Show results for
Refine by
Air Diffuser Equipment Supplied In Spain
32 equipment items found
Manufactured by:SFA enviro - Europelec - Aquaturbo based inParis, FRANCE
Diffuser cover made of reinforced polypropylene. Diffuser designed for many various operating conditions: Ideal for Fibre Loaded Sludge, Effluents containing Grease, and Chemical Based wastewater ...
Manufactured by:SFA enviro - Europelec - Aquaturbo based inParis, FRANCE
The removable aeration ramp is a solution to bring oxygen to effluent by fine air bubbles whatever the depth of the basin. These ramps are ideal to overcome an emergency oxygen deficit following a breakdown or an increase in the volume of effluent to be ...
Manufactured by:SFA enviro - Europelec - Aquaturbo based inParis, FRANCE
Polypropylene feeder for grids in bioreactors and degreasing tanks. Suitable for both municipal and industrial wastewater treatment plants. Allows the installation of Aquadisc® 250 / 305 / 320 and Aquatube® 70 diffusers. Diffusers are known for their excellent temperature resistance, recyclability, and ...
Manufactured by:SFA enviro - Europelec - Aquaturbo based inParis, FRANCE
Diffusers designed for aeration of activated sludge basins and tanks in Municipal and Industrial wastewater treatment plants. Quick and easy to assemble by Rotating Diffusers clockwise into Screwed connection. Designed to give optimum ...
Manufactured by:SFA enviro - Europelec - Aquaturbo based inParis, FRANCE
Increase the transfer air / liquid and avoid the phenomenon of coalescence. The AQUADISC 250 fine bubble air diffuser distributes the bubbles over the whole membrane surface to increase air/liquid transfer and to avoid coalescence. It is mostly used for aerating and oxygenating activated sludge tanks at municipal or industrial ...
Manufactured by:SFA enviro - Europelec - Aquaturbo based inParis, FRANCE
Designed for aeration of Activated Sludge Basins in Municipal and Industrial Wastewater Treatment plants. The AQUATUBE® specific design prevents sedimentation and Optimises Mixing and Oxygen Transfer. The AQUATUBE® 90 is designed to be installed on DN100 stainless steel pipe or DN110 PVC using simple fastening system. The AQUATUBE® 70 can be installed on square stainess-steel ...
Manufactured by:SFA enviro - Europelec - Aquaturbo based inParis, FRANCE
This product is designed to descale fine bubble membrane diffusers by injecting formic acid to their internal surface. This operation is required when an increase in head loss is observed and to significantly reduce calcium carbonate deposits (carbonation) in the ...
Manufactured by:Tama Aernova SpA based inPredaia, ITALY
It is particularly suitable for the extraction of dust and fumes resulting from welding, laser cutting, “light duty” plasma cutting (<200A) and in case of fine and light dust. Suitable for indoor/outdoor installation: configured with panel for air diffusion or with outlet duct ...
Manufactured by:Munters Corp based inAmesbury, MASSACHUSETTS (USA)
IS air inlets are designed to be used as ceiling or roof inlets in livestock structures. The patented Star Diffuser ensures that the incoming air stream is accurately controlled and radially distributed to create a uniform climate inside the structure. During cold periods, the cold incoming air should be heated before it makes ...
Manufactured by:Salher based inMadrid, SPAIN
The fine bubble diffusers DBF manufactured by Salher are composed of two PVC tubes connected to a “t” piece. An EPDM membrane develops around the tubes that diffuse the air distributed inside. The micro-cuts of the membrane work as a valve which releases the air under pressure and closes to the passage of water. As a ...
Manufactured by:Munters Corp based inAmesbury, MASSACHUSETTS (USA)
IS air inlets are designed to be used as ceiling or roof inlets in livestock structures. The patented Star Diffuser ensures that the incoming air stream is accurately controlled and radially distributed to create a uniform climate inside the structure. During cold periods, the cold incoming air should be heated before it makes ...
Manufactured by:CISA Cedacería Industrial S.L. based inBarcelona, SPAIN
Suitable for particle size testing of fine particles, 5 μm to 2 mm, or samples with a tendency to agglomeration or ...
Manufactured by:Intarcon S.L. based inLucena, SPAIN
Door intarblock R290 is a commercial monoblock for refrigeration and freezing cold rooms, for assembly in the door panel of the cold room with optional R290 refrigerant and air curtain built-in on the unit. R290 natural refrigerant with high energy efficiency. Optimal use of space in mini cold rooms. Tropicalised design for ambient temperature up to 45 ºC. Air curtain (optional). Units ...
Manufactured by:Met Mann based inManlleu, SPAIN
Evaporative coolers are a natural cooling system that uses water as a cooling element. Its basic operating principle is to suck in the outside air and pass it through some cooling panels moistened with water. Once the air passes through this panel, it cools and increases its ...
Manufactured by:Met Mann based inManlleu, SPAIN
Evaporative coolers are a natural cooling system that uses water as a cooling element. Its basic operating principle is to suck in the outside air and pass it through some cooling panels moistened with water. Once the air passes through this panel, it cools and increases its ...
Manufactured by:Met Mann based inManlleu, SPAIN
Evaporative coolers are a natural cooling system that uses water as a cooling element. Its basic operating principle is to suck in the outside air and pass it through some cooling panels moistened with water. Once the air passes through this panel, it cools and increases its ...
Manufactured by:Sodeca, S.L.U. based inRipoll, SPAIN
Air purifying units for circular ducts, with acoustic casing with 25 mm insulation for noise reduction, EC Technology ...
Manufactured by:Met Mann based inManlleu, SPAIN
MM hot air generators are indirect heating type equipment (hot air does not mix with the flue gases) and they work totally autonomously. They do not need additional heat dissipation elements, reducing the costs of acquisition, installation and maintenance. Its operation is based on heating a certain air flow, through the combustion of diesel, natural gas or propane gas. This flow is sucked in and ...
Manufactured by:Met Mann based inManlleu, SPAIN
ECO COOLER evaporative coolers are a natural cooling system that provide cool, humid air in the room to be heated. To cool the air, evaporative cooling technology is used, which consists of passing the outside air through panels moistened with water. As the air passes through this area, it cools and increases its humidity. The treated air is driven by a fan inside the room and by renewing the ...
Manufactured by:Tadipol SL based inSantpedor, SPAIN
The total oxidation biological treatment plants are the ideal equipment to achieve a high level of wastewater treatment. The biological treatment plants of total oxidation or prolonged aeration are the ideal equipment to achieve a high level of purification of wastewater generated in restaurants, hotels, campsites and single-family houses, without connection to the sewage ...