- Home
- south korea
- Equipment
Refine by
Applications
- Level Sensors Simplify Inventory for Food Processors
- Channel Networks solutions for Seepage Water
- Solutions for Real-Time Bulk Material Inventory for Cement
- Channel networks solutions for replacement of measurement with inverted syphon sector
- Solutions for Bioenergy
- Solutions for Mining Industry
- Channel Networks - Fix Installation Measurements for hybrid flow measurement in main collector sector
- Solutions for Precision Plastic Resin Inventory for Silos
- Solutions for Digitize Agriculture Inventory
- Channel Networks - Fix Installation Measurements for no shutting down the flow areas
- Particle Measurement Instruments for Non-Exhaust Vehicle Emissions
- Channel Networks - Fix Installation Measurements for Flow Measurement In Pipe That Could Not Be Shut Down
- Multiprobes for Surface Water
- Multiprobes for Harmful Algal Bloom
- Multiprobes for Coastal
- Multiprobes for Stormwater
- Multiprobes for Aquaculture
- Multiprobes for Sourcewater
- Multiprobes for Groundwater
- Multiprobes for Dye Tracing
- Multiprobes for Dredging
- Multiprobes for Multiprobes for Dredging
- Multiprobes for Wastewater
- Multiprobes for Oil & Gas
- Multiprobes for Early Warning
- Measurements Solutions for New Space Optics
- Measurements Solutions for Research
- Measurements Solutions for Start Up
- Measurements Solutions for Topography & Texture
- Measurements Solutions for Wedge & Prism Angle
- Measurements Solutions for Radius of Curvature
- Measurements Solutions for Semiconductor Industry
- Solutions for waste water treatment
- Measurements Solutions for Optics & Photonics
- Measurements Solutions for Aerospace
- Air Pollution Measurements for Education
- Soil sampling and drilling solutions for agriculture industry
- Pressure sensor for Machine and plant construction
- Measurements Solutions for Automotive
- Measurements Solutions for Consumer Electronics
- Measurements Solutions for Defense
- Measurements Solutions for Asphere & Freeform Metrology
- Measurements Solutions for Roughness Metrology of Aspheres & Freeforms
- Measurements Solutions for Datum & Relational Metrology
- Monitors, gas analyzers solutions for ISO 14644-1/2: 2015 insights & solutions
- Gas Mass Flow Meters, Sensors & Controllers for High Flow Gas Control
- Hose and tube pumps for Food and beverage industry
- Solutions for water treatment and water disinfection industry
- Water treatment solutions for utility water treatment
- Pressure sensor for Shipbuilding & marine industry
- Premium gas generators and calibration solutions for gas chromatography (GC) sector
- Flow Solutions for Original Equipment Manufacturers (OEM)
- Application for slow speed metals processing shredding
- Pressure sensor for Water supply
- Industrial Waste Shredders for Waste to energy
- Moisture sensors for the construction and concrete industry
- Water sampling for the environmental industry
- Water treatment solutions for swimming pool water treatment
- Agitation and mixing solutions for bio technology
- Environmental monitoring solutions for the department of defense and department of energy (DOD-DOE) industry
- Environmental monitoring solutions for the industrial sites industry
- Water monitoring instruments for surface water monitoring
- Hose and tube pumps for Printing & packaging industry
- Hose and tube pumps for Original equipment manufacture
- Monitors, gas analyzers solutions for semiconductor / microelectronics sector
- Continuous emissions monitoring solutions for sulfuric acid production plants
- Air pollution, emission and process monitoring systems for agriculture
- Water monitoring for the environmental industry
- Continuous emissions monitoring solutions for brick plants
- Continuous emissions monitoring solutions for power plants
- Electronic pressure measurement devices for Machinery and plant construction industry
- Air pollution, emission and process monitoring systems for metals
- Flame Photometer for Measurement of Lithium Sea Water
- Flame Photometer for Determination of Na in Biodiesel using Dry Decomposition for Sample Preparation
- Flow Solutions for Aerospace
Xprt Equipment Supplied In South Korea
13,700 equipment items found
Showcase
Manufactured by:BD|SENSORS GmbH based inThierstein, GERMANY
The differential pressure transmitter DPT 200 has been especially designed for the process industry and can be used for level measurement of closed, pressurized tanks, pump or filter controlling, etc. The possibility passes different pressure seals at the DPT 200 adding with different membrane materials to reach an optimal adaptation to the application. Features: - differential pressure von 1 ...
Showcase
Manufactured by:Metrohm AG based inHerisau, SWITZERLAND
Innovative, modular potentiometric OMNIS Titrator for stand-alone operation or as the core of an OMNIS titration system for endpoint titration and equivalence point titration (monotonic/dynamic). Thanks to 3S Liquid Adapter technology, handling chemicals is more secure than ever before. The titrator can be freely configured with measuring modules and cylinder units and can have a rod stirrer ...
Showcase
Manufactured by:Delta-T Devices Ltd. based inBurwell, UNITED KINGDOM
The DL6 is a dedicated data logger optimised for use with Delta-T soil moisture sensors. It can be used with combinations of ThetaProbes, SM150 Soil Moisture Sensors, SM300 Soil Moisture Sensors and Profile Probes, and also accepts rain gauge and soil temperature probe inputs. Up to 16000 readings can be stored in ...
Showcase
Manufactured by:Myron L Company based inCarlsbad, CALIFORNIA (USA)
We are proud of the trust our handheld water quality instruments and monitor/controllers have earned in the past. Our product line has evolved to a new level of outstanding performance and value in analytical instruments: the Ultrameter II series. While priced like affordable single-parameter instruments, the Ultrameter II does the job of up to seven ...
Showcase
Manufactured by:Granutech-Saturn Systems based inGrand Prairie, TEXAS (USA)
Granutech’s Saturn powderizers produce materials from 6 mesh to 30 mesh, using 1/4' to 3/8' granulate as feed. Using a controlled feed system, our high performance powderizers can produce up to 2,000 lbs per hour, depending on screen and feedstock ...
Showcase
Manufactured by:Stevens Water Monitoring Systems, Inc. based inPortland, OREGON (USA)
The Dyacon Meteorological Station MS-130 is a preconfigured weather monitoring device that requires no programming or specialized setup. This station is shipped with control module (data logger) with a cell module, solar panel, and the following sensors: wind and wind direction (with wind gust and direction averaging), barometric pressure, relative humidity, and ambient temperature. Other ...
Showcase
Manufactured by:Beachcleaners Dorny based inKortrijk, BELGIUM
Our most maneuverable and precise construction. Utmost suitable for small - and difficult - ...
Showcase
Manufactured by:Granutech-Saturn Systems based inGrand Prairie, TEXAS (USA)
Granutech-Saturn Systems' designs extend to our unique rugged quad-shaft industrial shredders for applications that require uniform size reduction. Granutech’s quad-shaft Saturn shredders lead the market in performance, durability and reliability in evolving applications. Saturn industrial shredders can work with a broad range of materials and Granutech can also custom-design and configure ...
Showcase
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
The device is used to monitor and record the quality of the SF6 gas in a gas compartment. The following quality parameters can be determined with only one measurement: SF6 volume percentage (%). Moisture concentration (°C atmosphere, °C pressure, °F atmosphere, °F pressure, ppmv, ppmw). SO2-Concentration ...
Showcase
Manufactured by:Ferrari Growtech S.P.A. based inGuidizzolo, ITALY
This machine has been developed to have high-technology characteristics. It has been projected for the automatic transplanting of vegetables and tobacco stored in trays. It requires just one operator loading the trays into the charging slide of each single planting element. Each element of the machine is provided with a system, which automatically pulls out, from the longer side of the tray, the ...
Showcase
Manufactured by:LNI Swissgas based inVersoix, SWITZERLAND
POLLUCE is designed to satisfy the needs of all LCMS brand on the market. It makes use of Pressure Swing Adsorption technology (PSA), through the use of specific selected molecular sieves (CMS), enable to obtain extremely pure nitrogen, this technologies reduced risk of gas contamination and ...
Showcase
Manufactured by:SnowPure Water Technologies based inSan Clemente, CALIFORNIA (USA)
Electropure™ EDI technology has now been brought down in size. Zapwater™ EDI modules are designed for small countertop or wall-mount laboratory water deionization products, which produce ASTM Type I & II, or JIS A2 to A4 water. Zapwater™ customers can expand their existing laboratory RO/DI/UF product lines to include an EDI-based product. It will be easy to incorporate the ...
Showcase
Manufactured by:BUCHI based inFlawil, SWITZERLAND
Pre-incineration unit for ash determination. The Wet Digester B-440 is an ecological pre-incineration unit for ash determination in different sample types. Select from a wide temperature range of up to 600 °C for more flexibility. Improve reproducibility with programmable incineration ...
Showcase
Manufactured by:OPSIS AB based inFurulund, SWEDEN
A wide range of products are combined into customised systems. Differential Optical Absorption Spectroscopy (DOAS) is the core technology in the OPSIS product portfolio where a combination of light emitters, light receivers, optical fibres, and analysers allows the monitoring of gaseous pollutants and other substances for both emissions monitoring and process control. ...
Showcase
Manufactured by:Galaxy Scientific Inc based inNashua, NEW HAMPSHIRE (USA)
The QuasIR™ 4000 FT-NIR spectrometer was designed from the ground up to offer the industry a new kind of NIR analysis solution – a solution that brings together the portability required to move NIR analysis closer to point-of-need, combined with unmatched spectroscopic performance for the fastest and most accurate results. It was engineered to ensure direct calibration transfer ...
Showcase
Manufactured by:Samyang Corporation based inJongno-gu, SOUTH KOREA
TRILITE SPC280H is a SAC, porous-type exchange resin with high cross-linking density, high exchange capacity, outstanding mechanical wear resistance, and chemical/physical stability. It is a highly active catalyst that can be used for a range of catalytic reactions, including esterification, etherification, alkylation, and hydration. Additionally, it can be used to produce high-purity treated ...
Showcase
Manufactured by:Kurita Water Industries Ltd based inTokyo, JAPAN
Kurita’s S.sensingTM CS technology offers innovative equipment to control the product dosage in industrial wastewater treatment systems. This state-of-the-art wastewater monitoring system is using a laser-based technology and offers an in situ measurement of the turbidity between the flocs. The advantage of measuring the turbidity between the flocs is that this enables the S.sensingTM CS ...
Showcase
Manufactured by:WESS Global, Inc. based inSeobuk-gu, SOUTH KOREA
ENV200-C clamp-on density measurement guarantees fit-and-forget and reliable measurement with every kind of measuring medium. Different from other density meters, its measurement isn't affected by pressure, corrosiveness, nor abrasiveness. As the clamp-on sensor can be mounted outside of pipe line even under flow-running condition, the user neither need to stop their process nor to consider the ...
Showcase
Manufactured by:BUCHI based inFlawil, SWITZERLAND
The next generation laboratory spray dryer. With the Mini Spray Dryer S-300, BUCHI solidifies its position as a global market leader for more than 40 years. The laboratory spray dryer combines outstanding product design with unique instrument capabilities to offer a superior user ...
Premium
Manufactured by:Samyang Corporation based inJongno-gu, SOUTH KOREA
TRILITE MA-13J Fine Mesh Strong Base Anion Exchange Resin is a Gel Type 1 Uniform Particle Size resin. Because of its outstanding ion removal capacity, high purity water can be produced economically. TRILITE MA-13J is a standard cross-linkage product and it has outstanding mechanical and chemical stability, leading to low crush rate even after long-term use. TRILITE® MA-13J can be supplied by ...