Show results for
Refine by
Power Testing Equipment Supplied In Spain
41 equipment items found
Manufactured by:Hottinger Bruel & Kjær A/S based inVirum, DENMARK
The HPA-K Amplifier is a dedicated 5 kVA unit optimised for use with the LDS V650 and V780 air-cooled shakers to deliver greater force than if using the PA1000 ...
Manufactured by:Hottinger Bruel & Kjær A/S based inVirum, DENMARK
The SPA-K switching power amplifiers can be used to power legacy LDS air-cooled vibration test systems from the V830 to the V8 and third party shakers and include a unique remote control capability that allows the user to control the amplifier remotely via a ...
Manufactured by:Hottinger Bruel & Kjær A/S based inVirum, DENMARK
The DPA-K switching power amplifiers are designed for use with water-cooled electrodynamic shakers. They offer a maximum power output of 280 kVA, providing optimum performance for your vibration test ...
Manufactured by:Hottinger Bruel & Kjær A/S based inVirum, DENMARK
The PA series of linear power amplifiers ranges in power output from 25 W to 1000 W and are designed to support LDS vibration test system's power both permanent magnet shakers and small electrodynamic shakers. These amplifiers are also used extensively to power 3rd party ...
Manufactured by:EuroSMC S.A. based inMadrid, SPAIN
It is the only micro ohm meter in the market that integrates both the contact resistance and the dynamic resistance measurement (DRM) for cost-efficient condition evaluation of contacts in SF6 and vacuum type circuit breakers; PRIME is a high current micro-ohmmeter that provides true pure DC with smart control up to 200 A, a wide measurement range with high power, dual ground ...
Manufactured by:EuroSMC S.A. based inMadrid, SPAIN
It is the only micro ohm meter (also known as Ductor) in the market that integrates both the contact resistance and the dynamic resistance measurement (DRM) for cost-efficient condition evaluation of contacts in SF6 and vacuum type circuit breakers; PRIME is a high current micro-ohmmeter that provides true pure DC with smart control up to 600 A, a wide measurement range with high ...
Manufactured by:Cinergia Power Solutions based inArgentona, SPAIN
GE+ vAC is a 4Q programmable AC Voltage Source designed to create both stable and distorted AC grids with a predefined IEC testing software. This cost-competitive Bidirectional and Regenerative solution allows Independent phase configuration of: voltage rms, phase angle, frequency and harmonics. It is a device suitable to perform AC testing in Applications for ...
Manufactured by:PCE Instruments based inMeschede, GERMANY
The PCE-PA6000 is a versatile tabletop power meter designed to measure various electrical parameters including effective power, apparent power, power factor, energy consumption, current, continuous voltage, resistance, and frequency. This device is compatible with industrial current converters, featuring a transmission ratio of ...
Manufactured by:Milkrite | InterPuls S.p.A based inAlbinea RE, ITALY
Our vacuum pumps deliver outstanding dependability. Their innovative designs minimize moving parts and replacing vanes is simple and inexpensive. We supply both monophase and triphase rotary vane vacuum ...
Manufactured by:Cinergia Power Solutions based inArgentona, SPAIN
The GE/EL+ vAC/DC is the most complete and versatile converter in the regenerative energy testing market. This product gets-together the whole CINERGIA’s catalogue in a single unit combining the functionalities of a Grid Simulator (GE), an Electronic Load (EL) and a DC Bidirectional (B2C). This All-Terrain converter is suitable for most applications in the field of ...
Manufactured by:EuroSMC S.A. based inMadrid, SPAIN
The Mentor 12 is the most advanced three-phase relay test set available for type and field testing of electromechanical and digital protections of any kind, in traditional or IEC-61850 based ...
Manufactured by:Intersam, S.L. based inArganda del Rey, SPAIN
Applications and models: The cube-shaped evaporators are placed on the ceilings and floors of cold and cold storage rooms of all kinds. The range of cubic ammonia evaporators Intersam is composed of 4 main series for high (INHA). medium (INHM), low (INHB) and very low temperatures (INHT). Thanks to its 60x60 square configuration, a greater heat exchange surface is ...
Manufactured by:Intersam, S.L. based inArganda del Rey, SPAIN
Applications and models: Intersam commercial cubic evaporators are ideal for ceiling mounting in cold and cold storage rooms of all types. This range of evaporators is composed of three main series for high(ICA), medium (ICM) and low temperature ...
Manufactured by:HT Italia S.r.L. based inFaenza (RA), ITALY
Multifunction TRMS DMM, Safety test on electrical plants and Wire mapping Test on LAN cables. M75 is an innovative instrument which joins together DMM, Safety Tester and LAN checker features inside a compact and ergonomic user-friendly structure and with a extremely reduced weight (800g only!). The DMM is a professional instrument with TRMS measurement of AC/DC voltage, AC Current (through ...
Manufactured by:Digitron Italia S.r.l. based inFerentino, ITALY
In a highly portable package, it can not only measure pressure precisely with a built-in pressure sensor, but can also read the current or mV produced by the transducer, and can even supply an excitation voltage to power sensors or transmitters during calibration. To reach 0.025% F. S. accuracy over ranges to 10,000 psi (700 bar) and 0.1% F. S. accuracy over range to 36,000 psi ...
Premium
Manufactured by:KISTERS AG based inAachen, GERMANY
The IP datalogger iRIS Under Cover has been designed and constructed for use in harsh outdoor and industrial environments. It is compact, cost effective and easily con?gured, with support for a wide range of instrumentation. The compact unit facilitates installation within HyQuest Solutions’ raingauge enclosures. The single communication slot supports either a wireless 3G or 4G modem. ...
Manufactured by:INTERmedic Arfran based inBarcelona, SPAIN
INTERmedic’s PL3D is a revolutionary laser system, specially designed for the minimally invasive treatment of the vertebral disc prolapse. The laser procedure is effective, fast and safe, reducing intradiscal pressure by shrinkage caused by the laser energy. The reduction of intradiscal pressure with PL3D laser has revolutionised intravertebral surgery: a small part of the nucleus pulposus ...
Manufactured by:Thermotron Industries based inHolland, MICHIGAN (USA)
Designed to test a product’s resistance to extremely dusty, desert-like environments, Thermotron’s Sand and Dust Climatic Chamber meets automotive and other test specifications. Powerful blowers intermittently blow compressed air up through finely powdered sand and dust and then allow the sand and dust to settle back down covering the ...
Manufactured by:Eaton Corporation based inCleveland, OHIO (USA)
Eaton’s Bypass Isolation Contactor Type Automatic Transfer Switches include dual automatic switching mechanisms that provide redundancy for critical applications. The ATS distributes electrical power to the load, while the automatic bypass serves as a backup. When the ATS is isolated for test, power is routed through the automatic bypass ...
Manufactured by:Pegasor Oy (Ltd) based inTampere, FINLAND
Pegasor Particle Counter PPC is a complete, stand-alone measurement system for regulatory PN-PTI testing. Powered by the Pegasor G2 particle sensor, the PPC is an easy-to-install system for fast and reliable testing of particle emissions from engine or vehicle tailpipe. The system fulfills all requirements and recommendation set in EU for for ...