Show results for
Refine by
Applications
- Particle Measurement Instruments for Non-Exhaust Vehicle Emissions
- Particle Measurement Instruments for Engine Emissions
- Laboratory and industrial ovens and furnaces solutions for research / university industry
- Process analyzers & instruments for continuous emissions monitoring
- Particle Measurement Instruments for Non-Road Engine Emissions
- Stack emissions monitoring
- Laboratory and industrial ovens and furnaces solutions for electronics industry
- Laboratory and industrial ovens and furnaces solutions for materials research sector
- Monitors, gas analyzers solutions for ISO 14644-1/2: 2015 insights & solutions
- Air Pollution Measurements for Education
- Stack Emission Sampling for Emission Dust Sampling Options
- Stack Emission Sampling for Heavy Metal Sampling System
- Stack Emission Sampling for Mercury Sampling System
- Stack Emission Sampling for Hydrochloride Acid Chimney Sampling
- Stack Emission Sampling for Dioxin Sampling
- Emission monitoring for cement plants
- Measurement solution for WID Emissions Monitoring
- Measurement solution for QAL2 EN 14181
- Industrial monitoring solutions for the gas analysers areas
- Fire detection solutions for the power stations sector
- On-Line gas, particulate analyzers, flow monitors, data acquisition for combustion
- On-Line gas,particulate analyzers, flow monitors, data acquisition for cement plants
- On-Line gas,particulate analyzers, flow monitors, data acquisition for glass works
- On-Line gas,particulate analyzers, flow monitors, data acquisition for process control
- Process analyzers & instruments for sulfur pit gas
- Process analyzers & instruments for tail gas treating unit (TGTU)
- Process analyzers & instruments for NOx emissions
- Mercury Analyzers for Mercury Monitoring Toolkit
Sampling Probe Equipment Supplied In Spain
222 equipment items found
Manufactured by:Manvia - JCT Analysentechnik GmbH based inGijón, SPAIN
The standard probes, welded typically are constructed of pipe or heavy-wall tubing and are welded to a flange, to install on process. This type of probes are very resistant to temperature, stresses, pressure, vibration and erosion. However, because welded probes cannot be removed while the process is active, they are more difficult to maintain. ...
Manufactured by:Manvia - JCT Analysentechnik GmbH based inGijón, SPAIN
Isokinetic Steam Sampling Probes are used to obtah a representative sample from the saturated and superheated steam An appropriate analysis system starts with a correct sampling probe n process. If we do not take a representative sample process, we will never be able to have a reliable analysis ...
Manufactured by:Manvia - JCT Analysentechnik GmbH based inGijón, SPAIN
Isokinetic Steam Sampling Probes are used to obtain a representative sample from the saturated and superheated stearn An appropriate analysis system starts with a correct sampling probe in process. If we do not take a representative sample process, we will never be able to have a reliable ...
Manufactured by:Sensotran based inEl Prat de Llobregat, SPAIN
In compost plants, O2 is controlled to verify that aerobic fermentation is in the correct process. With the probe we stick directly in the compost pile to measure O2 levels and control if the reaction is ...
Manufactured by:Protea Limited based inMiddlewich, UNITED KINGDOM
Fixed or mobile sample probes, stainless steel or PTFE lined, Protea is able to provide a solution to measurement from any sample point. With integrated sample filters of ceramic, PTFE, or microfiber construction these probes ensure that the sample passing to the analytical equipment is of ...
Manufactured by:M&C TechGroup based inRatingen, GERMANY
Gas sample probe type SP2000‑H with external ceramic filter type S‑2K150, filter porosity: 2 µm, with electrically heated external filter 0 to 180 °C, adjustable by an integrated thermostat, high‑temperature limiter with reset key responding at +30 °C Tset and low‑temperature alarm with potential‑free status‑alarm contact at ‑30 °C below Tset, ...
Manufactured by:Protea Limited based inMiddlewich, UNITED KINGDOM
The HP5 heated sampling probe is ideal for the determination of particulate matter and chemicals in the gas phase.Its unique design, combined with the clamps-free slide and lock device, allows the probe to freely rotate around its axis, which is needed for the swirl angle determination in accordance with the EN16911 and US EPA M1/2 – this ...
Manufactured by:Protea Limited based inMiddlewich, UNITED KINGDOM
For measurement of gases that do not require hot measurements, Protea can supply sample probes of various material construction. This includes probes made of materials such as PEEK allowing for measurement of possible corrosive ...
Manufactured by:M&C TechGroup based inRatingen, GERMANY
Gas sample probe type SP2000 with external ceramic filter type S-2K150, filter porosity: 2 µm, filter element seal and cover seal out of Viton, mounting flange: DN 65 PN 6B with G 3/4" f connection, material: SS 316Ti, Viton, ...
Manufactured by:M&C TechGroup based inRatingen, GERMANY
Gas sample probe type SP2000-H with external ceramic filter type S-2K150, filter porosity: 2 µm, with electrically heated external filter 0 to 180 °C, adjustable by an integrated thermostat, high-temperature limiter with reset key responding at +30 °C Tset and low-temperature alarm with potential-free status-alarm contact at -30 °C below Tset, ...
Manufactured by:Protea Limited based inMiddlewich, UNITED KINGDOM
The CP5 is a modern version of the classic unheated cold sample probe for the isokinetic sampling of particulate matter in stack emissions. The CP5 design and construction follow the philosophy of being easy and practical to use on the stack. The CP5 is fully realized in AISI316 and is supplied including the AISI316 inner tube, thermocouple and ...
Manufactured by:M&C TechGroup based inRatingen, GERMANY
Gas sample probe with filter housing and mounting flange made of stainless steel. With ceramic filter element, other filter materials are optional. Adaption to nearly all process conditions due to its compact and modular design. Easy installation and low maintenance. Low dead volume. Material of sample-contacting parts: stainless steel, FKM, ...
Manufactured by:AMS, Inc. based inAmerican Falls, IDAHO (USA)
The AMS Brown Moisture Probe is a modified tile probe used primarily by agricultureal scientists and farmers to survey soil to depths of about 3-ft for the purpose of determining the depth of soil moisture storage following irrigation. The probe offers visual confirmation of soil moisture conditions, and this data is used to help determine crop yield goals, planting decisions, irrigation water ...
Manufactured by:Dekati Ltd. based inKangasala, FINLAND
Set incl. 11 pcs stainless steel sampling probes (3,45- 3,81-4,16-4,57-5,0-5,46-5,92-6,71-7,62-8,69-9,9 mm). Sampling probes can be directly connected into SAC-65 sampling cyclone inlet (R3/8") or IPR-500. Set includes also 11 pcs Cu gaskets 17/21x1.5 ...
Manufactured by:Tecora based inVillebon-sur-Yvette, FRANCE
Heated isokinetic sampling probes are deigned for dust measurements in accordance with ...
Manufactured by:M&C TechGroup based inRatingen, GERMANY
Gas sample probe type SP2000-H with external ceramic filter type S-2K150, filter porosity: 2 µm with electrically heated external filter 0 to 180 °C, adjustable by an integrated thermostat, overtemperature limiter with reset key responding at +30 °C Tset and undertemperature alarm with potential-free status-alarm contact at -30°C below Tset, ...
Manufactured by:M&C TechGroup based inRatingen, GERMANY
Gas sample probe type SP2000, with external ceramic filter type S-2K150, filter porosity: 2µm, filter element seal and lid seal out of Viton. mounting flange: DN65PN6B with thread G3/4'i.ion material: SS316, Viton, ceramic. Regulated Heated / Non-Heated Gas Sample Probes with ceramic filter element outside, optional: ...
Manufactured by:M&C TechGroup based inRatingen, GERMANY
Gas sample probe type SP2000 with external ceramic filter type S-2K150, filter porosity: 2 µm, filter element seal and cover seal out of Viton, mounting flange: DN65PN6B with G 3/4" i connection, material: SS 316Ti, Viton, ceramics With ceramic filter element outside, optional: other filter materials, various possibilities of back purging and calibration ...
Manufactured by:M&C TechGroup based inRatingen, GERMANY
Gas sample dilution probe type SP2000-H/DIL with external ceramic filter type S-2K150, filter porosity: 2 µm, electrically heated external filter 0 to 180 °C adjustable by an intgrated thermostat, overtemperature limiter with reset key responding at +30 °C above Tset and undertemperature alarm with potential-free status-alarm contact at -30 °C ...
Manufactured by:M&C TechGroup based inRatingen, GERMANY
Gas sample dilution probe type SP2000-H/DIL with external ceramic filter type S-2K150, filter porosity: 2 µm, electrically heated external filter 0 to 180 °C adjustable by an integrated thermostat, overtemperature limiter with reset key responding at +30 °C above Tset and undertemperture alarm with potential-free status-alarm contact at -30 °C ...