Refine by
Applications
- Channel Networks solutions for Seepage Water
- Channel networks solutions for replacement of measurement with inverted syphon sector
- Channel Networks - Fix Installation Measurements for hybrid flow measurement in main collector sector
- Channel Networks - Fix Installation Measurements for no shutting down the flow areas
- Channel Networks - Fix Installation Measurements for Flow Measurement In Pipe That Could Not Be Shut Down
- Laboratory and industrial ovens and furnaces solutions for research / university industry
- Solutions for waste water treatment
- Laboratory and industrial ovens and furnaces solutions for electronics industry
- Laboratory and industrial ovens and furnaces solutions for materials research sector
- Laboratory and industrial ovens and furnaces solutions for automotive industry
- Laboratory and industrial ovens and furnaces solutions for aerospace industry
- Gas Mass Flow Meters, Sensors & Controllers for High Flow Gas Control
- Solutions for water treatment and water disinfection industry
- Water treatment solutions for utility water treatment
- Premium gas generators and calibration solutions for gas chromatography (GC) sector
- Laboratory and industrial ovens and furnaces solutions for ceramics / glass industry
- Application package FLUXANA Cement, Raw Meal, Clinker
- Application package FLUXANA RAW-PROF
- Application package FLUXANA Glass
- Flow Solutions for Original Equipment Manufacturers (OEM)
- Application package FLUXANA Continous Casting Powder
- Application package FLUXANA RAW- Glass
- Application package FLUXANA Ferro
- Application package FLUXANA Silicon Carbide
- Application package FLUXANA Slag
- Industrial Waste Shredders for Waste to energy
- Water sampling for the environmental industry
- Water treatment solutions for swimming pool water treatment
- Water monitoring instruments for surface water monitoring
- Continuous emissions monitoring solutions for sulfuric acid production plants
- Air pollution, emission and process monitoring systems for agriculture
- Water monitoring for the environmental industry
- Continuous emissions monitoring solutions for brick plants
- Continuous emissions monitoring solutions for power plants
- Air pollution, emission and process monitoring systems for metals
- Flow Solutions for Aerospace
- In Line Air Flow Meters for Better Facilities Managemen
- Continuous emissions monitoring solutions for chemical industry
- Continuous Emissions Monitoring solutions for flue gas treatment industry
- Water Quality Management Instruments for Textiles Industry
- Incinerator solutions for the hotel / resort sector
- Incinerator solutions for the mining / exploration sector
- Incinerator solutions for the industrial / factory waste sector
- Gas detectors for the manufacturing industry
- Air pollution, emission and process monitoring systems for minerals
- Continuous emissions monitoring for glass manufacturing industries
- Water treatment solutions for cooling water treatment
- Industrial Air Pollution Control for the Automotive and Vehicle Engineering
- Industrial Air Pollution Control for the Chemical and Petrochemical Industry
- Industrial Air Pollution Control for the Building Materials, Cement and Lime
- Industrial Air Pollution Control for the Consumer Goods Industry
- Industrial Air Pollution Control for the Electronics and Electrical Industry
- Industrial Air Pollution Control for the Energy and Resources
- Industrial Air Pollution Control for the Food Industry
- Industrial Air Pollution Control for the Pharmaceutical Industry
- Industrial Air Pollution Control for the Metals and Mining
- Industrial Air Pollution Control for the Oil and Gas
- Industrial Air Pollution Control for the Recycling and Waste Management
- Water Quality Management Instruments for Reverse Osmosis
- Continuous emissions monitoring solutions for waste to energy plants
- Laboratory and industrial ovens and furnaces solutions for food/feed industry
- Flow Solutions for Climate Change and Clean Energy
- Continuous emissions monitoring for aluminium smelters
- On-Line gas, particulate analyzers, flow monitors, data acquisition for combustion
- On-Line gas,particulate analyzers, flow monitors, data acquisition for cement plants
- On-Line gas,particulate analyzers, flow monitors, data acquisition for glass works
- Water monitoring instruments for groundwater monitoring
- Water Quality Management Instruments for Environmental Industry
- Hazardous waste incinerators for medical sector
- Large medical incinerators for hospital use
- Small medical incinerators for health clinics and labs
- Medical waste incinerators for laboratories
- Incinerator solutions for the pharmaceutical sector
- Incinerator solutions for the pathological sector
- Air pollution, emission and process monitoring systems for food & pharma
Xprt Equipment Supplied In Portugal
6,542 equipment items found
Showcase
Manufactured by:OPSIS AB based inFurulund, SWEDEN
A wide range of products are combined into customised systems. Differential Optical Absorption Spectroscopy (DOAS) is the core technology in the OPSIS product portfolio where a combination of light emitters, light receivers, optical fibres, and analysers allows the monitoring of gaseous pollutants and other substances for both emissions monitoring and process control. ...
Showcase
Manufactured by:LNI Swissgas based inVersoix, SWITZERLAND
POLLUCE is designed to satisfy the needs of all LCMS brand on the market. It makes use of Pressure Swing Adsorption technology (PSA), through the use of specific selected molecular sieves (CMS), enable to obtain extremely pure nitrogen, this technologies reduced risk of gas contamination and ...
Showcase
Manufactured by:BUCHI based inFlawil, SWITZERLAND
The next generation laboratory spray dryer. With the Mini Spray Dryer S-300, BUCHI solidifies its position as a global market leader for more than 40 years. The laboratory spray dryer combines outstanding product design with unique instrument capabilities to offer a superior user ...
Showcase
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
The device is used to monitor and record the quality of the SF6 gas in a gas compartment. The following quality parameters can be determined with only one measurement: SF6 volume percentage (%). Moisture concentration (°C atmosphere, °C pressure, °F atmosphere, °F pressure, ppmv, ppmw). SO2-Concentration ...
Showcase
Manufactured by:Mass Flow Online B.V. based inRuurlo, NETHERLANDS
Compact FLEXI‑FLOW FF‑109 (up to 50 ln/min) with 8 pre‑installed gases, 22 via FlowSuite. Fast TCS response, flow & temperature measurement, up to 16 bar(g), Bluetooth & USB‑C, compatible with free Bronkhorst ...
Showcase
Manufactured by:Myron L Company based inCarlsbad, CALIFORNIA (USA)
We are proud of the trust our handheld water quality instruments and monitor/controllers have earned in the past. Our product line has evolved to a new level of outstanding performance and value in analytical instruments: the Ultrameter II series. While priced like affordable single-parameter instruments, the Ultrameter II does the job of up to seven ...
Showcase
Manufactured by:LNI Swissgas based inVersoix, SWITZERLAND
H2 POWER 10L is a system able to provide up to 1Nm3/h of hydrogen. The hydrogen is produced from three Hydrogen Generators “6920.16.330” connected in parallel mode. 6920.16.330 uses an electrolytic cell with polymeric membrane (PEM) to produce pure hydrogen from distilled water. No acid or alkaline solutions are used. It is provided with an internal 1.1 litres tank with electronic ...
Showcase
Manufactured by:BUCHI based inFlawil, SWITZERLAND
Pre-incineration unit for ash determination. The Wet Digester B-440 is an ecological pre-incineration unit for ash determination in different sample types. Select from a wide temperature range of up to 600 °C for more flexibility. Improve reproducibility with programmable incineration ...
Showcase
Manufactured by:Stevens Water Monitoring Systems, Inc. based inPortland, OREGON (USA)
The Dyacon Meteorological Station MS-130 is a preconfigured weather monitoring device that requires no programming or specialized setup. This station is shipped with control module (data logger) with a cell module, solar panel, and the following sensors: wind and wind direction (with wind gust and direction averaging), barometric pressure, relative humidity, and ambient temperature. Other ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
Sepiatec’s SFC-M5 system is a preparative system for separating chiral and achiral samples using supercritical fluid chromatography. The system is available in the product variants M5 50 and M5 250. The SFC-M5 system consists of the main module and the collector module. Both modules form a functional unit that can be configured in a variety of ways with different equipment. The main module ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
Four steps for occupational safety. With four steps to occupational safety, Scrubber K-415 provides you with maximal protection. The unit neutralizes poisonous fumes and reaction gases and minimizes use of cooling water to safeguard both you and the ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
Maximal efficiency with up to 10 measurement points in parallel. Continuously monitor key parameters such as moisture, protein, fat, ash, starch, fiber, oil at any process step with NIR-Online Multipoint Sensor. Innovative Multipoint heads provide maximal efficiency for up to ten measurement points in parallel ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
The SFC-660 system, developed by Sepiatec, represents a powerful solution for preparative separations by means of supercritical fluid chromatography (SFC). The unit has been designed for flow rates of up to 660 ml/min at a modifier portion of 40 %. All the advantages of SFC technology are combined: Quick separation, a reduced consumption of organic solvents and thus cost, increased safety and an ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
BUCHI offers high quality laboratory equipment and selected maintenance packages to keep your system up and running with the best performance and ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
The SFC-50 from Sepiatec is a compact and easy-to-use chromatography system for preparative separations on small columns by means of supercritical fluid chromatography (SFC). The system offers the comprehensive benefits of SFC technology, such as faster separations, lower costs due to reduced consumption of organic solvents, as well as being more environmentally friendly at increased ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
NIR instrument for the harshest environments. ProxiMate™, a NIR instrument for the harshest environments, is designed for the food and feed industry. The compact system can be operated anywhere by anyone thanks to a simple interface and pre-calibration packages that ensure speed and ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
PrepPure HPLC columns are filled with high quality silica and enable the performance of high resolution separations. Easy scalability from 4.6 – 70 mm ID and phases for standard and targeted applications make PrepPure the obvious choice for best ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
All that is essential for process control. Closely monitoring basic parameters such as moisture, fat or protein is crucial to correct deviations in manufacturing processes. The X-Sential™ has been developed and designed as the most cost-efficient, fit-for-purpose process ...
Premium
Manufactured by:ProMinent GmbH based inHeidelberg, GERMANY
AEGIS X ensures that evaporation cooling systems are run as efficiently as possible. The controller is highly flexible and suited to large cooling systems with many parameters. Using digital communication options, cooling towers can be conveniently monitored and their data evaluated ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
Small particles, small samples, high yields. With the Nano Spray Dryer B-90 HP, gently process the smallest sample amounts into submicron particles with minimal product loss. The user-friendly system improves productivity in areas where small particles make a big ...