Show results for
Refine by
Piezometer Equipment Supplied In Spain
20 equipment items found
Manufactured by:Solinst Canada Ltd. based inGeorgetown, ONTARIO (CANADA)
The 601 Standpipe Piezometer is excellent for taking water level measurements. The PVC tip is suitable for pushing into very loose sands at the base of a borehole, or for backfilling in place within test pits and pre-augered holes. It uses a porous polyethylene filter inside a perforated PVC tip which connects to the surface with 3/4" (19 mm) ID PVC ...
Manufactured by:Solinst Canada Ltd. based inGeorgetown, ONTARIO (CANADA)
The 615 Drive-Point Piezometers are cost-effective for initial site investigations, plume delineations, and as low-cost mini well points. They are excellent for groundwater or soil gas sampling, underground storage tank monitoring, and as sparge points. The stainless steel piezometer point has a 50 mesh screen and a 3/4" NPT riser pipe. ...
Manufactured by:AMS, Inc. based inAmerican Falls, IDAHO (USA)
The Piezometer Point Holder holds the 1-1/4" Expendable Tip while driving or hammering to target ...
Manufactured by:AMS, Inc. based inAmerican Falls, IDAHO (USA)
The Piezometer Tee Jack Adapter is threaded to the Piezometer Slotted Pull Adapter which is then connected to a Big Foot Removal Jack in order to extract the system from below ground ...
Manufactured by:AMS, Inc. based inAmerican Falls, IDAHO (USA)
The SST Piezometer Spring is an internal component to the 1-1/4" (outside diameter) X 14" SST Piezometer. This part can be removed and replaced within the Piezometer for proper decontamination in-between samplings, which is extremely ...
Manufactured by:Solinst Canada Ltd. based inGeorgetown, ONTARIO (CANADA)
The Model 615 ML Multilevel Drive-Point Piezometer system can provide several monitoring zones in one drive location. The 615 ML Ports have a dual barbed stem that allows the connection of either 3/8" OD or 1/4" OD tubing to create up to 3 or 6 monitoring zones, respectively. The 615 ML Multilevel System is installed using extensions and a Manual Slide Hammer, similar to standard ...
Manufactured by:AMS, Inc. based inAmerican Falls, IDAHO (USA)
The Piezometer Slotted Pull Adapter is threaded to a 1-1/4" X 3' SST Piezometer Extension for tubing to be ran up and through. The Piezometer Tee Jack Adapter is then threaded to the Piezometer Slotted Pull Adapter to extract the system from below ground ...
Manufactured by:AMS, Inc. based inAmerican Falls, IDAHO (USA)
The AMS “Piezometer Groundwater Sampling Kit” was designed in response to our clients’ need for a manually-operated sampling kit, capable of providing a semi-permanent sampling point for water level measurements and shallow groundwater sampling investigations. ...
Manufactured by:AMS, Inc. based inAmerican Falls, IDAHO (USA)
The Male-to-Male Stainless Steel Piezometer Coupler is used to connect the 1-1/4" X 14" SST Piezometer to 1-1/4" X 3' SST Piezometer Extensions. This coupler is crucial for providing the same outside diameter the entire way down the drive string; allowing for an easier push and ...
Manufactured by:AMS, Inc. based inAmerican Falls, IDAHO (USA)
The SST Piezometer Screen #50 Mesh is an internal component to the 1-1/4" (outside diameter) X 14" SST Piezometer. This part can be removed and replaced within the Piezometer for proper decontamination in-between samplings, which is extremely ...
Manufactured by:AMS, Inc. based inAmerican Falls, IDAHO (USA)
Specifically designed for shallow groundwater investigations and long-term monitoring programs, this manually operated sampling kit is ideal for low-flow groundwater sampling and precise water level measurements up to 12 ft. (3.66 m) below ground surface. Built for rugged field conditions, this kit provides a semi-permanent access point for consistent, repeatable data collection across ...
Manufactured by:AMS, Inc. based inAmerican Falls, IDAHO (USA)
The Geotech Geopump™ Peristaltic Pump Series II is an AC/DC combination. It has two pumping stations which can also be piggy-backed for multi-station pumping. The first pumping station has a variable speed of 30 to 300 RPM and the second station 60 to 600 RPM. It also comes equipped with a carrying case and battery. A peristaltic pump often is a good choice for obtaining samples collected ...
Manufactured by:AMS, Inc. based inAmerican Falls, IDAHO (USA)
This adapter is used to drive Piezometer sampling accessories by simply placing it over the Male-to-Male SST Piezometer ...
Manufactured by:AMS, Inc. based inAmerican Falls, IDAHO (USA)
The 1-1/4" (outside diameter) X 14" SST Piezometer drive point can be connected to any 3' SST Piezometer Extension using heavy-duty single-lead threaded couplers. The male/male couplers are crucial for providing the same outside diameter the entire way down the drive string; allowing for an easier push and pull! Unlike other Piezometer designs ...
Manufactured by:AMS, Inc. based inAmerican Falls, IDAHO (USA)
The 1-1/4" X 3' SST Piezometer Extension w/ Coupler is used to reach deeper depths if needed when sampling with AMS's Piezometer. The male-to-male couplers are crucial for providing the same outside diameter the entire way down the drive string; allowing for an easier push and ...
Manufactured by:AMS, Inc. based inAmerican Falls, IDAHO (USA)
1-1/4" Expendable Tips are used instead of the SST Piezometer, to avoid any damage while hammering to target ...
Manufactured by:AMS, Inc. based inAmerican Falls, IDAHO (USA)
#50 Stainless Steel Mesh ...
Manufactured by:AMS, Inc. based inAmerican Falls, IDAHO (USA)
Used as both a drop weight and sampling port, the GVP Dedicated Tip is connected to 3/16" (inside diameter) X 1/4" (outside diameter) Fluoropolymer or Poly Tubing via the Twist-to-Lock Connector, 3/16" Inner Diameter barbed adapter and lowered inside the ...
Manufactured by:Solinst Canada Ltd. based inGeorgetown, ONTARIO (CANADA)
The Solinst Sonic Water Level Meter is a portable, acoustic ranging instrument designed to simply and quickly measure depth to static water level in a well, piezometer, sounding tube, or any closed ...
Manufactured by:Solinst Canada Ltd. based inGeorgetown, ONTARIO (CANADA)
The Laser Marked Model 102 Water Level Indicator is designed to accurately measure groundwater levels in small diameter ...