Refine by
Applications
- Channel Networks solutions for Seepage Water
- Channel networks solutions for replacement of measurement with inverted syphon sector
- Channel Networks - Fix Installation Measurements for hybrid flow measurement in main collector sector
- Channel Networks - Fix Installation Measurements for no shutting down the flow areas
- Channel Networks - Fix Installation Measurements for Flow Measurement In Pipe That Could Not Be Shut Down
- Multiprobes for Surface Water
- Multiprobes for Harmful Algal Bloom
- Multiprobes for Coastal
- Multiprobes for Stormwater
- Multiprobes for Aquaculture
- Multiprobes for Sourcewater
- Multiprobes for Groundwater
- Multiprobes for Dye Tracing
- Multiprobes for Dredging
- Multiprobes for Multiprobes for Dredging
- Multiprobes for Wastewater
- Multiprobes for Oil & Gas
- Multiprobes for Early Warning
- Laboratory and industrial ovens and furnaces solutions for research / university industry
- Solutions for waste water treatment
- Laboratory and industrial ovens and furnaces solutions for electronics industry
- Laboratory and industrial ovens and furnaces solutions for materials research sector
- Laboratory and industrial ovens and furnaces solutions for automotive industry
- Soil sampling and drilling solutions for agriculture industry
- Pressure sensor for Machine and plant construction
- Laboratory and industrial ovens and furnaces solutions for aerospace industry
- Monitors, gas analyzers solutions for ISO 14644-1/2: 2015 insights & solutions
- Hose and tube pumps for Food and beverage industry
- Meteorological sensors for traffic weather sector
- Solutions for water treatment and water disinfection industry
- Water treatment solutions for utility water treatment
- Pressure sensor for Shipbuilding & marine industry
- Premium gas generators and calibration solutions for gas chromatography (GC) sector
- Laboratory and industrial ovens and furnaces solutions for ceramics / glass industry
- Application package FLUXANA Cement, Raw Meal, Clinker
- Application package FLUXANA RAW-PROF
- Application package FLUXANA Glass
- Application package FLUXANA Continous Casting Powder
- Application package FLUXANA RAW- Glass
- Application package FLUXANA Ferro
- Application package FLUXANA Silicon Carbide
- Application package FLUXANA Slag
- Pressure sensor for Water supply
- Industrial Waste Shredders for Waste to energy
- Water treatment solutions for swimming pool water treatment
- Meteorological sensors for solar monitoring industry
- Water monitoring instruments for surface water monitoring
- Hose and tube pumps for Printing & packaging industry
- Hose and tube pumps for Original equipment manufacture
- Monitors, gas analyzers solutions for semiconductor / microelectronics sector
- Continuous emissions monitoring solutions for sulfuric acid production plants
- Air pollution, emission and process monitoring systems for agriculture
- Continuous emissions monitoring solutions for brick plants
- Continuous emissions monitoring solutions for power plants
- Air pollution, emission and process monitoring systems for metals
- Flame Photometer for Measurement of Lithium Sea Water
- Flame Photometer for Determination of Na in Biodiesel using Dry Decomposition for Sample Preparation
- Continuous emissions monitoring solutions for chemical industry
- Continuous Emissions Monitoring solutions for flue gas treatment industry
- Meteorological sensors for aviation weather sector
- Pressure Sensor for Ground and surface water
- Flame Photometer for Measurement of Na, K and Ca in Plant Extracts
- Flame Photometer for Measurement of Potassium and Sodium in Wine
- Gas detectors for the manufacturing industry
- Air pollution, emission and process monitoring systems for minerals
- Continuous emissions monitoring for glass manufacturing industries
- Water treatment solutions for cooling water treatment
- Continuous emissions monitoring solutions for waste to energy plants
- High-end baling and waste compacting solutions for print and plastic waste sector
- Laboratory and industrial ovens and furnaces solutions for food/feed industry
- Environmental solutions for the refining and petrochemical industry
- Continuous emissions monitoring for aluminium smelters
- On-Line gas, particulate analyzers, flow monitors, data acquisition for combustion
- On-Line gas,particulate analyzers, flow monitors, data acquisition for cement plants
- On-Line gas,particulate analyzers, flow monitors, data acquisition for glass works
Xprt Equipment Supplied In Poland
13,892 equipment items found
Showcase
Manufactured by:Analytik Jena - Lab-loving people based inJena, GERMANY
Quality is the difference: Unique application diversity (TS, TC, TX, TOC, TIC, EC, AOC). Low maintenance and low operating costs. Fully automated solids sampler with high sample ...
Showcase
Manufactured by:ENVEA based inPoissy, FRANCE
CAI PAS Sense analyzers use photoacoustic infrared technology to measure many of the most commonly measured IR-absorbing gases. Gas selectivity is achieved through the use of optical filters that provide both a means of detecting the gas of interest and compensating for interfering gases and water. Both bench-top and rack-mounted PAS configurations are ...
Showcase
Manufactured by:Mass Flow Online B.V. based inRuurlo, NETHERLANDS
MASS‑STREAM MS‑105 up to 50 ln/min, with integrated TFT display. 6 gases pre‑installed: Air, N₂, O₂, Ar, CH₄, CO₂. Direct inline CTA sensor (no bypass). Rugged IP65 design, very low pressure drop, excellent repeatability, and low sensitivity to humidity or ...
Showcase
Manufactured by:BUCHI based inFlawil, SWITZERLAND
Pre-incineration unit for ash determination. The Wet Digester B-440 is an ecological pre-incineration unit for ash determination in different sample types. Select from a wide temperature range of up to 600 °C for more flexibility. Improve reproducibility with programmable incineration ...
Showcase
Manufactured by:LNI Swissgas based inVersoix, SWITZERLAND
H2 POWER 10L is a system able to provide up to 1Nm3/h of hydrogen. The hydrogen is produced from three Hydrogen Generators “6920.16.330” connected in parallel mode. 6920.16.330 uses an electrolytic cell with polymeric membrane (PEM) to produce pure hydrogen from distilled water. No acid or alkaline solutions are used. It is provided with an internal 1.1 litres tank with electronic ...
Showcase
Manufactured by:Weda Robotics based inSödertälje, SWEDEN
YT-600 is a remote controlled vehicle for sediment (sludge) removal in all sorts of reservoirs'. The powerful on-board submersible pump and wide nozzle allows for efficient cleaning of large bottom surfaces. The sediment is pumped through a hose to a seleceted discharge point or to a filter. Traditional cleaning after draining and then removal of the sediment requires the reservoir to be taken ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
The SFC-660 system, developed by Sepiatec, represents a powerful solution for preparative separations by means of supercritical fluid chromatography (SFC). The unit has been designed for flow rates of up to 660 ml/min at a modifier portion of 40 %. All the advantages of SFC technology are combined: Quick separation, a reduced consumption of organic solvents and thus cost, increased safety and an ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
Synchronized sample solutions. Our parallel evaporation instruments offer synchronized sample solutions in two configurations: SyncorePlus Analyst lets you evaporate samples to a specified volume as a pre-analytical step. SyncorePlus Polyvap enables the highest sample ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
For innovative microbeads and microcapsules. The Encapsulator B-390 / B-395 is a versatile system for encapsulation of active ingredients and materials for R&D purposes. From pharma to food samples, the adaptability of the device lets you obtain innovative microbeads and ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
First lab Freeze Dryer for continuous sublimation. With Infinite-Technology, the Lyovapor™ L-300 is the first lab freeze dryer for continuous sublimation thanks to two alternately working condensers that are automatically cleaned. In addition, control the entire process remotely via mobile devices. ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
The Melting Point M-565 for the automatic determination of melting and boiling points is designed for true, professional quality control. It includes a color display to observe the phase transition, is equipped with a video camera and a video replay function which allows reviewing the melting and boiling point ...
Premium
Manufactured by:LNI Swissgas based inVersoix, SWITZERLAND
NGA CASTORE XL iQ MPAES is a Nitrogen Generator with Membrane technology. It is engineered to transform standard compressed air into a safe, regulated supply of Nitrogen up to 40 L/min with a purity up to 99.95% plus a second outlet of dry and clean air. A special carbon filter is used to remove VOC. The CASTORE XL iQ MPAES with its dual Nitrogen and Air outlets has been developed to meet ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
All that is essential for process control. Closely monitoring basic parameters such as moisture, fat or protein is crucial to correct deviations in manufacturing processes. The X-Sential™ has been developed and designed as the most cost-efficient, fit-for-purpose process ...
Premium
Manufactured by:LNI Swissgas based inVersoix, SWITZERLAND
The multigas Sonimix 6000 C2 calibrator is designed to calibrate manually or by remote control up to 6 monitors installed in an air pollution monitoring station, for parameters such as SO2, HC, BTX, CO, NOx and O3. The Sonimix 6000 C2 includes Mass Flow Controllers, GPT, ozone and self re-generable zero air generator and is equipped with – an inlet for high concentration mixtures of diluted ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
The NIRFlex N-500 is the modular FT-NIR spectrometer that you need for reliable results for QC, R&D in applied science and various industries. The NIRFlex N-500 offers a wide range of measuring cells and accessories for flexible performance. ...
Premium
Manufactured by:LNI Swissgas based inVersoix, SWITZERLAND
The Sonimix 2106 is a gas mixer mainly used to calibrate and linearize gas monitors and to generate specific gas mixtures. The Sonimix 2106 is based on the principle of gas flow through sonic nozzles and is built according the ISO 6145/6 standard. The sonic nozzle principle makes it the most accurate and stable device on the market. It generates binary mixtures from 0 to 100% in fixed steps in a ...
Premium
Manufactured by:LNI Swissgas based inVersoix, SWITZERLAND
The HydroGen series HGA RACK 19” 2U PRO is able to generate up to 600 cc/min Hydrogen with purity better than 99.99999% and pressure up to 16 bar (232 PSI). An AirGen output can deliver hydrocarbon free pure Air with a flow up to 2000 cc/min. The HGA RACK 19 inch 2U PRO includes an electrolytic cell with polymeric membrane (PEM) using distilled water. The two-column PSA drying system with ...
Premium
Manufactured by:LNI Swissgas based inVersoix, SWITZERLAND
The BEAM 2.0 performs in 24/7 production process worldwide with utmost reliability. Even under the most challenging environments BEAM 2.0 guarantee frictionless industrial use for different applications (example: high power UV-lasers (>300 nm)). The Generator produces a continuous flow of hydrocarbon-free air. The flow is controlled stable. All Generators reduce the total quantity of ...
Premium
Manufactured by:LNI Swissgas based inVersoix, SWITZERLAND
The High purity NitroGen series NG EOLO produce laboratory high grade nitrogen for most of the laboratory applications and equipments. Designed with safety and convenience in mind, this system generates purified nitrogen, eliminating the need for inconvenient cumbersome high-pressure gas cylinders. The HG EOLO removes oxygen from air to less than 10 ppm and HC pollutants to less than 0.1ppm (if ...
Premium
Manufactured by:LNI Swissgas based inVersoix, SWITZERLAND
MODULO benches are designed for GC/MS systems. Various dimensions and models are available, all easy to configure with a modular design to meet user needs. The benches are equipped with sturdy wheels for easy moving of the system, and adjustable levelling legs for rock solid stability of the bench. GC system may need quite a lot of different generators, our MODULO benches has 2 Two 13U racks ...
