Refine by
Xprt Equipment Supplied In Rwanda
406 equipment items found
Manufactured by:K31 Road Engineering, LLC. based inLaguna Beach, CALIFORNIA (USA)
K31-CAP cold mix liquid allows the small contractor to manufacture cold mix asphalt in any country to sell and without having the huge expense of an asphalt plant. The concentrate is manufactured in the USA and ships from the USA in 1,000 liter totes. As you can see there is no need for asphalt plants or complicated and expensive equipment. A simple concrete mixer will do just fine. The cold mix ...
by:The GAST Group based inPretoria, SOUTH AFRICA
Geosynthetics, geomembranes, dams, leach pads, reservoirs, landfills, hdpe, pipes, lldpe, ldpe, ...
Manufactured by:Kamps s.a. based inBattice, BELGIUM
The air diffusers are world wide known to have a good aeration efficiency. This bottom aeration technique has also mixing capacities for the activated sludge in biological tanks with great depths. Air diffusers can be installed in both urban and industrial waste water treatment ...
Manufactured by:Kamps s.a. based inBattice, BELGIUM
KAMPS delivers as partner of the general contractors the full package of screen and screw pumps according the tender ...
Manufactured by:Kamps s.a. based inBattice, BELGIUM
Designed for the continuous mechanical dewatering of municipal and industrial sludge in small capacities. Belt width : 0,60 and 1 m. Sludge flowrate : up to 6 m3/h. Easy maintenance and supervision. Low energy consumption and operating costs. Very clean operation. Full enclosure for safety and odor extraction. Material : stainless steel 304L, 316L or ...
Manufactured by:Kamps s.a. based inBattice, BELGIUM
Designed for continuous mechanical thickening of municipal or industrial sludge. Continuous thickening. Belt width : from 1 to 3 m. Filtration length : 4m. Sludge flowrate: up to 100 m3/h. Very clean operation. Easy maintenance and supervision. Low energy consumption and operating costs. Material : stainless steel 304L, 316L or ...
Manufactured by:Kamps s.a. based inBattice, BELGIUM
In lagoon and in some lacs and ponds, the organic sludge settle in the bottom reducing the volume of the water ponds. More important, when this sludge is not stabilised it will create odours and process perturbation due to anaerobic sludge.. Anaerobic decay produces toxic gas which will come some or later in the atmosphere. The methane gas has a very negative effect on greenhouse gas…that ...
Manufactured by:Kamps s.a. based inBattice, BELGIUM
Complete water treatment system from 50 up to 1000 e.i. How does the AiRBC operates?. This water treatment system consists in an standard set for municipal waste water treatment (or assimilable). The system presents the advantage to be modular and permits to be adapted easily to any biodegradable waste water. The system uses the Rotating Biological Contactor. Two separated stages are operating ...
Manufactured by:Kamps s.a. based inBattice, BELGIUM
KAMPS sells a range of screens witch remove solids and fibers with from municipal and industrial waste-water. The use of these screens is extremely simple, and they present three major advantages : continuous operation, a very low energy consumption and nearly no need for washing water. Therefore, screens are the best equipment for the protection of membrane bioreactors systems (MBR). In smaller ...
Manufactured by:Kamps s.a. based inBattice, BELGIUM
Kamps ultrafiltration systems combine process efficiency and a great installation flexibility. Our solutions can be used alone or integrated in a complex treatment line. Ultrafiltration is a physical treatment process which clarifies and disinfects the water in a single step, while maintaining the water’s mineral balance. Our technology guarantees consistent water quality regardless of ...
Manufactured by:Kamps s.a. based inBattice, BELGIUM
Kamps designs and delivers pumping stations for several applications from drinking water supply or irrigation to sewage.This activity is closely linked to the water treatment process where Kamps has more than 60 years experience. Kamps finds solutions, and adapts its product to respond to the specific requirements of the customer and the ...
Manufactured by:Kamps s.a. based inBattice, BELGIUM
KAMPS company is a surface aerator manufacturer and supplier since more than 30 years and has references all over the world. The low speed vertical shaft aerator AIRMAX presents all the required qualities for efficient aeration of biological plants. Indeed low speed surface aerators oxygen transfer efficiency is one of the highest compared to other aeration ...
Manufactured by:Kamps s.a. based inBattice, BELGIUM
The Toveko continuous sand filter marketed by Kamps is a novel method of suspended solids removal using sand filtration. It may be used with or without chemical precipitation according to the application, and is well suited in both sewage and industrial waste water treatment applications. The Toveko sand filter continuously cleans itself whilst in service, and the sand bed is therefore ...
Manufactured by:K31 Road Engineering, LLC. based inLaguna Beach, CALIFORNIA (USA)
Soil stabilization technology has evolved, there have now emerged new types of soil stabilization techniques, many of which are classified as “green technologies”. Road construction using soil stabilization. No need for lime stabilization, lime-treated soil, or cement soil stabilization. Dirt is probably the cheapest and simplest construction material out there, but it’s not ...
Manufactured by:Kamps s.a. based inBattice, BELGIUM
The SOLAIRMAX is a surface aerator that works with solar energy. It is meant for lagoons, Waste Water Treatment Plants, lakes, ponds. The SOLAIRMAX is designed as an answer to the fossil energies reduction and to the need of sustainable consumptions development. The SOLAIRMAX is the ideal oxygen production installation for the biological aquatic aerobic systems. The oxygen that is dissolved in ...
Manufactured by:Kamps s.a. based inBattice, BELGIUM
The COVERMAX is a completely covered surface aerator. It is designed in order to answer to WWTP specific requirements. As a result of the high efficiency –low speed and –high diameter aerators ...
Manufactured by:Kamps s.a. based inBattice, BELGIUM
Designed for dewatering of municipal and industrial sludge in small or big capacities. Manual or automatic plate Shifting System. Full automatic system with 'inteligent' scraper. Various accessories : electrical control panel, Drip tray, process engineering,high pressure washing system, pneumatic system, acid washing system control panel for the whole ...
Manufactured by:Kamps s.a. based inBattice, BELGIUM
Designed for continuous thickening and dewatering of municipal and industrial sludge in small and medium capacities. Belt width : 1 to 2,50 m. Sludge flowrate: up to 40 m3/h. Easy maintenance and supervision. Reduced operating costs. Full enclosure for safety and odor extraction. Various configurations : “long” or “high” version. Material : stainless steel 304L, 316L or ...
Manufactured by:Kamps s.a. based inBattice, BELGIUM
Designed for the continuous mechanical dewatering of municipal and industrial sludge in small and medium capacities. Belt width : 1 to 2 m. Sludge flowrate: up to 12 m3/h. Low energy consumption and operating costs. Clean operating system. Very clean operation. Easy access for supervision and maintenance. Visual control of the sludge during ...
Manufactured by:Kamps s.a. based inBattice, BELGIUM
Designed for continuous thickening and dewatering of municipal and industrial sludge in small capacities. Belt width : 0,60 and 1,20 m. Sludge flowrate : up to 15 m3/h. compact design for real space saving. Easy maintenance and supervision. Low energy consumption and operating costs. Full enclosure for safety and odor ...