Refine by
Xprt Equipment Supplied In Rwanda
406 equipment items found
Manufactured by:K31 Road Engineering, LLC. based inLaguna Beach, CALIFORNIA (USA)
Soil stabilization technology has evolved, there have now emerged new types of soil stabilization techniques, many of which are classified as “green technologies”. Road construction using soil stabilization. No need for lime stabilization, lime-treated soil, or cement soil stabilization. Dirt is probably the cheapest and simplest construction material out there, but it’s not ...
Manufactured by:Kamps s.a. based inBattice, BELGIUM
For more than 25 years now, KAMPS has produced and installed several brush aerators. This type of aerator is the ideal solution to aerate, mix and circulate waste water in low depth tanks and little oxidation ditches. KAMPS offers two different solutions in terms of diameter, 1m and 0.75m in order to be able to adapt the system to every project. Afterwise, the length and submergence are crucial ...
Manufactured by:Kamps s.a. based inBattice, BELGIUM
The lamella separator is a compact solution for efficient separation between water and solid. The superposition of plate according a optimised slope increase the surface of settlement for a given footprint. This technology is often used for industry with mineral or biological sludge. The lamella separator is often the first stage before a sand filter. This device can be made ether in a concrete ...
Manufactured by:Kamps s.a. based inBattice, BELGIUM
Kamps design the steel structure for the realisation of water tower. The structure is very easy for transportation and local assembly . Water storage allow an simple pressure regulation on the net and is also a very easy system to storage energy by using solar pump without grid connexion. The study of those tanks are done by finite element analysis and according customer request (ground, wind ...
Manufactured by:Kamps s.a. based inBattice, BELGIUM
The SOLAIRMAX is a surface aerator that works with solar energy. It is meant for lagoons, Waste Water Treatment Plants, lakes, ponds. The SOLAIRMAX is designed as an answer to the fossil energies reduction and to the need of sustainable consumptions development. The SOLAIRMAX is the ideal oxygen production installation for the biological aquatic aerobic systems. The oxygen that is dissolved in ...
Manufactured by:Kamps s.a. based inBattice, BELGIUM
The COVERMAX is a completely covered surface aerator. It is designed in order to answer to WWTP specific requirements. As a result of the high efficiency –low speed and –high diameter aerators ...
Manufactured by:Kamps s.a. based inBattice, BELGIUM
Designed for dewatering of municipal and industrial sludge in small or big capacities. Manual or automatic plate Shifting System. Full automatic system with 'inteligent' scraper. Various accessories : electrical control panel, Drip tray, process engineering,high pressure washing system, pneumatic system, acid washing system control panel for the whole ...
Manufactured by:Kamps s.a. based inBattice, BELGIUM
Designed for continuous thickening and dewatering of municipal and industrial sludge in small and medium capacities. Belt width : 1 to 2,50 m. Sludge flowrate: up to 40 m3/h. Easy maintenance and supervision. Reduced operating costs. Full enclosure for safety and odor extraction. Various configurations : “long” or “high” version. Material : stainless steel 304L, 316L or ...
Manufactured by:Kamps s.a. based inBattice, BELGIUM
Designed for the continuous mechanical dewatering of municipal and industrial sludge in small and medium capacities. Belt width : 1 to 2 m. Sludge flowrate: up to 12 m3/h. Low energy consumption and operating costs. Clean operating system. Very clean operation. Easy access for supervision and maintenance. Visual control of the sludge during ...
Manufactured by:Kamps s.a. based inBattice, BELGIUM
Designed for continuous thickening and dewatering of municipal and industrial sludge in small capacities. Belt width : 0,60 and 1,20 m. Sludge flowrate : up to 15 m3/h. compact design for real space saving. Easy maintenance and supervision. Low energy consumption and operating costs. Full enclosure for safety and odor ...
Manufactured by:Kamps s.a. based inBattice, BELGIUM
Designed for continuous mechanical thickening of municipal or industrial sludge. Especially aimed to very high capacity installations. Continuous thickening. Belt width : from 1 to 3 m. Filtration length : 5m. Sludge flowrate : up to 200 m3/h. Very clean operation. Quick and easy supervision. Low energy consumption and operating cost. Material : stainless steel 304L, 316L or ...
Manufactured by:Kamps s.a. based inBattice, BELGIUM
Designed for continuous mechanical thickening of municipal or industrial sludge: Continuous thickening. Belt width : from 0,50 to 2,50 m. Filtration length : 2 m. Sludge flowrate: up to 40 m3/h. Very clean operation. Easy maintenance and supervision. Low energy consumption and operating costs. Material : stainless steel 304L, 316L industrial ...
Manufactured by:Kamps s.a. based inBattice, BELGIUM
ZeeWeed based wastewater and water treatment is a low energy immersed membrane process that consists of Outside-in, hollow-fiber modules immersed directly in the feed-water. The small pore size of the ZeeWeed membranes ensures that no particulate matter will pass into the treated water stream. Thereby the ZeeWeed ultrafiltration membrane system can easily remove particles and suspended solids. ...
Manufactured by:Kamps s.a. based inBattice, BELGIUM
This aerator is based on the well-know AIRMAX aerator. For limited power aerator Kamps delivers a standard low-cost product with very high efficiency. This product is designed for small application like fishing ponds, shrimps farms, and small lagoon. ...
Manufactured by:Kamps s.a. based inBattice, BELGIUM
Designed for continuous thickening and dewatering of municipal and industrial sludge in medium and big capacities. Belt width : 1 to 2,50 m. Sludge flowrate: up to 150 m3/h. Easy maintenance and supervision. Reduced operating costs. Full enclosure for safety and odor extraction. Various configurations : “long” or “high” version. Material : stainless steel 304L, 316L or ...
Manufactured by:Kamps s.a. based inBattice, BELGIUM
Designed for continuous mechanical dewatering of municipal and industrial sludge in medium and big capacities. Belt width : 1 to 3 m. Sludge flowrate : up to 30 m3/h. Low energy consumption and operating costs. Clean operating system. Very clean operation. Easy access for supervision and maintenance. Visual control of the sludge during dewatering. Material : stainless steel 304L, 316L or ...
Manufactured by:Kamps s.a. based inBattice, BELGIUM
Designed for continuous mechanical thickening of municipal or industrial sludge. Continuous thickening. Belt width: from 1 to 3 m. Filtration length: 3 m. Sludge flowrate: up to 80 m3/h. Very clean operation. Easy maintenance and supervision. Low energy consumption and operating costs. Material: stainless steel 304L, 316L or ...
Manufactured by:K31 Road Engineering, LLC. based inLaguna Beach, CALIFORNIA (USA)
K31-CAP cold mix liquid allows the small contractor to manufacture cold mix asphalt in any country to sell and without having the huge expense of an asphalt plant. The concentrate is manufactured in the USA and ships from the USA in 1,000 liter totes. As you can see there is no need for asphalt plants or complicated and expensive equipment. A simple concrete mixer will do just fine. The cold mix ...
by:The GAST Group based inPretoria, SOUTH AFRICA
Geosynthetics, geomembranes, dams, leach pads, reservoirs, landfills, hdpe, pipes, lldpe, ldpe, ...
Manufactured by:Kamps s.a. based inBattice, BELGIUM
Complete water treatment system from 50 up to 1000 e.i. How does the AiRBC operates?. This water treatment system consists in an standard set for municipal waste water treatment (or assimilable). The system presents the advantage to be modular and permits to be adapted easily to any biodegradable waste water. The system uses the Rotating Biological Contactor. Two separated stages are operating ...