by:Aquaconsult Anlagenbau GmbH based inTraiskirchen, AUSTRIA
The AEROSTRIP Type Q is one of the most powerful diffusers on the market. It was designed as a fine-bubble diffuser with extremely low energy requirements and has been used in both municipal and industrial wastewater treatment plants worldwide since 2005. The basic body of the AEROSTRIPs is made of high-quality PVC. Polyurethane ...
Manufactured by:Kamps s.a. based inBattice, BELGIUM
The air diffusers are world wide known to have a good aeration efficiency. This bottom aeration technique has also mixing capacities for the activated sludge in biological tanks with great depths. Air diffusers can be installed in both urban and industrial waste water treatment ...
Manufactured by:SFA enviro - Europelec - Aquaturbo based inParis, FRANCE
Polypropylene feeder for grids in bioreactors and degreasing tanks. Suitable for both municipal and industrial wastewater treatment plants. Allows the installation of Aquadisc® 250 / 305 / 320 and Aquatube® 70 diffusers. Diffusers are known for their excellent temperature resistance, recyclability, and ...
Manufactured by:SFA enviro - Europelec - Aquaturbo based inParis, FRANCE
Diffusers designed for aeration of activated sludge basins and tanks in Municipal and Industrial wastewater treatment plants. Quick and easy to assemble by Rotating Diffusers clockwise into Screwed connection. Designed to give optimum ...
Manufactured by:SFA enviro - Europelec - Aquaturbo based inParis, FRANCE
Increase the transfer air / liquid and avoid the phenomenon of coalescence. The AQUADISC 250 fine bubble air diffuser distributes the bubbles over the whole membrane surface to increase air/liquid transfer and to avoid coalescence. It is mostly used for aerating and oxygenating activated sludge tanks at municipal or industrial ...
Manufactured by:Salher based inMadrid, SPAIN
WWTP by low-load activated sludge (extended aeration) with settling tank, blower, fine bubble diffusers and sludge recirculation system for small, medium and large ...
Manufactured by:Mena Water FZC based inSharjah, UNITED ARAB EMIRATES
Fine bubble diffusers are mainly used for oxygen transfer into biological wastewater treatment. These products can also be used for any kind of transfer of gases into liquids. Diffusers are fixed at the bottom of aeration tanks to produce a huge number of very fine air bubbles. The air ...
Manufactured by:Salher based inMadrid, SPAIN
This GFRP equipment has an oxygen supply system and an equalization of the mixed liquor through a compressor and a fine bubble diffusers grid in EPDM, a fixed bed of plastic material, for fixation and growth of the biomass, a system of recirculation of activated sludge through Airlift and a secondary settling tank. The electrical panel board is ...
Manufactured by:Salher based inMadrid, SPAIN
The treatment plant for low-load activated sludge (extended aeration) with settling tank, compressor, diffuser grid and sludge recirculation system CHC-OXIREC-C is used to treat water of medium and large populations, to remove 80% to 90% organic matter (BOD5). This equipment in GFRP includes a system of oxygen supply and equalization of the mixed liquor through compressor and ...
Manufactured by:Esmil Group based inElk, POLAND
Esmil Fiber Tube Diffusers are reliable, efficient, and maintenance-free. They offer exceptional oxygen transfer efficiency, long-lasting performance, and easy installation with minimal capital investment. Esmil's innovative Fiber Technology integrates the fine bubble efficiency with the durability of coarse bubble ...
Manufactured by:Salher based inMadrid, SPAIN
Salher biological treatments for the removal of organic matter by moving bed biofilm reactor (MBBR) consist in reactor with cylindrical shape and horizontal or vertical design in ...
Manufactured by:Salher based inMadrid, SPAIN
WWTP for small populations. The low-load activated sludge treatment plant (extended aeration) with high-efficiency fixed culture CVC-OXIDEP-TC is usually used to treat the water of small towns and is certified according to EN 12566-3 ...
Manufactured by:Salher based inMadrid, SPAIN
The compact pretreatment plant (PPC) is a compact dewatering and degreasing plant for the filtration or screening of solids, the elimination of fine solids with a size between 0.25-3 mm, the elimination of sands and dense solids and the elimination of oils and grease. It can incorporate a helical screw screen (PPC-TAHEL AND PPC-TAHEL-D) or a rotary drum sieve (PPC-TARO AND ...
Manufactured by:Noardling B.V. based inSneek, NETHERLANDS
We have extensive knowledge and experience, and a strong track record in this field. For more than half a century we have designed, manufactured, supplied, installed and maintained fine bubble aeration systems as well as surface aeration systems. These include low speed surface aeration impellers and horizontal brush aerators. As a prominent manufacturer of ...
Manufactured by:SFA enviro - Europelec - Aquaturbo based inParis, FRANCE
This product is designed to descale fine bubble membrane diffusers by injecting formic acid to their internal surface. This operation is required when an increase in head loss is observed and to significantly reduce calcium carbonate deposits (carbonation) in the ...
Manufactured by:SFA enviro - Europelec - Aquaturbo based inParis, FRANCE
The removable aeration ramp is a solution to bring oxygen to effluent by fine air bubbles whatever the depth of the basin. These ramps are ideal to overcome an emergency oxygen deficit following a breakdown or an increase in the volume of effluent to be ...
Manufactured by:Aquaconsult Anlagenbau GmbH based inTraiskirchen, AUSTRIA
Welded Manifolds are the modern Plug&Play solution for supplying the AEROSTRIP with air. Depending on the requirements of the aeration system and the reactor geometry, the AEROSTRIP manifolds are delivered custom-made. This enables easy and quick ...