Refine by
Applications
- Channel Networks solutions for Seepage Water
- Channel networks solutions for replacement of measurement with inverted syphon sector
- Channel Networks - Fix Installation Measurements for hybrid flow measurement in main collector sector
- Channel Networks - Fix Installation Measurements for no shutting down the flow areas
- Channel Networks - Fix Installation Measurements for Flow Measurement In Pipe That Could Not Be Shut Down
- Laboratory and industrial ovens and furnaces solutions for research / university industry
- Solutions for waste water treatment
- Laboratory and industrial ovens and furnaces solutions for electronics industry
- Laboratory and industrial ovens and furnaces solutions for materials research sector
- Laboratory and industrial ovens and furnaces solutions for automotive industry
- Laboratory and industrial ovens and furnaces solutions for aerospace industry
- Gas Mass Flow Meters, Sensors & Controllers for High Flow Gas Control
- Solutions for water treatment and water disinfection industry
- Water treatment solutions for utility water treatment
- Premium gas generators and calibration solutions for gas chromatography (GC) sector
- Laboratory and industrial ovens and furnaces solutions for ceramics / glass industry
- Application package FLUXANA Cement, Raw Meal, Clinker
- Application package FLUXANA RAW-PROF
- Application package FLUXANA Glass
- Flow Solutions for Original Equipment Manufacturers (OEM)
- Application package FLUXANA Continous Casting Powder
- Application package FLUXANA RAW- Glass
- Application package FLUXANA Ferro
- Application package FLUXANA Silicon Carbide
- Application package FLUXANA Slag
- Industrial Waste Shredders for Waste to energy
- Water sampling for the environmental industry
- Water treatment solutions for swimming pool water treatment
- Water monitoring instruments for surface water monitoring
- Continuous emissions monitoring solutions for sulfuric acid production plants
- Air pollution, emission and process monitoring systems for agriculture
- Water monitoring for the environmental industry
- Continuous emissions monitoring solutions for brick plants
- Continuous emissions monitoring solutions for power plants
- Air pollution, emission and process monitoring systems for metals
- Flow Solutions for Aerospace
- In Line Air Flow Meters for Better Facilities Managemen
- Continuous emissions monitoring solutions for chemical industry
- Continuous Emissions Monitoring solutions for flue gas treatment industry
- Water Quality Management Instruments for Textiles Industry
- Incinerator solutions for the hotel / resort sector
- Incinerator solutions for the mining / exploration sector
- Incinerator solutions for the industrial / factory waste sector
- Gas detectors for the manufacturing industry
- Air pollution, emission and process monitoring systems for minerals
- Continuous emissions monitoring for glass manufacturing industries
- Water treatment solutions for cooling water treatment
- Industrial Air Pollution Control for the Automotive and Vehicle Engineering
- Industrial Air Pollution Control for the Chemical and Petrochemical Industry
- Industrial Air Pollution Control for the Building Materials, Cement and Lime
- Industrial Air Pollution Control for the Consumer Goods Industry
- Industrial Air Pollution Control for the Electronics and Electrical Industry
- Industrial Air Pollution Control for the Energy and Resources
- Industrial Air Pollution Control for the Food Industry
- Industrial Air Pollution Control for the Pharmaceutical Industry
- Industrial Air Pollution Control for the Metals and Mining
- Industrial Air Pollution Control for the Oil and Gas
- Industrial Air Pollution Control for the Recycling and Waste Management
- Water Quality Management Instruments for Reverse Osmosis
- Continuous emissions monitoring solutions for waste to energy plants
- Laboratory and industrial ovens and furnaces solutions for food/feed industry
- Flow Solutions for Climate Change and Clean Energy
- Continuous emissions monitoring for aluminium smelters
- On-Line gas, particulate analyzers, flow monitors, data acquisition for combustion
- On-Line gas,particulate analyzers, flow monitors, data acquisition for cement plants
- On-Line gas,particulate analyzers, flow monitors, data acquisition for glass works
- Water monitoring instruments for groundwater monitoring
- Water Quality Management Instruments for Environmental Industry
- Hazardous waste incinerators for medical sector
- Large medical incinerators for hospital use
- Small medical incinerators for health clinics and labs
- Medical waste incinerators for laboratories
- Incinerator solutions for the pharmaceutical sector
- Incinerator solutions for the pathological sector
- Air pollution, emission and process monitoring systems for food & pharma
Xprt Equipment Supplied In Portugal
6,542 equipment items found
Showcase
Manufactured by:Myron L Company based inCarlsbad, CALIFORNIA (USA)
We are proud of the trust our handheld water quality instruments and monitor/controllers have earned in the past. Our product line has evolved to a new level of outstanding performance and value in analytical instruments: the Ultrameter II series. While priced like affordable single-parameter instruments, the Ultrameter II does the job of up to seven ...
Showcase
Manufactured by:OPSIS AB based inFurulund, SWEDEN
A wide range of products are combined into customised systems. Differential Optical Absorption Spectroscopy (DOAS) is the core technology in the OPSIS product portfolio where a combination of light emitters, light receivers, optical fibres, and analysers allows the monitoring of gaseous pollutants and other substances for both emissions monitoring and process control. ...
Showcase
Manufactured by:Mass Flow Online B.V. based inRuurlo, NETHERLANDS
Compact FLEXI‑FLOW FF‑109 (up to 50 ln/min) with 8 pre‑installed gases, 22 via FlowSuite. Fast TCS response, flow & temperature measurement, up to 16 bar(g), Bluetooth & USB‑C, compatible with free Bronkhorst ...
Showcase
Manufactured by:BUCHI based inFlawil, SWITZERLAND
Pre-incineration unit for ash determination. The Wet Digester B-440 is an ecological pre-incineration unit for ash determination in different sample types. Select from a wide temperature range of up to 600 °C for more flexibility. Improve reproducibility with programmable incineration ...
Showcase
Manufactured by:LNI Swissgas based inVersoix, SWITZERLAND
POLLUCE is designed to satisfy the needs of all LCMS brand on the market. It makes use of Pressure Swing Adsorption technology (PSA), through the use of specific selected molecular sieves (CMS), enable to obtain extremely pure nitrogen, this technologies reduced risk of gas contamination and ...
Showcase
Manufactured by:LNI Swissgas based inVersoix, SWITZERLAND
H2 POWER 10L is a system able to provide up to 1Nm3/h of hydrogen. The hydrogen is produced from three Hydrogen Generators “6920.16.330” connected in parallel mode. 6920.16.330 uses an electrolytic cell with polymeric membrane (PEM) to produce pure hydrogen from distilled water. No acid or alkaline solutions are used. It is provided with an internal 1.1 litres tank with electronic ...
Showcase
Manufactured by:Stevens Water Monitoring Systems, Inc. based inPortland, OREGON (USA)
The Dyacon Meteorological Station MS-130 is a preconfigured weather monitoring device that requires no programming or specialized setup. This station is shipped with control module (data logger) with a cell module, solar panel, and the following sensors: wind and wind direction (with wind gust and direction averaging), barometric pressure, relative humidity, and ambient temperature. Other ...
Showcase
Manufactured by:Stevens Water Monitoring Systems, Inc. based inPortland, OREGON (USA)
The TB3 tipping bucket rain gauge features an integrated siphon mechanism designed to provide precise measurements across a wide range of rainfall intensities. Each unit comprises a collector funnel equipped with a stainless-steel leaf filter, an integrated siphon control system, an outer enclosure secured with quick-release fasteners, and a base housing the tipping bucket mechanism. The device ...
Showcase
Manufactured by:BUCHI based inFlawil, SWITZERLAND
The next generation laboratory spray dryer. With the Mini Spray Dryer S-300, BUCHI solidifies its position as a global market leader for more than 40 years. The laboratory spray dryer combines outstanding product design with unique instrument capabilities to offer a superior user ...
Showcase
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
The device is used to monitor and record the quality of the SF6 gas in a gas compartment. The following quality parameters can be determined with only one measurement: SF6 volume percentage (%). Moisture concentration (°C atmosphere, °C pressure, °F atmosphere, °F pressure, ppmv, ppmw). SO2-Concentration ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
Synchronized sample solutions. Our parallel evaporation instruments offer synchronized sample solutions in two configurations: SyncorePlus Analyst lets you evaporate samples to a specified volume as a pre-analytical step. SyncorePlus Polyvap enables the highest sample ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
Sepiatec’s SFC-M5 250 system is a preparative system for separating chiral and achiral samples using supercritical fluid chromatography. The SFC-M5 250 system consists of the main module and the collector module. Both modules form a functional unit that can be configured in a variety of ways with different equipment. The main module can be equipped with up to three high pressure pumps, a ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
The NIRFlex N-500 is the modular FT-NIR spectrometer that you need for reliable results for QC, R&D in applied science and various industries. The NIRFlex N-500 offers a wide range of measuring cells and accessories for flexible performance. ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
When a purification has to be scaled up, GlasPure offers maximum flexibility in terms of scale and separation requirements. The glass columns are designed for sample amounts over 300 g and pressure up to 50 bar (725 ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
Meet the R-80, our most energy-efficient Rotavapor® to date and the most compact Rotavapor® on the market. The R-80 is an affordable and eco-friendly solution that ensures the most efficient use of lab space while meeting BUCHI’s high-quality standards. ...
Premium
Manufactured by:ProMinent GmbH based inHeidelberg, GERMANY
5-200 g/h chlorine dioxide. Max. flow at 0.2 ppm ClO2 metering is 1,000 m3/h. Chlorine dioxide system, which continuously produces ClO2 according to the acid/chlorite method with diluted chemicals. Extremely simple operation, clear construction, analogue control, manual control or via ...
Premium
Manufactured by:ProMinent GmbH based inHeidelberg, GERMANY
Capacity 35 – 1,000 l; PE storage tanks produced in a rotation process. ProMinent metering pumps, suction lances and stirrers can all be added. The stackable PE collecting pans are available in matching ...
Premium
Manufactured by:ProMinent GmbH based inHeidelberg, GERMANY
8 – 89 g/h chlorine dioxide generation. Bello Zon® CDLb H2SO4 especially for applications critical with regard to corrosion for the production of low-chloride chlorine dioxide liquid. With the chlorine dioxide system, ClO2 is produced discontinuously following the acid / chlorite procedure. ...
Premium
Manufactured by:Aerzener Maschinenfabrik GmbH based inAerzen, GERMANY
The GMD series, made by AERZEN, is the universal gastight booster solution for the low pressure range. Equipped with a magnetic coupling, it ensures a maintenance-free sealing concept. Locking systems for sealing the drive shaft are completely eliminated and allow a low-maintenance machine concept. The separation between oil and process side is achieved by a special piston ring ...
Premium
Manufactured by:ProMinent GmbH based inHeidelberg, GERMANY
Capacity range of single-head pump: 0 – 2800 l/h, 800 – 11 bar. The high-performance plunger metering pump ORLITA PS enables precise pump capacities even at maximum pressure and temperatures of up to +400 °C. The ORLITA PS pump has a modular construction and is therefore very flexible. ...