- Home
- Equipment
- saudi arabia
- inline sampling
Refine by
Applications
- Monitors, gas analyzers solutions for semiconductor / microelectronics sector
- Monitors, gas analyzers solutions for photonics & optics
- Monitors, gas analyzers solutions for aerospace & defense industry
- Monitors, gas analyzers solutions for ISO 14644-1/2: 2015 insights & solutions
- Process analyzers & instruments for sulfur pit gas
Inline Sampling Equipment Supplied In Saudi Arabia
8 equipment items found
Premium
Manufactured by:ENVEA based inPoissy, FRANCE
Ideal for mid-high to high concentrations or for sampling locations in hazardous areas. The flue gas is extracted, filtered & diluted with clean / dry air, by an in-stack dilution probe, before being sent to the analyzer. This technique lowers the flue gas dew point, keeping the sample temperature above it and at ambient temperature, in order to eliminate all condensation issues (water ...
Premium
Manufactured by:ENVEA based inPoissy, FRANCE
Ideal for mid-high to high concentrations, also for sampling locations in hazardous areas ...
Manufactured by:Eigenbrodt GmbH & Co. KG based inKönigsmoor, GERMANY
The temperature sensor is installed into the sample room as shown left hand side. The data is directly available as analogue PT100 signal. In combination with the Eigenbrodt signal PCBs, the temperature data of the sample room can be accessed as 4-20mA signal or as serial signal, depending on version of the ...
Manufactured by:Eigenbrodt GmbH & Co. KG based inKönigsmoor, GERMANY
The temperature sensor is installed into the sample room as shown left hand side. The data is directly available as analogue PT100 signal. In combination with the EIGENBRODT signal PCBs, the temperature data of the sample room can be accessed as 4-20mA signal or as serial signal, depending on version of the PCB. Alternatively also a internal temperature logging unit with sensor for sample room ...
Manufactured by:Particle Measuring Systems (PMS) based inNiwot, COLORADO (USA)
LiQuilaz II optical liquid particle counter is a volumetric monitor with a variety of sizing sensitivities as low as 0.2 µm. It provides high precision analysis for most process chemicals, including hydrofluoric acid and hot corrosive chemicals up to 306 °F (152 °C). Sensitivity range: 0.2 – 20 ...
Manufactured by:AMETEK Process Instruments based inPittsburgh, PENNSYLVANIA (USA)
Using high-resolution ultraviolet (UV) technology in a dual-beam, multiple-wavelength configuration, the 900 is specifically designed to meet the demanding analytical requirements of modern sulfur recovery processes. Capable of measuring up to four species simultaneously, this air demand analyzer is uniquely capable of monitoring off-ratio applications, providing accurate chemical concentration ...
Manufactured by:AMETEK Process Instruments based inPittsburgh, PENNSYLVANIA (USA)
Using proven ultraviolet (UV) technology, the 930 identifies potential safety risks in sulfur storage locations through simultaneous hydrogen sulfide (H2S) and sulfur dioxide (SO2) measurements. Capable of stable, sensitive measurements ranging from parts-per-million (ppm) to percentage levels, the analyzer offers output alarms for the lower explosive limit of H2S and smoldering fire level of ...
Manufactured by:Particle Measuring Systems (PMS) based inNiwot, COLORADO (USA)
The MiniCapt® Compressed Gas kit allows the MiniCapt Mobile Microbial Sampler to perform microbiological monitoring of compressed gases. The compressed gas kit is designed to work with either the 25 LPM, 50 LPM, or 100 LPM MiniCapt Mobile. This compressed gas kit uses a special diffusion chamber mounted directly to the MiniCapt inlet, the other end of which is connected directly to the high ...