Refine by
Applications
- Channel Networks solutions for Seepage Water
- Channel networks solutions for replacement of measurement with inverted syphon sector
- Channel Networks - Fix Installation Measurements for hybrid flow measurement in main collector sector
- Channel Networks - Fix Installation Measurements for no shutting down the flow areas
- Particle Measurement Instruments for Non-Exhaust Vehicle Emissions
- Channel Networks - Fix Installation Measurements for Flow Measurement In Pipe That Could Not Be Shut Down
- Multiprobes for Surface Water
- Multiprobes for Harmful Algal Bloom
- Multiprobes for Coastal
- Multiprobes for Stormwater
- Multiprobes for Aquaculture
- Multiprobes for Sourcewater
- Multiprobes for Groundwater
- Multiprobes for Dye Tracing
- Multiprobes for Dredging
- Multiprobes for Multiprobes for Dredging
- Multiprobes for Wastewater
- Multiprobes for Oil & Gas
- Multiprobes for Early Warning
- Laboratory and industrial ovens and furnaces solutions for research / university industry
- Heat Exchangers Solutions for Evaporation & Concentration of Environmental Waste Streams Sector
- Heat Exchangers Solutions for Pasteurisation of Sludge Sector
- Heat Exchangers Solutions for Sewage Treatment Industry
- Heat Exchangers Solutions for for Waste Water Industry
- Solutions for waste water treatment
- Laboratory and industrial ovens and furnaces solutions for electronics industry
- Laboratory and industrial ovens and furnaces solutions for materials research sector
- Solutions for Industry
- Metal Recycling and Separation in the Mining Industry
- Recycling and separation of metals in the food industry
- Recycling and Separation of Metals in the Recycling Plant Industry
- Recycling and separation of metals in the glass industry
- Recycling and separation of metals in the pharmaceutical industry
- Recycling and Separation of Metals in Food and Beverage Production
- Recycling and Separation of Metals in Plastics and Tire Recycling
- Recycling and Separation of Metals in End-of-Life Vehicle (ELV) Recycling
- Recycling and Metal Separation in Electronics Recycling
- Recycling and separation of metals in the chemical industry
- Recycling and separation of metals from sheared scrap
- Recycling and Separation in Fragmented Scrap: Magnetic Technologies
- Recycling and Separation of Metals in Incinerator Ash: Magnetic Technologies in Action
- Recycling and Repair of Materials in the Financing Industry: Magnetic Technologies in Action
- Recycling and Separation of Ferrous Metals in Mining: Magnetic Technologies
- Separation of recyclable materials from household waste
- Separation of impurities and recyclable materials from commercial waste, industrial waste and bulky waste
- The recovery, separation and recycling of non-ferrous metals with the best magnetic and eddy current separation technology
- Air quality and industrial gas monitoring systems for Ambient air monitoring
- Laboratory and industrial ovens and furnaces solutions for automotive industry
- Stack Emission Sampling for Emission Dust Sampling Options
- Stack Emission Sampling for Heavy Metal Sampling System
- Stack Emission Sampling for Mercury Sampling System
- Stack Emission Sampling for Hydrochloride Acid Chimney Sampling
- Stack Emission Sampling for Dioxin Sampling
- Heat Exchangers Solutions for Palm Oil Sector
- Air Pollution Measurements for Education
- Gas Analysers and Sampling System for Combustion Control & Flue Gas
- Gas Analysers and Sampling System for Power Plants
- Heat Exchangers Solutions for Anaerobic Digestion (AD) and Biogas Industry
- Heat Exchangers Solutions for Vegetable Oils Industry
- Soil sampling and drilling solutions for agriculture industry
- Pressure sensor for Machine and plant construction
- Laboratory and industrial ovens and furnaces solutions for aerospace industry
- Air quality and industrial gas monitoring systems for Road side air monitoring
- Monitors, gas analyzers solutions for ISO 14644-1/2: 2015 insights & solutions
- Hose and tube pumps for Food and beverage industry
- Air quality and industrial gas monitoring systems for Semiconductor
- Air filtration and gas purification solutions for corrosion detection, prevention and control sector
- Heat Exchangers Solutions for Fine Chemicals Sector
- Heat Exchangers Solutions for Solvent Sector
- Vibratory systems for bulk material handling
- Solutions for water treatment and water disinfection industry
- Water treatment solutions for utility water treatment
- Pressure sensor for Shipbuilding & marine industry
- Premium gas generators and calibration solutions for gas chromatography (GC) sector
- Laboratory and industrial ovens and furnaces solutions for ceramics / glass industry
Xprt Equipment Supplied In Spain
22,985 equipment items found
Showcase
Manufactured by:Myron L Company based inCarlsbad, CALIFORNIA (USA)
We are proud of the trust our handheld water quality instruments and monitor/controllers have earned in the past. Our product line has evolved to a new level of outstanding performance and value in analytical instruments: the Ultrameter II series. While priced like affordable single-parameter instruments, the Ultrameter II does the job of up to seven ...
Showcase
Manufactured by:LNI Swissgas based inVersoix, SWITZERLAND
H2 POWER 10L is a system able to provide up to 1Nm3/h of hydrogen. The hydrogen is produced from three Hydrogen Generators “6920.16.330” connected in parallel mode. 6920.16.330 uses an electrolytic cell with polymeric membrane (PEM) to produce pure hydrogen from distilled water. No acid or alkaline solutions are used. It is provided with an internal 1.1 litres tank with electronic ...
Showcase
Manufactured by:LNI Swissgas based inVersoix, SWITZERLAND
POLLUCE is designed to satisfy the needs of all LCMS brand on the market. It makes use of Pressure Swing Adsorption technology (PSA), through the use of specific selected molecular sieves (CMS), enable to obtain extremely pure nitrogen, this technologies reduced risk of gas contamination and ...
Showcase
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
The device is used to monitor and record the quality of the SF6 gas in a gas compartment. The following quality parameters can be determined with only one measurement: SF6 volume percentage (%). Moisture concentration (°C atmosphere, °C pressure, °F atmosphere, °F pressure, ppmv, ppmw). SO2-Concentration ...
Showcase
Manufactured by:Envira based inLlanera, SPAIN
Improve health, productivity and save costs with the Nanoenvi IAQ air quality monitoring system for offices. Thanks to its continuous measurement of CO2, airborne particles, volatile organic compounds, temperature and humidity, this air quality sensor for healthy offices and buildings provides real-time information on the air quality in the workplace, meeting rooms, offices and common areas, ...
Showcase
Manufactured by:BUCHI based inFlawil, SWITZERLAND
Pre-incineration unit for ash determination. The Wet Digester B-440 is an ecological pre-incineration unit for ash determination in different sample types. Select from a wide temperature range of up to 600 °C for more flexibility. Improve reproducibility with programmable incineration ...
Showcase
Manufactured by:Analytik Jena - Lab-loving people based inJena, GERMANY
Quality is the difference: Unique application diversity (TS, TC, TX, TOC, TIC, EC, AOC). Low maintenance and low operating costs. Fully automated solids sampler with high sample ...
Showcase
Manufactured by:ENVEA based inPoissy, FRANCE
CAI PAS Sense analyzers use photoacoustic infrared technology to measure many of the most commonly measured IR-absorbing gases. Gas selectivity is achieved through the use of optical filters that provide both a means of detecting the gas of interest and compensating for interfering gases and water. Both bench-top and rack-mounted PAS configurations are ...
Showcase
Manufactured by:Myron L Company based inCarlsbad, CALIFORNIA (USA)
This portable water analysis instrument is designed to be extremely accurate, fast and simple to use in diverse water quality applications. Advanced features include the ability to select from 3 different solution types that model the characteristics of the most commonly encountered types of water; proprietary temperature compensation and TDS conversion algorithms; highly stable ...
Showcase
Manufactured by:Stevens Water Monitoring Systems, Inc. based inPortland, OREGON (USA)
The Dyacon Meteorological Station MS-130 is a preconfigured weather monitoring device that requires no programming or specialized setup. This station is shipped with control module (data logger) with a cell module, solar panel, and the following sensors: wind and wind direction (with wind gust and direction averaging), barometric pressure, relative humidity, and ambient temperature. Other ...
Showcase
Manufactured by:C&G Evaporator based inRignano S.Arno (Firenze), ITALY
High quality condensate. Energy consumption is reduced to a minimum by using a heat pump in a vacuum. With an absolute pressure of ≈ 33 mbar in the boiling chamber, evaporations occurs at very low temperatures (≈ 35 ºC). Volumes treated 150 – 30,000 litres/day. Volumes processed 150 – 30,000 ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
Maximal efficiency with up to 10 measurement points in parallel. Continuously monitor key parameters such as moisture, protein, fat, ash, starch, fiber, oil at any process step with NIR-Online Multipoint Sensor. Innovative Multipoint heads provide maximal efficiency for up to ten measurement points in parallel ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
Introducing the Lyovapor™ L-210, equipped with our cutting-edge EcoStream™ and Infinite-Control™ technologies. The timesaving Lyovapor™ L-210 sets new efficiency standards while maintaining exceptional, reliable, and stable cooling performance. Designed with advanced automation and flexibility, the Lyovapor™ line not only reduces drying time but also minimizes ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
Sepiatec’s SFC-M5 250 system is a preparative system for separating chiral and achiral samples using supercritical fluid chromatography. The SFC-M5 250 system consists of the main module and the collector module. Both modules form a functional unit that can be configured in a variety of ways with different equipment. The main module can be equipped with up to three high pressure pumps, a ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
Rubber cap for beaker flask 800 ml, 1200 ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
The preparative version of the Sepmatix 8x HPLC system has an HPLC pump that is equipped with a 100 ml pump head, the max. operating pressure is 400 bar. Flow rates per channel 3.0 to 8.0 ml/ min. For parallel collection of fractions from all 8 channels, the system is additionally equipped with 8 fraction collectors, which are combined in a compact collector module. In the standard version the ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
Sepiatec’s SFC-M5 system is a preparative system for separating chiral and achiral samples using supercritical fluid chromatography. The system is available in the product variants M5 50 and M5 250. The SFC-M5 system consists of the main module and the collector module. Both modules form a functional unit that can be configured in a variety of ways with different equipment. The main module ...
Premium
Manufactured by:BUCHI based inFlawil, SWITZERLAND
All that is essential for process control. Closely monitoring basic parameters such as moisture, fat or protein is crucial to correct deviations in manufacturing processes. The X-Sential™ has been developed and designed as the most cost-efficient, fit-for-purpose process ...
Premium
Manufactured by:Metrohm AG based inHerisau, SWITZERLAND
"Reduce to the max" - that is the concept behind the 915 KF Ti-Touch. The new compact titrator for Karl Fischer titration from Metrohm offers the maximum in the class of stand-alone systems for routine analysis. Burets, stirrer, dosing unit and Touch Control are integrated in a single, compact system unit. This saves a great deal of space on the laboratory table. The 915 KF Ti-Touch now also ...
Premium
Manufactured by:Metrohm AG based inHerisau, SWITZERLAND
Portable single-channel conductivity measuring instrument for measuring conductivity/TDS/salinity and temperature. You will be optimally equipped for measurements in the field and in the laboratory with this battery-operated measuring instrument with a stand ...