Refine by
Applications
- Channel Networks solutions for Seepage Water
- Channel networks solutions for replacement of measurement with inverted syphon sector
- Channel Networks - Fix Installation Measurements for hybrid flow measurement in main collector sector
- Channel Networks - Fix Installation Measurements for no shutting down the flow areas
- Channel Networks - Fix Installation Measurements for Flow Measurement In Pipe That Could Not Be Shut Down
- Multiprobes for Surface Water
- Multiprobes for Harmful Algal Bloom
- Multiprobes for Coastal
- Multiprobes for Stormwater
- Multiprobes for Aquaculture
- Multiprobes for Sourcewater
- Multiprobes for Groundwater
- Multiprobes for Dye Tracing
- Multiprobes for Dredging
- Multiprobes for Multiprobes for Dredging
- Multiprobes for Wastewater
- Multiprobes for Oil & Gas
- Multiprobes for Early Warning
- Laboratory and industrial ovens and furnaces solutions for research / university industry
- Solutions for waste water treatment
- Laboratory and industrial ovens and furnaces solutions for electronics industry
- Laboratory and industrial ovens and furnaces solutions for materials research sector
- Laboratory and industrial ovens and furnaces solutions for automotive industry
- Soil sampling and drilling solutions for agriculture industry
- Pressure sensor for Machine and plant construction
- Laboratory and industrial ovens and furnaces solutions for aerospace industry
- Monitors, gas analyzers solutions for ISO 14644-1/2: 2015 insights & solutions
- Hose and tube pumps for Food and beverage industry
- Meteorological sensors for traffic weather sector
- Solutions for water treatment and water disinfection industry
- Water treatment solutions for utility water treatment
- Pressure sensor for Shipbuilding & marine industry
- Premium gas generators and calibration solutions for gas chromatography (GC) sector
- Laboratory and industrial ovens and furnaces solutions for ceramics / glass industry
- Application package FLUXANA Cement, Raw Meal, Clinker
- Application package FLUXANA RAW-PROF
- Application package FLUXANA Glass
- Application package FLUXANA Continous Casting Powder
- Application package FLUXANA RAW- Glass
- Application package FLUXANA Ferro
- Application package FLUXANA Silicon Carbide
- Application package FLUXANA Slag
- Pressure sensor for Water supply
- Industrial Waste Shredders for Waste to energy
- Water treatment solutions for swimming pool water treatment
- Meteorological sensors for solar monitoring industry
- Water monitoring instruments for surface water monitoring
- Hose and tube pumps for Printing & packaging industry
- Hose and tube pumps for Original equipment manufacture
- Monitors, gas analyzers solutions for semiconductor / microelectronics sector
- Continuous emissions monitoring solutions for sulfuric acid production plants
- Air pollution, emission and process monitoring systems for agriculture
- Continuous emissions monitoring solutions for brick plants
- Continuous emissions monitoring solutions for power plants
- Air pollution, emission and process monitoring systems for metals
- Flame Photometer for Measurement of Lithium Sea Water
- Flame Photometer for Determination of Na in Biodiesel using Dry Decomposition for Sample Preparation
- Continuous emissions monitoring solutions for chemical industry
- Continuous Emissions Monitoring solutions for flue gas treatment industry
- Meteorological sensors for aviation weather sector
- Pressure Sensor for Ground and surface water
- Flame Photometer for Measurement of Na, K and Ca in Plant Extracts
- Flame Photometer for Measurement of Potassium and Sodium in Wine
- Gas detectors for the manufacturing industry
- Air pollution, emission and process monitoring systems for minerals
- Continuous emissions monitoring for glass manufacturing industries
- Water treatment solutions for cooling water treatment
- Continuous emissions monitoring solutions for waste to energy plants
- High-end baling and waste compacting solutions for print and plastic waste sector
- Laboratory and industrial ovens and furnaces solutions for food/feed industry
- Environmental solutions for the refining and petrochemical industry
- Continuous emissions monitoring for aluminium smelters
- On-Line gas, particulate analyzers, flow monitors, data acquisition for combustion
- On-Line gas,particulate analyzers, flow monitors, data acquisition for cement plants
- On-Line gas,particulate analyzers, flow monitors, data acquisition for glass works
Xprt Equipment Supplied In Poland
13,898 equipment items found
Showcase
Manufactured by:BUCHI based inFlawil, SWITZERLAND
Pre-incineration unit for ash determination. The Wet Digester B-440 is an ecological pre-incineration unit for ash determination in different sample types. Select from a wide temperature range of up to 600 °C for more flexibility. Improve reproducibility with programmable incineration ...
Showcase
Manufactured by:C&G Evaporator based inRignano S.Arno (Firenze), ITALY
High quality condensate. Energy consumption is reduced to a minimum by using a heat pump in a vacuum. With an absolute pressure of ≈ 33 mbar in the boiling chamber, evaporations occurs at very low temperatures (≈ 35 ºC). Volumes treated 150 – 30,000 litres/day. Volumes processed 150 – 30,000 ...
Showcase
Manufactured by:LNI Swissgas based inVersoix, SWITZERLAND
H2 POWER 10L is a system able to provide up to 1Nm3/h of hydrogen. The hydrogen is produced from three Hydrogen Generators “6920.16.330” connected in parallel mode. 6920.16.330 uses an electrolytic cell with polymeric membrane (PEM) to produce pure hydrogen from distilled water. No acid or alkaline solutions are used. It is provided with an internal 1.1 litres tank with electronic ...
Showcase
Manufactured by:LNI Swissgas based inVersoix, SWITZERLAND
POLLUCE is designed to satisfy the needs of all LCMS brand on the market. It makes use of Pressure Swing Adsorption technology (PSA), through the use of specific selected molecular sieves (CMS), enable to obtain extremely pure nitrogen, this technologies reduced risk of gas contamination and ...
Showcase
Manufactured by:Weda Robotics based inSödertälje, SWEDEN
YT-600 is a remote controlled vehicle for sediment (sludge) removal in all sorts of reservoirs'. The powerful on-board submersible pump and wide nozzle allows for efficient cleaning of large bottom surfaces. The sediment is pumped through a hose to a seleceted discharge point or to a filter. Traditional cleaning after draining and then removal of the sediment requires the reservoir to be taken ...
Showcase
Manufactured by:Mass Flow Online B.V. based inRuurlo, NETHERLANDS
MASS‑STREAM MS‑105 up to 50 ln/min, with integrated TFT display. 6 gases pre‑installed: Air, N₂, O₂, Ar, CH₄, CO₂. Direct inline CTA sensor (no bypass). Rugged IP65 design, very low pressure drop, excellent repeatability, and low sensitivity to humidity or ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
The efficient way of cooling. BUCHI recirculating chiller versions with different performance options for your personal needs available. Remote controlled cooling allows easy operation. Very efficient distillation thanks to the complete integration of the cooling device in the evaporation ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
With the simultaneous monitoring at four different wavelengths over the whole UV and visible range, the C-640 Detector allows you to detect and isolate your compounds using the Sepacore Flash Chromatography ...
Premium
Manufactured by:LNI Swissgas based inVersoix, SWITZERLAND
The High purity NitroGen series NG RACK 5U produce laboratory high grade nitrogen for most of the laboratory applications and equipments. Designed with safety and convenience in mind, this system generates purified nitrogen, eliminating the need for inconvenient cumbersome high-pressure gas cylinders. The NG RACK 5U removes oxygen from air to less than 1 ppm and HC pollutants to less than 0.05ppm ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
Complementary and robust. If you perform acid hydrolysis as a sample preparation step for total fat determination, discover HydrolEx H-506 as a complementary and robust addition to your FatExtractor E-500 or UniversalExtractor E-800. Benefit from a smooth, safe process with convenient system ...
Premium
Manufactured by:LNI Swissgas based inVersoix, SWITZERLAND
The BEAM 3.1 perform in 24/7 production process worldwide with utmost reliability. Even under the most challenging environments BEAM 3.1 guarantee frictionless industrial use for different applications (example: 3D Laser Printer / Powder Handling). The Generator produces a continuous flow of Nitrogen with Laser Grade. The BEAM 3.1 has been developed to meet specific requirements in term of gas, ...
Premium
Manufactured by:LNI Swissgas based inVersoix, SWITZERLAND
The HydroGen series HG RACK 19“ 2U PRO is able to generate up to 600cc/min Hydrogen with purity better than 99.99999% and pressure up to 16 bar (232 PSI). The HG RACK 19 inch 2U PRO includes an electrolytic cell with polymeric membrane (PEM) using distilled water. The two-column PSA drying system with automatic regeneration ensures the maximum grade of hydrogen purity, and is completely ...
Premium
Manufactured by:LNI Swissgas based inVersoix, SWITZERLAND
The Sonimix 4001 is a stand alone ozone primary transfer standard able to generate ozone together with dry or wet air (optional) allowing to calibrate the ozone monitors in several points. It generates an outflow of 3 Nl/min air containing 10 to 1000 ppb O3, with stability and reproducibility of the concentration better than 1% relative. The extended range model generates 10 ppb to 10 ppm at 3 ...
Premium
Manufactured by:LNI Swissgas based inVersoix, SWITZERLAND
The AirGen series ZA-TOTAL-C is able to remove the total hydrocarbons to less than 0.05 ppm and other pollutant like Humidity, CO2, CO, NOx, SO2. ZA-TOTAL-C is available with a smart low noise built-in pistons compressor, 100% oil-free. The reduction of hydrocarbons, including methane, and carbon monoxide decrease the background noise level and gives much better baseline stability, considerably ...
Premium
Manufactured by:LNI Swissgas based inVersoix, SWITZERLAND
The HydroGen series HG ST PRO is able to generate up to 600 cc/min Hydrogen with purity better than 99.99999% and pressure up to 16 bar (232 PSI). The HG ST PRO includes an electrolytic cell with polymeric membrane (PEM) using distilled water. The two-column PSA drying system with automatic regeneration ensures the maximum grade of hydrogen purity, and is completely maintenance-free. The HG ST ...
Premium
Manufactured by:Metrohm AG based inHerisau, SWITZERLAND
Portable metal analyzer for the determination of heavy metals. Device version for screen-printed electrodes (SPE). The system is comprised of potentiostat and separate measuring stand with integrated stirrer and replaceable electrode. The instrument is operated with the Portable VA Analyzer software. The power is supplied via the USB connector and via the integrated rechargeable battery. The ...
Premium
Manufactured by:ProMinent GmbH based inHeidelberg, GERMANY
Output: up to 800 g/h Efficient production of the highly effective disinfectant DULCOLYT 400 with an exceptionally low chloride and chlorate content. Ideal for particularly sensitive applications in the beverage and food industry, e.g. for the production of baby food. Maximum protection against corrosion and very good cost ...
Premium
Manufactured by:Metrohm AG based inHerisau, SWITZERLAND
The Professional IC Vario system with Metrohm's intelligent inline preconcentration technique, Inline Matrix Elimination, sequential suppression, and conductivity detection enables ultratrace analysis down to the lowest ppt range (ng/L) of anions or cations in complex ...
Premium
Manufactured by:Metrohm AG based inHerisau, SWITZERLAND
SpectroECL combines in one equipment a biopotentiostat/galvanostat and a microspectrometer integrated in an innovative cell for Screen-Printed Electrodes. This miniaturized and portable alternative is perfect for performing Electrogenerated ChemiLuminescence (ECL) ...
Premium
Manufactured by:Metrohm AG based inHerisau, SWITZERLAND
μStat 300 is a portable BiPotentiostat that can be applied for Voltammetric or Amperometric measurements and can be used with one- or two-working electrodes configuration. Li-ion Battery powered, it can be easily connected to a PC via USB and ...